Skip to main content
Help Center Community Shop

What's a good chainsaw.

Comments

59 comments

  • HandLoad
    If you're gonna keep float testing them, maybe a Homelite is best!!

    I have a neighbor who HAS to have the Best of everything - a little while back, when we had a storm, everybody in our small Neighborhood turned out to clear the road - the neighbor brought his Stihl, complete with the cute case, and his gloves and visor, and I brought my little Homelite - guess who cut up almost all the deadfall on our road? Me - my chain was sharp, and I could start and run my saw...the neighbor couldn't keep his running, and when it did, the chain was dull.
    0
  • HandLoad
    I bought mine as a "Refurb" for $79.00, from one of those cheap catalogs, and six seasons later, it is still going...

    @ $79 per, you could afford three or four "float/drop tests" before you would have spent as much as for a Stihl or Poulan or Husquvarna, and you would have gotten four sharp chains, to boot!
    0
  • GuvamintCheese
    quote:Originally posted by Jacob2008
    husqvarna
    stihl
    husky

    all three i have witnessed, and loved how they acted
    Thats only 2.
    0
  • GuvamintCheese
    quote:Originally posted by RUGERGUNZ
    Husqvarna 346XP

    Fastest turning stock saw (at least when I bought mine), high power for low weight. Excellent saw.

    derer.jpg
    Do you use that one?[:D]
    0
  • dcon12
    quote:Originally posted by cartod
    quote:Originally posted by Jacob2008
    husqvarna
    stihl
    husky

    all three i have witnessed, and loved how they acted
    Thats only 2.


    Give him a break, school just started. Don
    0
  • Jacob2008
    quote:Originally posted by cartod
    quote:Originally posted by Jacob2008
    husqvarna
    stihl
    husky

    all three i have witnessed, and loved how they acted
    Thats only 2.


    Around here its 3
    0
  • ChetStafford
    STIHL and forget it they are not as high preformance as a Husqvarna but they are great saws

    I have an 039 that I have been cutting with for ten years and it is still going strong I have probably cut 175-200 ricks of fire wood with it and tons of brush (general clean up)

    You will not regret a STIHL one bit
    0
  • LesWVa
    Husqvarna

    Stihl made a great saw before they went to the three digit model numbers. Take the AV29 was a killer saw. The 290 sucks.
    0
  • RUGERGUNZ
    quote:Originally posted by cartod
    quote:Originally posted by RUGERGUNZ
    Husqvarna 346XP

    Fastest turning stock saw (at least when I bought mine), high power for low weight. Excellent saw.

    derer.jpg
    Do you use that one?[:D]



    Yeah, it gets used. That was a baby pic of it, brand new right out of the box.

    Changed bars three times, been through dozens of chains and built a stainless custom set of dogs for it modelled after the 254XP that grip better.
    0
  • WinM70
    I like my Husqvarna, wife likes it also and has claimed it as "her saw" if she gets ride of me she's keeping that saw so she says.
    0
  • andersk
    I've been using a Stihl for about 6 years ... it is OK, but not as reliable as my old - too old - Maculloch 2-10 automatic.

    I think it is worthi it to get one with a compression release ... the recoil parts on the Stihl are a bit fragile.
    0
  • David Nunn
    There is a Stihl in my garage that has quit running. The Stihl I had before that one quit running.

    The Echo that I bought before I bought either of the two Stihls still runs.

    IMNSHO, if you are going to step up from a Poulan or Homelite discount-store POJ, you should step over the Stihl and step up to the Echo.
    0
  • Boomerang
    quote:Originally posted by nunn
    There is a Stihl in my garage that has quit running. The Stihl I had before that one quit running.

    The Echo that I bought before I bought either of the two Stihls still runs.

    IMNSHO, if you are going to step up from a Poulan or Homelite discount-store POJ, you should step over the Stihl and step up to the Echo.
    David - Send them to me. Stihl's should never be somewhere they are not appreciated. What model numbers do you have?
    0
  • Cubslover
    Either someone is on a poofin rampage, or someone is deleting their posts.
    0
  • iluvguns
    Must be POOFS! Oh well...[:D]
    0
  • phideaux4886
    Stihl
    0
  • David Nunn
    quote:Either someone is on a poofin rampage, or someone is deleting their posts.

    What a topic to get pissy over! Chainsaws! For crying out loud!

    Jacob, I think it's past bedtime.
    0
  • Cubslover
    quote:Originally posted by nunn
    quote:Either someone is on a poofin rampage, or someone is deleting their posts.

    What a topic to get pissy over! Chainsaws! For crying out loud!


    I'm with ya on this one.
    0
  • Jacob2008
    quote:Originally posted by nunn
    quote:Either someone is on a poofin rampage, or someone is deleting their posts.

    What a topic to get pissy over! Chainsaws! For crying out loud!

    Jacob, I think it's past bedtime.


    got 4 hours left of me
    0
  • Alpine
    To answer someone question from a previous page: I don't know if Stihl has a parts department, as I have had mine for 30 years and never needed a part.
    Stihl
    0
  • Captplaid
    Go with a Deere.

    John Deere chainsaws float!
    0
  • SXSMAN
    quote:Originally posted by cartod
    quote:Originally posted by RUGERGUNZ
    Husqvarna 346XP

    Fastest turning stock saw (at least when I bought mine), high power for low weight. Excellent saw.

    derer.jpg
    Do you use that one?[:D]


    I'm replacing all my saws with the XP (Pro series) line of saws. My 350 will be replaced with the 346xp .

    That's a great saw [:)].
    0
  • SXSMAN
    Let's have a little look back shall we....http://forums.gunbroker.com/topic.asp?TOPIC_ID=507299

    Husqvarna is the answer.

    But what was the question ?

    Who makes good shotguns ?

    Who makes good sewing machines ?

    [:D]
    0
  • Mobuck
    Personally, I prefer Stihl but I've been using an Echo when working for another farmer. I'm impressed with the little Echo(340 or 430, I can't remember). It's light and after I tuned it a little, it starts first pull all day. Uses little fuel and according to my son, they have an excellent warranty(does not cover falling in the river). If I were buying a little saw to do some trimming and didn't want a throwaway discount store saw, I'd add Echo to my look at list.
    0
  • Navybat
    Buy a Stihl MS250...about $300, works and works and is light but powerful. Comes with 16" bar so it's good on an ATV...but you can change to an 18" bar if you want to (it's what I have).

    Good luck!
    0
  • 11BravoCrunchie
    Wow...

    CaptPlaid, why did you drag this post up from the depths of the 2007-era pages?

    CGR was lying to us from day one about everything because she was feeling guilt over the death of a friend, or something like that. I didn't actually understand the full story.

    I was under the impression that this thread had been resolved 4 years ago.
    0
  • Horse Plains Drifter
    I think he's having CGR withdrawls, because he dug up several old CGR threads![;)]
    0
  • GuvamintCheese
    Did'nt CGR turn out to be an UFG?
    0
  • Horse Plains Drifter
    quote:Originally posted by cartod
    Did'nt CGR turn out to be an UFG?
    Sumpin' like that, it's just all so confusing now![:0]
    0

Please sign in to leave a comment.

Recent Activity