range report
Finally got the chance to take the Beretta Neos .22 out to the range this weekend. Mounted a Sig red-dot scope on it that I bought from a friend. I put 450 rounds through it(Remington Viper's, Remington Thunderbolts, CCI Blazer's, CCI Velociter's, CCI Stinger's, and Federal blue box. Was really happy with the cycling and had 0 malfuctions, even when I loaded all 6 mags and rapid-fired the 60 rounds. Was very happy with that. I can't even say the same about my Ruger 22/45. Was also pretty happy with the trigger pull. I was a little disappointed with accuracy, not quite as good as my Ruger. It is definitely acceptable, but I am hoping it gets a little better the more I get it broke in and find the ammo it likes best. In the end I am very happy with this little pistol and it should serve it's intended purpose very well(a good little squirrel/plinking gun).
Jon
Jon
0
-
Just got back from the range.
I was able to take out that mini - 14 I have been looking at. Very very, very nice rifle. A definite tack driver, but, neither of the mags that he had for it would feed at all. So we used it as a single shot... gonna go to the gun shop tomorrow and see what I can get a couple of mags for, just to make sure it is only a problem with the magazines. Also took several of the .45's out, the Sig and a couple of Colt's. Every time I fire the Sig, I fall in love with it again, not that Colts aren't nice, jhust the Sig is so smooooooth. Anyway, a good time was had by my sons and I.
If you must burn our flag, please wrap yourself in it first.0 -
Well, I finally had the freetime to take my new Marlin 1895 45-70 out to the range the other day. It was an eventful trip and a nice walk through the Knee deep snow to get to the bench and target, but well worth it[:D]. I shot about 15 shots with Hornady Leverevolution ammo with good results. Zero jams and a pretty decent 3 shot group for shooting freehand (had sandbags with me, but that is a long story) at 25 yards. The square is roughly an inch and a half. Lets' just say I was definitely impressed and I think that I may have a new favorite gun[:0]. The only thing that I can see doing in the future is maybe ordering a set of ghost ring sites to throw on it. 
Jon0 -
A while back I promised to give a range report on the .22-250 I purchased, so here it is. I can't wait to see what some of my reloads will do.
Gun--Remington SPS Varmint .22-250(26" heavy bbl)
Ammo--Remington UMC 45 Gr. JHP
Range--100 yard
Jon0 -
I had three things I wanted to accomplish today, shooting related.
one was to drift the sight on my Browning High Power.
Before
The tools. I sought advice from ATE before I used any of these.
A little bit of marring.
Nothing a black Sharpie cant take care of.
The results. Fired from 15 yards with sand bags (13 shots) GTG for me.
The second item on my list was to mount my new American Defense AD Recon H throw lever mount. I received the mount today and rigged it up with a Leupold VXIII 1.5-5x20. The mounting is so easy that even I didn't have any hiccups. The mount is rock solid and looks good in my opinion. The quality is A+. I will report back at a later date with a repeat 0 test. I have no doubt that the Recon series has Larue looking over their shoulder.


After I bore sighted the carbine I shot some 55 FMJ to get it on paper.
The third thing on my list was to shoot 2 hand loads I had loaded yesterday,Sierra 52 grain HPBT MK and Midway DogTown 55 grain FBHP. Both loads show promise, but my 8 plus pound trigger does not make for bench rest tight groups. My RCBS trigger gauge only goes to 8 pounds. I had free float hand guards on my list to buy, but they are taking a back seat to a Geissele trigger.

And a Group of PMC Noise Makers
A cool hammer tool that has been in the family around 80-90 years.
All put back together.
0 -
My son and I got to take my new Kimber Gold and his new Glock 23 out to the range today.
First off the Kimber is soooo sweet. I wish I had gotten one of this along time ago.
Second, the Glock, this is the first time I have fired a Glock. I am not ready to compare it to the Kimber but I may just have to go get a model 17 or 19.0 -
I bought an Inland M1 Carbine
and it is fun to shoot.
What is odd with this rifle is
that I don't need a scope (tired eyes)
to hit targets (which I am very pleased to say)
Easy to reload, fun to shoot.
