Stump the motorhead can you? (Bet not!)
Ok the other post got me flowin... How about some automotive trivia to test me? Because of my queerness for all things automotive, I've amassed a Cliff Clavinesque knowledge of all things automotive....so bring it on....
Now, let's not get into part numbers for the AIS motor on a 92 chrysler 3.8, but real 'My cousin vinnie stuff'. keep it in american cars, Drag racing, muscle cars and equipment, stock cars, hot rodding etc.....can ya top me? (without google?)
Bring it, cupcake!
Now, let's not get into part numbers for the AIS motor on a 92 chrysler 3.8, but real 'My cousin vinnie stuff'. keep it in american cars, Drag racing, muscle cars and equipment, stock cars, hot rodding etc.....can ya top me? (without google?)
Bring it, cupcake!
0
-
what would the cid of a dodge 383 bored .40 over with a 440 crank be, and typical horsepower with 1 750 carb 0 -
What was the name of Div 7's 2008 Alcahol Funny Car champion Sean Bellamure's Dad, and what class did his dad drive in? 0 -
what was the first production bodied car to break 300 MPH at Bonnaville, and what team built it? 0 -
the 77-79 Ford Ranchero is based on what ford body style? 0 -
What year and option Corvette was Zora's favorite? 0 -
What production car used a Franklin helecoptor engine? 0 -
No.
Yes.
Yes.
Yes.
No.
and
No.0 -
What was the intake and exhaust valve settings for the 350 cubic inch solid lifter engine in a stock 1970 Z-28 Camaro? 0 -
What rubber compound did goodyear use for their most recent wrangler tire. 0 -
it would be a 417ci.. cam? Ignition?, balanced? hydraulic or solid lifter? single or dual plane intake? roller rocker? roller tip rocker? be specific... (not really specific)
figure about 400-450 horse at 10:1 cr. using 'b' heads? rb heads? Mopar HP heads?0 -
what is the difference in a 1966 and a 1967 CHEVELLE dash if any[?] 0 -
I think the Ford FMX transmission was in production until about 1982. but it has been essentially unchanged since... WHAT year did it first appear? 0 -
quote:Originally posted by rcrxmike_2
it would be a 417ci.. cam? Ignition?, balanced? hydraulic or solid lifter? single or dual plane intake? roller rocker? roller tip rocker? be specific... (not really specific)
figure about 400-450 horse at 10:1 cr. using 'b' heads? rb heads? Mopar HP heads?
509cid with 650 hp, i built one, 440 crank adds a loong stroke0 -
that little plastic thing that they put in at the factory but falls out of the transmission (70's) and stays in the tranny oil pan for the life of the car, is called a (what?) 0 -
quote:Originally posted by Old-Colts
What was the intake and exhaust valve settings for the 350 cubic inch solid lifter engine in a stock 1970 Z-28 Camaro?
Let me try this one was it 36 intake 34 exhaust (we are talking about lash correct)0 -
quote:Originally posted by buschmaster
the 77-79 Ford Ranchero is based on what ford body style?
firat, the falcon, then the fairlane, then the torino.....0 -
quote:Originally posted by Mk 19
What production car used a Franklin helecoptor engine?
Tucker...(boy, did that guy take a screwin from the big three or what)0 -
quote:Originally posted by buschmaster
that little plastic thing that they put in at the factory but falls out of the transmission (70's) and stays in the tranny oil pan for the life of the car, is called a (what?)
assembly plug in a chrysler, got me on a GM0 -
quote:Originally posted by rcrxmike_2
quote:Originally posted by buschmaster
the 77-79 Ford Ranchero is based on what ford body style?
firat, the falcon, then the fairlane, then the torino.....
ok, torino up to '76. how about 77-79?0 -
What year did the Cummins Diesel sit on the pole at the Indianapolis
500? and how did it finish?0 -
quote:Originally posted by Mk 19
what was the first production bodied car to break 300 MPH at Bonnaville, and what team built it?
GM F-Body... Trans Am?0 -
quote:Originally posted by rcrxmike_2
quote:Originally posted by buschmaster
that little plastic thing that they put in at the factory but falls out of the transmission (70's) and stays in the tranny oil pan for the life of the car, is called a (what?)
assembly plug in a chrysler, got me on a GM
whoops! ford. it was in my FMX tranny pan and the guy at the shop told me what it was. it's a "popsicle".0 -
quote:Originally posted by cartod
What rubber compound did goodyear use for their most recent wrangler tire.
Falls under 'part Number' deal......c'mon.....0 -
did corvette ever have a 6 cyl 0 -
what type of car held the record at talladega for over 12 years, should be easy 0 -
quote:Originally posted by cartod
What rubber compound did goodyear use for their most recent wrangler tire.lambskin?0 -
quote:Originally posted by 1911a1fan
quote:Originally posted by rcrxmike_2
it would be a 417ci.. cam? Ignition?, balanced? hydraulic or solid lifter? single or dual plane intake? roller rocker? roller tip rocker? be specific... (not really specific)
figure about 400-450 horse at 10:1 cr. using 'b' heads? rb heads? Mopar HP heads?
509cid with 650 hp, i built one, 440 crank adds a loong stroke
soory...did math with 3.75 stroke...bout another?
(PS last mopar I worked on: 13.75:1 440, .030 over, 67 hp heads, harland Sharp rockers, 6 pack, electronic ign, 677 hp @7250 rpm......0 -
quote:Originally posted by CHEVELLE427
did corvette ever have a 6 cyl
Yes, 'blue Flame' 6...53,-5,0 -
quote:quote:
Originally posted by Mk 19
what was the first production bodied car to break 300 MPH at Bonnaville, and what team built it?
GM F-Body... Trans Am?
Very good, Jerry Kugel and his son's built the car0 -
quote:Originally posted by 1911a1fan
what type of car held the record at talladega for over 12 years, should be easy
Mopar first, (buddy Baker) then Bill Elliot, 212 in a t bird, before nascar killed 'real' racing.....0
Please sign in to leave a comment.
Comments
114 comments