Glocks - all flavors
So how many of you make changes to your factory Glocks? How many, like me, order the new parts when ordering the Glock. Or do you just keep it factory stock - and why?
Ever since my first Glock 17 I have always changed the trigger out for a quality aftermarket like a Pyramid, Zev or most recently Timney before firing the pistol for the first time.
Depending on the need - I'll make other changes.
-
I'm still upgrading from Flint lock to Percussion cap.
12 -
No need for me! No Glocks for me!
0 -
Perfection!
12 -
Bone stock is good enough for me.
6 -
Glocks are like Legos! So fun. But the heard mentality is strong around here, and some of these guys decided in 1982 Glocks were bad & they literally have been unable to form an objective opinion since.
Here’s my Gen 5 34 with Trijicon SRO that took me all the way to USPSA Nationals.
12 -
I don't know why but "Lipstick on a pig" comes to mind. Don
18 -
12 -
Might have won with a real gun!
6 -
@Warbirds is correct, they are like legos......very expensive!
To each their own. Ive never owned one, just cause.....no real reason.
That being said, I do have several 10-22s that are also upgradable like legos BUT mine are all stock, except a scope is added!
0 -
I have a standing offer on this forum to shoot ANY USPSA or IDPA match straight up for guns.
If you can beat me, you can have my Glock.
So far this group is as they say in Texas, all hat; no cattle.
39 -
I bought my first Glock in 1995 and have purchased several since then. For the most part they are stock guns, but I have added different sights and red dots to some of them. I used to shoot a few local matches with them when I was younger but only do that occasionally now.
I like them, but still prefer a decent 1911. Glocks are a tool that can be used right out the box or tweeked in a 100 different ways. To each their own.
3 -
@Warbirds, "Put Up, Or Shut Up," Trumps All. 👍
I LOVE it. 😁
18 -
William81: 30364394207899/comments/
I bought my first Glock in 1995 and have purchased several since then. For the most part they are stock guns, but I have added different sights and red dots to some of them. I used to shoot a few local matches with them when I was younger but only do that occasionally now.
I like them, but still prefer a decent 1911. Glocks are a tool that can be used right out the box or tweeked in a 100 different ways. To each their own.
That's just about when I bought my first Glock 17. Ended up giving it to a friend because I couldn't shoot a decent group with it. Same problem for him so he asked me to replace the trigger for him. Wow, sorry I sold it. Liked it so much with the new trigger that I bought a couple more, replacing the trigger sets on each of them. Now I have a bunch, in different lengths, calibers and builds.
One that surprises me the most is my Glock 21, in 45ACP. With the exception of a Pyramid trigger and adj Night sights, it is a factory pistol - it groups as nice as many of my Colt, Springfield and Kimber1911s at 21 yds.
18 -
1st congrats warbirds thats some awesome shooting
I do not own one no reason other than just never got around to buying one or three 😁
i was a true hold out on 'plastic. " guns agin no real reason just old set in my ways
I do remember the first time I actually ran across a glock dealer at a local GS
I remember it well
he was trying to convince the people to buy one he even pulled the slide off his and then beat the crap out of the frame rails on the corner of the table and said any of you steel frame gun owners willing to let me do that with your gun .. no answer of course 😉
even years later I liked the look of a polished blue or SS pistol over a glock no frills look
my youngest son has a couple ( as far as I know he still has them ) a model 19 and one he doid th epaper work on to make a SBR out of it
close as came I did give in some time back bought a springfield xdm my son had bought one and I liked it
' than came the xds 45 and last a xds 9mm still no glock 🤨 but three polymer pistols is more than I thought I would ever own
I carry the xds models as my cc pistols and have crimson trace laser grips on both .
the first xdm 45 I bought was confined to house duty along with its older steel buddies 😁
3 -
I trade out the mag button and the slide release for the extended versions, but I always use OEM Glock parts to do it. My 35 wears a set of Dawson Precision fiber optics and the 23 wears Trijicon night sights, but it came from the factory like that. The 24 is completely stock and will likely remain that way.
3 -
Paper doesn't shoot back.
(stir, stir)
18 -
...I don't do BLOCKS...I stick with the original, John Brownings Colt 1911...have 7 or 8 in the safes...sorry, I just don't do ugly...
15 -
It's in my will, I'm to be buried with my Colt 1911.
21 -
I only own one Glock. A mdl 22 (.40 cal) "Police Trade In." Carried a lot, not shot often. ($300 if I remember correctly.) It has Trijicon Night Sights. I bought it because it shares mags with my Kel Tec Sub2K. Both reside in a small "Get Home" backpack in my Jeep. It was primarily put together when I worked 33 mi. from home. (Now I'm about 7 mi away.)