I think I'm gonna get a Ruger mini-"something".
Seems pretty close to the Carbine-looks wise.
Any advice on which Ruger to get would be greatly
appreciated.I'm not expecting much in the accuracy
dept. I shoot steel out to 100 yds 12" plates.
I have a RRA .223, I was kind of wondering about
the mini 30.
Thanks-Ron0 -
My neighbor came up to the house this afternoon with a new Colt 1911 target grade pistol. I got out my sig 220 with a laser guide rod, Beretta 92fs, and a Smith 5906. He shot 3 rounds with his Colt from a sand bag sitting position. Group was tight but high and left. He adjusted windage and was hitting high. Re adjusted elevation and was on in in 9 rounds total. Then Its time for the fixed sight pistols. My sig was about dead on with a similar tight pattern. No adjustments necessary. When using the laser, it was 3" left but elevation was fine. The Beretta was close with fixed sights but not as tight a pattern. Now comes the Smith. That has to be the crappiest pistol I have ever shot. 3 round patterns were damn near 5" apart. He is a great shot and his pattern was almost as bad as mine when he fired it. We were shooting at a relatively close range of about 20 yards from a sandbag position on a picnic table. Question is why is the Smith and Wesson 5906 shooting such spratic patterns? That pistol may have been a bad investment and will leave quickly. Then the rain came and we had to quit a little early but him and I had a great time shooting. Total of about 150 rounds down range made for a fine afternoon of shooting. 0 -
A friend of mine went on a buying spree and today was a good day for a hike so we headed out to our closest BLM site to hike and shoot.
We brought nine fire-arms:
S&W 686-6 revolver
Ruger MKIII Hunter
Springfield XD **
FN 5.7 **
Colt Commander 1911A1 *
H&K (some .45ACP thing; I never did figure out the model)**
Ruger Standard Model .22 pistol*
Ruger 10-22 Carbine
22-250 rifle that was somebody else's project gun...a total frankenstein.
* My friend's gun
** My friend's NIB gun
My guns all performed like they usually do except that the 10-22 was having some cycling/feeding issues. I've been messing with that one so it might be my fault.
My friend's guns were more interesting because they were mostly new to us. We both really liked the Colt. We both really, really like the FN. It's got a nice little pop to it without too much kick, the trigger's decent and it is, in the end, just a damn fun gun. I'm not sure how practical it is, but then who needs a good reason to buy a fun gun?
And we both pretty much hated the Springfield and the H&K. The FN is a plastic gun, so it's not about the plastic because we both loved that one. But the Springfield just had a cheap feel to it and even though the H&K did not have the cheap feel to it, it wasn't fun to shoot. For starts: WAAAAAY too much pre-travel on the triggers both of the H&K and of the Springfield. Those enormous trigger guards don't sit well with me, either. When not ready to shoot, I like my finger on the guard and that's tough to do when the guard is two inches long.
I'm glad I got to try them out. Now I know that I just don't like those two guns. And I also know that if I find myself a little flush, the amusing thing might be to obtain the FN 5.7.0 -
It works-[:D] Pop,pop, BVVVVVVVVVVVVVVVVVVVVVVVD
Price is steep for an air gun, but the fun factor is worth it.[:D]
http://air-ordnance.com/
http://www.youtube.com/watch?feature=player_embedded&v=UbOCyMEFhyo0 -
We went to a range called buffalo creek shooting range. It ws 25 bucks, and you could go toany of the ranges.We went to the rifle range to zero in out optics and then headed over to the pit. If you live in IL it is definatley worht the the drive. The colt handled all the ammo after the break in period, Some guy gave us 00buck and now im bruised. The only thing that came lose on the colt was my houge grip. I also left the binos at home so it was no fun trying to zero in the aimpoint wit a 3x burris. The pit was huge. They need to put some cars in there and a truck to the back left. While cleaning the AR's my friend lost the small pin that holds the firing pin in. What is it called and where can he get another one, we were thinking hardware store but we want the right part. 0 -
Well, I guess I should say 'back yard report'...
