Mechanic question
Does anyone know the socket/nut size of the front wheel bearing nut on a '92 Olds Bravada? I'd assume it's likely the same as a similar year model Chevy Blazer. My socket set has disappeared.
0
-
Daughter has a '95 Mustang. Having braking problems. Brakes don't grind or squeak. No loss of fluid. Peddle is good (stiff).
But they just doesn't stop the car reliably. They will slow it down to an eventual stop. But nothing you can count on in a short distance.
I thought I'd had about every kind of brake malfunction one could have. But this is a new one. Exhibits 0 symptoms of usual brake problems (except of course failure to stop car).
I can do break jobs. But won't have time for a few days. Until then she can drive one of our vehicles. But just curious.
Anyone ever experience this? What might it be?0 -
PLEASE NOTE: I AM NOT A MECHANIC. I CAN CHANGE OIL, TAKE TIRES OFF, AND HAVE A SET OF METRIC TOOLS, BUT I AM NOT VERY EXPERIENCED WITH THE GUTS OF ENGINES.
With the above said, I am happy to report that I am continuing on my committment to never drive a car that I paid more than $1500 for. I manage to stay mobile in various cars that are given to me or that I buy cheap. I see no benefit to driving a $25,000 car when for a little sacrifice of ego I can motorvate in economical style. Currently, I am driving a 1995 Cadillac that was a friend's mother's car. Great ride but not so good through the woods fishing and hunting.
I just got a 1985 Mercedes Benz 300TD Wagon that is in real good shape. Everything works well and it drives great. Cruise, air, AT and good tires and breaks. 291,000 miles is rumored to be just about broken in on this car!
I need a driver's seat, or need to have this seat redone. Is this easily done by an auto upholstery shop, or should I buy a seat from JC Whitney for $159?
Ideas, questions, concerns, comments, complaints....all are welcome.0 -
Here's the problem. I have a '95 Chevy Z-71 that I recently had a new motor put in. Ever since the motor swap, when I try to start the truck, the motor will not turn over very fast, as if the battery is almost dead. After I replaced the battery, it seemed to help a little, but it has went back to the same old thing. So then I replaced the alternator, thinking that it might be that. Nope, still does it. Checked all the connections, and haven't found anything wrong there. Today, it done the same thing. To the point that it wouldn't turn over. Set there a few minutes, tried to start it again, and it started right up, as if there was no problem at all.
So, what might the problem be? Am I looking over something simple? Thanks in advance, oh wise ones.0 -
Just talked to my dad. The breaks on his '89 Ford Taurus are looked up. Drove it last week, everything fine. Parked in garage, now it won't budge. What the heck would cause that? 0 -
My '93 F-150 w/4.9 6 overheats when sitting still. Like in traffic jam or at idle. Runs/cools fine when moving. Any idea what might be problem? 0 -
While driving my brother's 06 ford f350 diesel pickup, the truck just died. Could not get it started again. Towed it home, replaced the fuel filters,and still nothing. I am getting fuel to the top fuel filter, but it wont start. Any ideas? 0 -
The driver side front wheel of my '88 Ford F-150 is pulling severely to that side. Jacked it up and wheel is nearly locked up. Will barely turn w/force. But no wobble or screeching sound that in my experience go w/bad bearings.
Pulled the outer bearing. A lttle dry, but looked OK. No metal frags inside hub. Packed a bunch of grease in hub (to hopefully work into inner bearing. Packed outer bearing, took test drive. Still pulling.
I'm thinking the brake is somehow grabbing. Is there any "Easy Fix" to this that doesn't require removing the brakes? Your thoughts?
