Whats it worth?
A NIB unfired hastings paradox fully rifled slug barrel with two scope bases attached. the barrel is for a remington 1100 w/ 2 3/4 in. chamber...so whats it worth? thanks[8D]
0
-
Stevens model 11 Jr. It's all original shape, and its really not too bad, im posting this for my dad. he says its about fair - good shape. I didnt see any listed. 0 -
Hi to all.
im new here an looking for a little help. i have older savage/stevens double barrel 16 ga. and im wondering what it might be worth. the only problem is that right now i dont have the gun with me so i dont know what modle # or serial# is.
i'm just looking for a ball park. the gun is in working order and is very clean.0 -
I have a M-11 (9mm) and M-12 (380) prebans.....I guess they are the last prebans.
Anyway:Yesterday I stopped in my regular gunshop, and I saw an old MACIt says:INGRAM M10A1. 9MM.45ACP.Military Armament CorporationStephenville, TXI believe that serial # starts with 26- or S6-The gun is in 9mm and has 2 metal parkerized 32 round mags. It is a very heavy and wide model. It looks like the mag well has the adapter for the 9mm mags. The front pin has some sort of wire in it.....I guess to keep it from falling out. The insertion end of that pin shows a good amount of use. The cocking nob is the tall style with the sight groove in it and the tab to keep it from spinning. The barrel is heavier than my M-11 and it has the front strap bracket on it. On the inside, the barrel has some heavy supports/chamber. The barrel isn't machined as smoothly as my M-11's. The hammer is made a numerous plates stacked together, instead of one piece hammer in my M-11. The safety lever was in front of the trigger guard instead of on the side of the reciever. The mag release is made of metal.The welds on the back plate do not look as heavy as the M-11 welds. The back plate also has 3 holes near the top. One is top center....sight hole. The other 2 sit a little bit lower and are alligned left and right. The left hole has been drilled bigger by someone.....I guess to make the clasp for a sling fit. I am sure I could drill the right hole out to the same diameter so the appearence would match. It looks like the gun has a lot of use. I can still see a rifling in the barrel. Condition is probably an NRA Good.I guess that the welds could be redone if necessary and I could have it refinished.It looks like a cool MAC.....Heavy/FAT/shaped like my M12.What is this baby worth? What should I pay? Should I buy it?ThanksChris0 -
Stevens Junior Model 11
Do we need to add it to insurance? Whats it worth?0 -
Factory Custom Bushmaster AR15 target rifle with free-floated,
fluted and accurized Blackstar Barrel with custom break,
flat top JP gas block, removable front sight assembly and
rear carry handle, and superb trigger tuned to 3.5 lbs. the rear sight has wired cross hairs instead of just a peep hole. It is near new (less than 500 rounds comes in the original case with papers etc.0 -
there is a benifit for my uncle soon, and my sister's dad donated a gun. i would like to know what its worth. Its a baikal IZH-94 22 lr/20 gauge over under. it has wood stocks, blued finish, dual gold triggers, and comes with a camo gun sock. it is brand new....any idea?
Thanks0 -
I have a 1992 Camaro Z-28. Loaded with all the bells and whistles. Only has 25,000 miles. 350 auto with posi. Black with red strips and gray int.
It has been sitting under a car cover for a few years and needs a good detailing. There is one small dent in the passanger door. The tires are wore out (thanks to Toolbabes lead foot). It has not been driven in 3 years. Toolbabe thinks I should sell it and build myself a Hotrod. I love to work on cars and trucks. Modifying them. This Camaro is a Collectors item and I dont want to change it in any way. Several of my Stepbrats want it. Very bad. But they would wreck it[:0][xx(].
I dont have a clue what it is worth. I did turn down 15,000 5 years ago.
TOOLS
General TOOLS RRG
Don't go blaming the beer. Hank Hill
So much Ice, So much Beer. So little time. Shooter4
I don't have an anger problem. I have an idiot problem. Hank Hill
When I was a child, I thought as a child. But now that I am grown, I just wish I could act like a child and get away with it.0 -
this is an olympic arms PCR-1 with a 16 inch bull barrel retractable stock,... pad sling aimpoint scope and lazer
should I sell it together or part it out I also have the uncle mikes case 3 30 rd mags and 5 20's
I can't seem to find any comparables on the sight0 -
air/hydrolic lift. 3 phase 200psi comp. complete with the valves and resivoir and 4ft x 4ft plate in the floor. dont know the capacity on the ram, would guess 1ton......it works. ballpark ideas? 0 -
made in 1957 he wants 100 dollars for it.
.22 short, i thought that they couldnt cycle autos though?0 -
If it's genuine!
Reel to reel
35 mm Black and White film entitled: AERIAL NAVIGATION - RADIO AIDS 1941
RESTRICTED TRAINING FILM ca. 1930 - ca. 1945
created by - The Department of Defense, Department of the Army, office of the Chief Signal Officer
Someone has it for sale.
Thanks0 -
That is a good price for that gun....IF it is in good shape. Check out the mag pretty good. We sell them pretty easily for $199 in the store. 0 -
thanks LF, i knew i liked you for some reason 0 -
quote:Originally posted by SuburbanNoize
thanks LF, i knew i liked you for some reason
You'll learn why around age 14-15.
[:o)]0 -
quote:Originally posted by SuburbanNoize
.22 short, i thought that they couldnt cycle autos though?
I had one. It takes .22 High Velocity Shorts to cycle. [I never actually tried any others]0 -
Henry was it fun to shoot? 0 -
I have had a few pre safetys.. they are nice little guns, and for 1 bill I would snatch it up..imo,,nambu 0 -
...Is that the same as a "Minx" before the thumb safety? If so, I had a Minx for a long time and it never, ever failed in any way. No extractor = less parts to break. For a C note, I'd jump on it. 0
Please sign in to leave a comment.
Comments
19 comments