Took the AR's out today for some shootin' fun. The wife wanted to go along too. My buddy was bringing over his AR's, one of which is chambered in .204. Wife wanted to shoot that one in comparison to the .223. She wants one or the other for a coyote gun, but can't decide which (Yay...get to buy another gun!!).
Anyway did some shooting steel targets at 100yds, then further out. My buddy's got a DPMS HB 24" in .204 and another 24" HB in .223 with a brake, both scoped with some pretty nice glass. Wife shot pretty darn well with both, but the 24" HB's are just too heavy for her taste.
Then we decided to back up. The furthest we could get was 315 yards, so we decided to try from there. Lots of hits for my buddy and I, but wife unit was having a hard time getting a good cheek weld with the collapsable stocks. Plus we had a pretty stiff crosswind blowing by now.
My buddy hits a few in a row with his .204 and starts grinnin' (sorta like 'top that!'). Game on; so I grabbed my Bushy 16" M4/A3 with iron sights, clicked it up a couple clicks. He's sayin' "no way are you gonna make..." Just about then I was in position...<Bang>...<ding!> <Bang>...<ding!> <Bang>...<ding> <Bang>...<ding> <Bang>...<ding!>; "Your turn!" says me, with a big fat grin. [:D]
He hit a couple, then we went back to shooting the other guns. All in all I hit the steel 16 times out of 20 with my iron sighted M4/A3. I thought that was pretty good, considering the wind and downhill terrain.
Then we walked back and broke out the pistols. Wife recently passed her CCW so she wanted to get some training/practice in (wants a CCW pistol also...YAY, get to buy another gun!). She had never shot a centerfire pistol before, let alone a 1911. Well, holy crap, this girl can shoot!! She even did the 'Hot brass dance' when she took one down the brazier. [:D] She did great thought, and we all had a blast!
Nothing like the smell of burnt gunpowder in the afternoon breeze!
[^]0 -
Finally got some Hornady 44 mag leverevolution Henry Big boy loves them about 3" high at 100 yds compared to remington corelokts nice group for open sights and old eyes my model 29 grouped real good too the colt anconda didn't like them ran out before I could try them in the ruger carbine. forgot to bring camera this time hopefully get pictures of targets next time 0 -
Got to finally get some range time in and scrounged up enough .357SIG to try my Glock G32 out. All I can say to the Glock haters is you're missing out on FUN! I'd never shot that caliber before. I was expecting bad recoil...farthest thing from it. Very accurate(for me). No jams or failures of any kind with it. Definately have enough confidence to carry it. I do need to get a Lone Wolf barrel in .40 though as that ammo is cheaper and easier to get but that .357SIG is a winner of a caliber. Ammo was Hornady Critical Defense. I did experience my first factory centerfire dud. I had 1 round of .380 Hornady that would not light off. I have hundreds of rounds through the LCP with no failures til this one. Definately gets in your head that this could happen at the worst time so it pays to practice a drill where you get a dud. The .44 Special Bisley is lots of fun and thinking I may use it for deer hunting. The .22 is fun as always..and Cabelas actually had a ton of CCI Mini Mags in stock. 
.357SIG target
0 -
Okay, so I finally got to the range with some stuff other than just my carry weapon. My dad has been up for the week for a visit. We had hoped to get out to the outdoor range, but the weather was not cooperating. We ended up going to the indoor range instead. We had to justify him packing all those weapons in his truck for the trip after all. [:)]
First up: Glock 23 (with a twist): I took my Storm Lake, drop in, 357 Sig barrel for my Glock 23 (40 S&W) and put about 100 rounds through it. Some might ask "Why". Well, because I can.
Only complaint: You can't interchange the G23 magazines with the 357 Sig ammo and get the mags loaded to full capacity. The follower is different. 10 round G23 (40 S&W) magazines become 8 round 357 Sig mags and 13 round G23 mags become 10 round 357 Sig. I will have to buy some G32 mags so I can get 13+1 357 Sig rounds into that G23 frame.
Recoil, using "range ammo" was similar to my 40 S&W ammo. The indoor range only has 25 yard capacity. Out to 25 yards my groups with ball ammo 40 and 357 were very similar, except for the size of the hole in the paper terrorist I was shooting.