BTW: Put new fan clutch on the 93 yesterday. Just what the doctor ordered! Thanks for the info help!0 -
I drive a 2000 Jeep Cherokee, 6-cylinder engine, manual tranny, 99,000 miles. Yesterday, drove to a friends house, stayed a few minutes, and when I went to leave, Jeep wouldn't start. No electrical power at all: door buzzer wouldn't buzz, no lights worked at all, etc. Starter wouldn't "click" or anything. Nothing! Boosted it off, and it started and ran ok until cables were removed, then it would die. Figured the battery had shorted out somehow. Had to hook the jumper cables back up to roll the windows up before I left it, but this time it started and ran OK. Quickly drove it home, but the "check gauges" light was on, and the voltometer was pegged out, showing a charge of 20 (as hight as it will show!). Got home, and it promptly died. No power, nothing, nada, same as before. Went out last night to remove the battery so I could take it to town today to have it checked. Raised the hood, and the underhood light worked! Tried to start it, and it started right up, voltometer was right where it should have been, and everything seemed fine.
Sorry for the long description, but what could have happened, and what do I need to check to keep it from doing this again?
Thanks!0 -
My daughter has a 2000 Grand Prix/3.8 V-6 that won't run. From what they describe to me, it will start and run fine w/no misses etc for a few minutes in the morning. Then die and will not re-start for the rest of the day.
Any ideas as what problem might be?0 -
My parents own a '98 Dodge Dakota pickup w/a V-6 engine. Yesterday it overheated. Today I investigated and found that a valve (heater control valve) on the heater hose was leaking. A trip to both Autozone and O'Reilly's reveal that a replacement is unavailable (through them at least).
Can this valve be bypassed by adding a piece of tubing between the hoses? And if so, what about the vacuum line that also attached to he valve? Any help appreciated.0 -
Well, kind of. My daughter has 2003 Chevy Ex/Cab pickup purchase used recently. Has a flat, can't find the jack. I will go there tomorrow. Where is the jack supposed to be? 0 -
Take the starter off and bench test it. 0 -
Bad bendix or starter brushes maybe? 0 -
Look for a loose ground wire if none found Suspect that the starter does not enough power to crank new engine over.
Was this a new engine or just a lower mileage used engine?
from the sound of your problem I would guess that you have a loose ground. Check all of the connections on the strarter it is very easy to miss one of those wires when hooking up the wiring harness[;)]0 -
Is it a factory Spec Motor?
After building the Motor in the Mustang (upped to a 11:1 compression) it is tough to turn.0 -
sounds like someone wore out the starter motor trying to start a new engine. 0 -
The motor is a factory replacement one. All of the extras off of my motor was swapped to the new motor, the starter, power steering pump, stuff such as that. 0 -
Check the ground first then try the starter out of the motor i believe autozone can test it if you are unsure. 0 -
had same problem with my dodge on and off for a while
place a ground strap from a good ground to the starter, sometimes not a good enough contact between starter base and motor0 -
quote:Originally posted by oldemagics
had same problem with my dodge on and off for a while
place a ground strap from a good ground to the starter, sometimes not a good enough contact between starter base and motor,Or engine to body...[;)]0 -
I had the same problem with my truck. It needed a new starter. 0 -
yeah, sounds like a bad earth wire..i had a similar thing once, it drove me nuts trying to find out what the problem was. 0 -
starter might need to be shimed especially if it's the 2 bolt type too tight against the flywheel 0 -
quote:Originally posted by savage170
starter might need to be shimed especially if it's the 2 bolt type too tight against the flywheel
+10 -
If it has a side terminal battery, the positive terminal can come loose inside the battery. 0 -
A lot of times this happens when the new engine is painted, and the person doing the swap doesn't clean the paint off where the starter mounts, as well as where the ground cable goes onto the engine. Take the starter off and sand off the paint. 0 -
take it back and let them know that this problem wasn't happening before the worked on it[;)]. Seems to work around the shop I work at. 9 times out of 10 it is something those dirty greese monkeys did[:p][:)] 0 -
Check ground, and if alternator is not on a serpentine belt, check belt tension. If that is not it, take it back! 0 -
quote:Originally posted by Flying Clay Disk
Just out of curiosity, how much did the motor swap set you back?
Motor swap was about $1800. Had to replace a few parts, and a little work done in the transfer case. All told, around 3 grand.0 -
Not ground wire . ground strap. Goes between the engine and frame. may be one on both sides. Or sould be one on each side should also be one going to the truck cab at the firewall.
One of the most often left off items. also wears out but does not show it.0
Please sign in to leave a comment.
Comments
42 comments