Just added a ProMag 50 round drum mag for the Sub2K. Already had about 4-5 SMG 31 rounders. Pretty good amount of firepower in a very small pkg.
I'd like to get the grip some "grip" akin to @Warbirds. A new trigger would be nice as well. I've not shot mine much, but from what I understand, a new trigger would tighten up my groups. Not too bad already.
3 -
I fell in love with the Springfield .40. I turned a raccoon inside out with one of my HP reloads. Then later I bought a Springfield .45, which is my winter carry gun.
Joe
6 -
jimdeere: 30364394207899/comments/
Paper doesn't shoot back.
(stir, stir)
Sir- If you are inviting me to a duel, I declare, your challenge accepted!
12 -
Ha! Not on your life!
0 -
Texas1911DE: 30364394207899/comments/
...I don't do BLOCKS...I stick with the original, John Brownings Colt 1911...have 7 or 8 in the safes...sorry, I just don't do ugly...
I probably have about the same or a few more 1911's. But that's kinda like saying I already have a car, I don't need a truck. Glock is a tool and is often the best tool for a particular job - As is a 1911. If you purchase your firearms based upon "pretty" then you are missing out on some great shooters.
12 -
Picked up a Glock 43X added night sights and a Shield Arms mag release + 4 Shield Arms 15rd mags.
I hate to say it but it has without a doubt replaced my Glock 19 and Glock 26 for CCW. I shoot it just as well.
I might trade it for one that is RMR cut. I haven't made the switch to pistol red dots yet, though.
9 -
drobs: 30364394207899/comments/
Picked up a Glock 43X added night sights and a Shield Arms mag release + 4 Shield Arms 15rd mags.
I hate to say it but it has without a doubt replaced my Glock 19 and Glock 26 for CCW. I shoot it just as well.
I might trade it for one that is RMR cut. I haven't made the switch to pistol red dots yet, though.
I've had two cut from these folks - https://www.battlewerx.com/
I found their prices very competitive and the quality of their work was awesome. Be sure to consider if you want the cut to eliminate your rear sight or forward of it so you can co-witness. If you do dump the rear sights then grab a front sight plug https://www.agencyarms.com/front-sight-plug-5 from Agency arms. Makes for a clean slide. You can kinda see it in the G17 with the red magwell above.
6 -
MPistone: 30364394207899/comments/
https://forums.gunbroker.com/discussion/comment/11379760#Comment_11379760
I've had two cut from these folks - https://www.battlewerx.com/
I found their prices very competitive and the quality of their work was awesome. Be sure to consider if you want the cut to eliminate your rear sight or forward of it so you can co-witness. If you do dump the rear sights then grab a front sight plug https://www.agencyarms.com/front-sight-plug-5 from Agency arms. Makes for a clean slide. You can kinda see it in the G17 with the red magwell above.
Thanks I'll keep that in mind. While I'm all for red dots on rifles I still haven't made the switch to pistol red dots. I have Glock 19 set up with a Vortex Viper and don't care for it. I feel like I'm chasing the dot or the sun washes out the screen.
A shop in Springfield will give me the Blue Label Glock discount on a 43X MOS with a copy of my DD214. If they have one with night sights already installed, I might trade mine.
0 -
Not today FBI!
9 -
I'll admit that Glock is usually the last brand on my mind when it comes to handguns, regardless of how good they are, or how well someone can run a course with one. Having said that, I'll also admit that I could see myself with a 40 MOS. Why? I always thought longslides looked kinda cool. Now, if one could find a comped .460 Rowland barrel for it, all the better. That would probably be the one specific Glock I wouldn't pass up. I'll go apologize to my 1911 now....🤣
15 -
Gunnut358: 30364394207899/comments/
I'll admit that Glock is usually the last brand on my mind when it comes to handguns, regardless of how good they are, or how well someone can run a course with one. Having said that, I'll also admit that I could see myself with a 40 MOS. Why? I always thought longslides looked kinda cool. Now, if one could find a comped .460 Rowland barrel for it, all the better. That would probably be the one specific Glock I wouldn't pass up. I'll go apologize to my 1911 now....🤣
Glock G21 Gen3 460 Rowland conversion *ALL ORIGINAL PARTS INCLUDED* - Semi Auto Pistols at GunBroker.com : 968482835
Buy Glock G21 Gen3 460 Rowland conversion *ALL ORIGINAL PARTS INCLUDED*: GunBroker is the largest seller of Semi Auto Pistols Pistols Guns & Firearms All: 968482835Close enough?
3 -
That's actually not bad. Not crazy about the stippling, but it would be workable. Thanks for the link.
3
Please sign in to leave a comment.
Comments
49 comments