Other than the drop in barrel, I used the factory plastic guide rod and spring for about 50 rounds and then swapped it for my stainless guide rod and 13lb spring. No difference in function or felt recoil.
If you plan on doing this, check the Glock forums and the serial number of your G23. Some of the older frames are not recommended to change over to 357 Sig. If you have a Gen 3 or Gen 4 you for sure can. IIRC correctly Gen 1 and some Gen 2's are not recommended for conversion.
Next up, the Dan Wesson 15-2 357 Mag revolver I got from Locust Fork. I test fired it with 38 Special as soon as I got it, but 357 Magnum rounds are hard to come by. I finally got some last week, so it was nice to put some down range.
This weapon has the big wood grip on it, a nice fit for my paws. After I fired the first round, I was not sure if I had bought a 357 magnum or a flame thrower! The 357 sig rounds had a nice little fireball out the barrel of my G23, but it was nothing compared to that 357 Magnum!
I was surprised that I could keep a group of shots inside the torso with the 2.5" barrel on the DW 15 with magnum rounds. I recently acquired the tool kit and a 6" barrel and shroud for that little baby. At 25 yards I was putting some nice tight groups in the head and heart area when firing single action. Double action trigger is not unmanageable, but single action is sweet for keeping a tight group. Very impressive pistol. I now need to get some more barrel assembly's for that thing.
Next up: Savage Model 24 O/U 22LR and 410 combo. This one I also got from Kasey. My first O/U combo gun. My dad had one like this when he was a kid. When I let him handle that rifle, you could almost see his trip down memory lane while he looked it over. He told me that was the rifle he preferred when his mom would send him and his brother out after squirrels and rabbits.
So, I started out with just one 22 LR round chambered. Pulled the trigger and got nothing. Second strike got ignition and lift off. That was the only malfunction, and I attribute it to the cheap 22 ammo I was using. Next, 410 2.5" target rounds. No problem, and my terrorist was now peppered with tiny little holes from head to groin at a range of about 15 yards.
I varied my 410 ammo from 2.5" to 3" as well as 000 buck and rifled slugs. It took them all flawlessly. That old rifle performed great and still locks up tight.
Dad and I traded around our weapons and blew the heck out of some paper terrorists for a couple of hours. It was a good day.0 -
Took my Rem 700 270 and 308 out
of moth balls to see if my jitters
have settled down any.
At a 100 yds the targets
looked like they were hit
with a ten inch pattern of
buck shot.wobble ,wobble0 -
I went out to shoot my 1896 Swedish Mauser 6.5x55 today. Making a long story short. Results are: 140 gr. Core Lokt Remington; 4+" group at 85 yds. (odd range, I know). 120gr. Nosler Balistic Tip Handload; 1.5" group, same distance. Conclusion: Remington Factory fodder sucks in my rifle. I shot two groups of 3 from the Remington box 1ST, then shot one group of 3 shots of the Nosler. If anything, the Remington had the advantage of a cleaner barrel, and a cooler barrel. Purpose of this exercise was to decide whether or not to continue on with a sporterizing project of an old stock for this gun. The project will go on, that group is promising, and good enough if it doesnt get any better than that.
SSgt Ryan E. Roberts, USMC0 -
I bought a new Kimber Pro Carry 2 on sunday, today I went to the indoor range and put 100 rnds down range, not alot I know but it was all I had time for. Anyway the first 21 rds went center mass at 5 yards, the next 21 went CM at 7 yards then to 15 where they were a bit more spread out but all in the chest cavity area, the rest of that box were also good hits. Changed targets and brought it back to 7 and put 3mags into the head, ran it out to 25 yrds and peppered the body of the target pretty well, I did miss 6 times or at least the shots were un-accounted for. pretty good for a new gun. I think I will hold onto this one for a long while. 0 -
Took a couple of guns out to the range today. (Public range - unsupervised)
Placed the new Burris AR-536 on my DPMS .308 Fired one shot @ 50 yards, adjusted once and put 4 in the black you could cover with a quarter. Moved target out to 100 and shot about a 3" 5 shot group in about 5 seconds. I like it.
