Brownells Easy Bake Project Star 9mm
Here is a Star 9mm I took down to bare metal and applied a little Brownells oven cure to. The trigger had to be redone so its in the oven with the slide (its black) baking right now.(I had a little run and messed up the edge of the trigger as you can see in the photo). After baking though this stuff is tuff..
0
-
Man that looks good. Did you say it is tuff and will last? what about cost and time involved? 0 -
It takes a little time, you have to strip the firearm, blast it is recommended (I used 3 grades of abrasive brush wheels on a dremmel) completely degrease it, hang it by wires and lightly spray three or four coats using a hair dryer to set each time, careful no runs! (should have listened to this part better myself that is how I got the oppourtunity to redo trigger.) Make sure fully covered, then no touching, hang in oven and bake @350 for 30 minutes, like Racheal Ray eh! Anyway then cool and your done. 0 -
Dude that is killer! I didn't know they had such a thing. 0 -
Does it come in the two colors you have shown? Does it come in any other colors? What about cost? 0 -
I didn't know Star had compact 1911-type 9mm semi-autos.
Guess I'm [still] out of the loop.0
Please sign in to leave a comment.
Comments
5 comments