Skip to main content
Help Center Community Shop

USED 10mm, or .45

Comments

14 comments

  • royc38
    I have not personally shot the witness in 10mm, but I own a .40cal and .45. They are perhaps the best inexpensive pistols out there. I carry them and they are truely reliable and accurate(more accurate than me). I plan on getting a 10mm Witness one day. I already own two Colt delta elites and I love the 10mm cartridge. The only problem is ammo availabilty.I am currently having one of the deltas fitted with a 40 cal barrel and mag,spring setup so I can switch out ammo. I like having the choice of getting .40 cal for it which is easier to find.
    0
  • Mk 19
    The witness if a very fine gun, accurate, reliable and it is one of the only auto's that properly fit my hand. Try one of each and see which one fits you the best, as I always say "the gun that fits you best is the best fit for you"
    0
  • joker5656
    any chance that the EAA witness can be changed from 10mm to say a .40? that right there would make my mind up right there probably for the most part. that or a Delta Elite, now that i know the barrel and stuff can be fitted for a different cal that's just raised it another notch in my book.

    What about Sig i know they can be changed from on cal to another but do they make a 10mm? i go check right now matter of fact, may give them a call to, if they do and see if its interchangeable w/ other cals.
    0
  • royc38
    Check the EAA website. I believe they can.
    0
  • goldeneagle76
    For that price you can get a new Springfield XD 45. That would be my choice. Other than that, probably a Springfield 1911.
    0
  • drobs
    quote:Originally posted by goldeneagle76
    For that price you can get a new Springfield XD 45. That would be my choice. Other than that, probably a Springfield 1911.


    +1 on both.
    0
  • Nighthawk
    For all around and the range shooting, I would consider the price and availability of 10MM ammo. I dont own a 10MM but no one here has any on hand, seems they usually order it.
    0
  • joker5656
    yeah 10mm isn't readily available but its fun to shoot. i may get it then just buy conversion kit if possible to shoot cheaply when i plan on shooting alot
    0
  • TooBig
    I have and shoot the Witness 10mm and I love it,little expensive to target shoot but it will get the job well done.It's a good go between the 45 and the 40.[:D][}:)][:0]When it's barking it's doing all the talking you need.
    0
  • yoshmyster
    I'm pretty sure Sig doesn't make a 10mm and if you did get the .40S&W Sig and tried to "up" it it might break the frame. Going from 10mm to .40S&W is easier on the gun.

    In your price range you might look in to the 10mm S&W. I got a 1076 (Commander size) and she's just right in my hand and everything.

    But like it's been mentioned if you like the EEA in 10mm get the barrel and magazine in .40S&W. Or get the 10mm now and later get the .40S&W parts later.

    As for the Colts I'd buy one at the "right" price.
    0
  • drobs
    The Witness has a very low resale value. I had one that I had trouble selling.
    0
  • joker5656
    quote:Originally posted by drobs
    The Witness has a very low resale value. I had one that I had trouble selling.


    there won't be reselling this. its going to be a range gun for as long as possible
    0
  • wizard78
    quote:Originally posted by joker5656
    any chance that the EAA witness can be changed from 10mm to say a .40? that right there would make my mind up right there probably for the most part.

    I own the witness in the 10mm/45acp convertible. Both calibers shoot great and I would much rather have a 10mm for a defense gun. A quality made gun that isn't expensive to buy. The 10mm isn't cheap to shoot but deals on ammo can be had or just reload. BambiHunter is the 10mm expert as far as I'm concerned and maybe he'll jump in here to offer his expertise.
    0
  • joker5656
    OK did some research on EAA witness, made in Italy (family is from there so that's a ++++) and to top it off the P class pistol is very versatile and i mean very, it can be changed to a 10mm, 9mm, .40, .45, and .22. so i think i may just do some more research and see how much the different conversions are and buy something smaller or may just get the 10mm. friend got one and it was 450 or around there after tax's

    UPDATE: ANY STEEL FRAME CAN BE CONVERTED TO THE ABOVE, ALSO I MAY BUY A 38 SUPER IF ITS CHEAPER OR THE 10MM IF THE PRICE ISN'T THAT MUCH DIFFERENT.

    thanks for the help guys, now i know what i want and its going to be a steel frame model since its so versatile
    0

Please sign in to leave a comment.

Recent Activity