I had put a new scope on my savage 22 mag and wanted to test 6 different types of ammo. Federal game-shock won with 4 in a cloverleaf and one 1/2" high of the group. Hornady 30gr v-max were close 2nd followed by CCI HP, Winchester, Remington, then Armscor.
Next was a new gun/scope. Savage 16 in 6.5 Creedmoor with a Burris E1 6.5-20X50. Sweet shooting gun. About as flat as a 270, recoils like a 243. Had it dialed in after 5 rounds and grouped well for me. I like this combination for a cutover/powerline gun. There will be blood!
Lastly I put a hundred rounds downrange from my new PSA closeout FNS40 with night sights. Gun felt well in my hand especially after switching out the backstrap. Shooting a little low and right out of the box but grouping real well. Zero FTF/FTE.
All-in-all a very enjoyable day. Met some nice folks there too.
p.s. Picked up 4-500 pieces of once fired brass above what I shot!0 -
I received my Mosin Nagant
and took it to the
field, My friend and hid boy loved
it.I shot nice and accurate once
we got used to the "take up"
in the trigger.Shooting this relic
is quite a bit of fun.I"m used to
bull barrels with strong scopes but
I tell ya, I'm looking forward to the
next outing and also looking for another
military rifle.I"m gonna buy another,they're
inexpensive and I'll lose mine,I'm sure as soon
as my grandson shoots it.
Question:I shot non-corrosive ammo.
Just how difficult is it and what do you use
and how thorough are you cleaning your rifle
after using corrosive ammo?
Thank-rong0 -
Went top the range this morning with Roger Ruger and the Trapdoor twins.
Since I was a kid, going to the movies every Saturday morning and watching Western movies, I always wanted to own a six shooter like the cowboys. While I was on the police department, we carried S&W 38's, but somehow it just wasn't the same, LOL.
Now that a shooting iron by Ruger in 45 Long Colt has joined my collection, I feel just like Tom Mix. (I'll wait while you youngins go and ask your parents who Tom Mix was, haha.) Anyway with my western holster slung low on my hip, I was having fun.
Then it was time to try out the Trapdoor twins. I have two Springfield Trapdoor rifles both made in 1884, in 45/70 caliber. This was their first time at the range for me and both performed very well. We have discussed this before, but it is a real feeling of history to fire these weapons. It is a strange feeling to shoot a single shot rifle after firing an M1 Garand so often.
The 45.70 round is a powerful cartridge and watching plastic soda bottles fly high into the air after getting hit is a rush. (doesn't take much to excite me )
One of the rifles had a small problem in that the extractor is weak and I had to extract spent casings by hand. It wasn't extracting them fast enough to hit the ejector. I guess it's time to try and find a new spring for a 120 year old rifle. If'n anybody has one, shout out, OK?
All in all, it was a fun morning, and now I have three guns to clean, so I'll sign off and get to work..........
__________________
njretcop@copmail.com

Charlie0 -
went to the range today and took only three guns along,, the new little Beretta with the long barrel, never a malfunction, the sights leave a lot to be desired, but managed to keep the shots in a 6 inch circle at 20 yds.
The Smith 686, 2 1/2 inch .357, lotta bang, sorta accurate for that kind of gun,, nothing to brag about
The Smith K.22 masterpiece, model 17 shoots as pictured below,, 20 yds one hand, standing, Ifn I wasnt so old and shakey, I probably could hit the target.[:0]
0 -
I took the CZ, newly aquired Taurus, and the newly aquired Marlin to the range today. I had my father-in-law tag along as a spotter.
Went to the pistol side first. The 40caliber CZ never ceases to impress me. A total pleasure to shoot. You can shoot it all day long with hot reloads and not feel it. Groups real nice off a rest. 2" @ 10yds, I'm sure with more practice I could dial it in better. I have made the conclusion that Alliant Bullseye powder is way to dirty. I put 100rds out today and it looked as though I shot 500. I have always thought that CZ's ergonomics are wonderful, but after looking at a Ruger P94 the other day with it's Hogue grips, I'd have to put the CZ second. The balance of the CZ makes for very quick follow-up shots, very easy to keep on target. I have to comment on the ease of cleaning in the CZ, hold the slide back and pop out the take-down pin, pull the slide off and your in buisness. Over 1500rds though it and not a FTF or FTE, with no misfires. Firing pin hits dead-center every time.
I'm very pleased with the Taurus Millenium Pro 9mm. I just picked it up less than a week ago. Also delightful to shoot. Not as accurate as the CZ, but much more accurate than the Keltec P3AT that this is replacing as a carry gun. I picked a box of CCI Blazer 115gr FMJ and 3 boxes of Remington 115gr MC. All functioned flawlessly, I wasn't overly impressed with the CCI's aluminum case, especially since it is a factor in producing cheaper ammo. However, the Remington green box at $6.50/box is over a dollar cheaper than the CCI. I thought the green box was also cleaner. Gun felt real nice in my hand. My father-in-law is over 350lbs and has big meaty hands, he also commented on the feel. The gun was balanced well and recoil was quite manageable, makeing in quick follow up shots. I have noticed that empty cases are not tossed the 20ft distance that the CZ puts em out. Instead they are tossed almost straight up. The CCI Blazers only popped cases about 6" out of the gun. About 2 feet with the Remington's. A few landed on my head.
The biggest suprise of the day was the Marlin 917VR that I purchased about 2weeks ago. It's their "new" addition to their 17HMR lineup. Blue heavy barrel on synthetic with their T900 trigger system. I wasn't in the mood to drop a couple hundred dollars on a scope so I ordered a Barska Huntmaster Pro 3-12x50 illuminated reticle scope to top it with, just to get a feel for their quality. I was very impressed with their intial quality and workmanship, for $40 I was a little anxious to find out how it would be. It is a very solid and well-made scope. It's multi-coated optics make for a crystal clear sight picture and it sports 12 brightness settings for the illuminated reticle. For the money, I really don't think you can beat this scope.
I took the scope and rifle in grabbed a set of Burris rings and had the scope mounted and bore-sighted. A real beauty with the scope mounted. After we finished with the pistols and cleaned em up, we drove down to the 100yds rifle range. Set up our rifle rest, targets, and rifle and got to work. We brought along Winchester Supreme, Federal, and CCI ammunition. The Winchester's sported polymer tipped V-Max bullets and the others had Speer TNT bullets, all in 17gr. The first 5rds scored in the 10ring at 4 o'clock. Immediately I could tell I really liked this gun. Just enough oomph to let you know that you were shooting something. A high-pitched "crack" told you this was no 22. From checking out the first set of rounds, I was very impressed with the consistancy of the groups and I knew this was a sweet little rifle. A few adjustments brought them to about the 3 ring at 9 o'clock, little too much I guess. A couple adjustments and 5rds later, we were cutting bullseyes.
This is the best group we had. The day was beautiful, ~80degrees, sun at our backs, just a few clouds in the sky and a soft 5mph breeze at all times. I shot this group around noon today, 5rds covered by a nickel. I haven't measured it yet. Needless to say, I am very impressed.
5 rounds at 100yds.
We then took it down to the 225yd range and set up some prarie dog shoot-n-c targets. I don't have a spotting scope so we decided to just throw some rounds out and see if we hit anything. We were a little low on our elevation as each round hit the bottom 1/4 of the P-dog. The rounds were still really close. If I had more time to run back and forth down the range we could have tried to get some tight groups, but I wasn't holding my breath. I think I'll stick the the 100yd range from here. At least for a while. We did meet a good-ol-boy who had built a Ruger M77 in 22-250, topped with a Baush and Lomb 6-24 scope and a super light trigger, you don't pull it, you just touch it. A real nice gun, he had us put some rounds through it, and I can tell you, I know what rifle I want next!
All in all it was a great day, beautiful, plenty of people out, shooting everything from 22s to 30-06's and more.
0 -
Here is my sight in target for my Remington M700 5R Mil-spec barrel in 7.62x51. I started at 25yds. and moved it out to 100yd once I had the zero close. All shots taken with Winchester 150 grain power point. I will be switching to a 168gr. bthp as soon as I get my reload supplies. I also included a picture of the rifle. 

0 -
Just returned from the range, shot the Glock 17, The Smith and wesson 10mm, and the Taurus Millinium Pro 9 mm
Glock was right on, needed a little right sight adjustment then it was right on the money.
The Smith 10mm not too bad, kept em in the black, nice feel to this one
The Taurus, leaves a little to be desired for accuracy, but again not a bad feeling pistol..
Either one of the three , I wouldnt hesitate to use..0 -
Buddy and I made it to the range today and shot for a short while. P238 performed flawlessly, just as I expected it to. Very nice shooting. Wish the trigger was a little lighter, but I guess I can live with it. After all, it's not a target pistol. LOL. 0 -
[img 
img]
[img][/img]
I had a job today that was close to the range. So I put my two 91/03's in the work van, then hit the range after I did the job.
When I got these rifles they would hit high and to the left. I had to aim low off the paper and to the right off the paper. Just to hit the target. So I did some reading up then some tuning up. And here is how it turned out. There is a couple of things I can do more (which i will) to tighten the groups up. But from not hitting the paper, to this I am very happy so far. Oh yea 50yrds with cheap surplus ammo and 20 shots each.0 -
Went to the range today to sight in the Thompson Center Ventura in today for the price these are good rifles the action is as slick as my Tikka I got this rifle for less then 350. 00 couldn't be more pleased
got it from from casey a few months back and put a Vortex scope on it
0 -
Took a couple I hadnt fired yet and was suprised how good they operate..I took the 9 mm largo 1921 spanish police pistol the Astra, and been so long since I shot the hopped up 9mm , I forgot just how hot is was.. Extremely accurate.. It will also shoot the .38 auto but I dont have any .38 auto ammo.,. 
The 1910/22 FN (browning patent) .32 auto was owned by a Nazi Soldier,was excellant in its performance. Not much bang but accurate..
Didnt take Beth long to zero in with the 1911A1, after almost a year of not shooting.. A good couple hours spent..[:D][:D]0 -
on a lighter report if anybody gives a ---- [8D]
Nobody shot themselves or anybody else today .[:D]
was a little crowded a lot of new shooters.[:)]
no jams no duds wasted about 500 rounds (300 22s)[;)]
new AK worked, AR,DE50 AND ,DE44 all good EVEN THE REM 522 [:p][:p]
NOW I GET TO CLEAN THEM UP[^][:(][^]0 -
Ok, got to shoot on Sunday (finally). Took the new Glock for a spin. I like it.... a lot.
First time I shot it, I hit a pop can at 25 yrds. Made me quite happy. Was holding 6-8 in groups at 25 yrds thereafter. Not impressive by any stretch but this was the first time I'd been out with it.
Had fun with the 16 ga too. Shooting pistols is second only to shooting clays as far as enjoyable shooting goes. Clays make great 25yrd pistol targets too (why hadn't I thought of that before?)
Totally forgot how much the plastic buttplate of my 30.06 hurts when I don't hold it tight to the shoulder, and with only a t-shirt to pad it. Let that happen on the first shot and was done after 4 (was there to shoot my new pistol anyway). Needless to say I was wholly unimpressed with my shooting with it yesterday anyway. That 4 shot group was at least 5 inches at 100yrds and left of center by about a hand breadth as well. It could possibly be the ammo as I was shooting, as it was some Sellier FMJ that I hadn't ever shot before, but I doubt it.
Had the 10/22 out too. Got a new 25 rnd mag for it, which failed to feed properly for the first 20 rnds. Was about to return it, when I decided to give it another go. Thereafter, it fed as well as the standard mag (I always seems to give me at least one FTE per 10.. probably need to oil the action a bit... it's still being broke-in). I need to put a real scope on the 22. The eye relief is terrible but it does work, I guess. Of note, drilled a clay with the 22 right thru the center, and didn't break the clay.
Also tried out some bird shot in the 22. At ten yards it does put holes in an old plastic oil bottle. But only scratches the label on a beer bottle. Doesn't cycle the action. It will likely put your eye out, but not much more.
Incidentally... Shoot-n-see made a believer out of me. Had mediocre experience with it in the past. Did they improve it recently?0
Please sign in to leave a comment.
Comments
62 comments