Skip to main content
Help Center Community Shop

Range report

Comments

73 comments

  • Sig220_Ruger77
    I took the CZ, newly aquired Taurus, and the newly aquired Marlin to the range today. I had my father-in-law tag along as a spotter.

    Went to the pistol side first. The 40caliber CZ never ceases to impress me. A total pleasure to shoot. You can shoot it all day long with hot reloads and not feel it. Groups real nice off a rest. 2" @ 10yds, I'm sure with more practice I could dial it in better. I have made the conclusion that Alliant Bullseye powder is way to dirty. I put 100rds out today and it looked as though I shot 500. I have always thought that CZ's ergonomics are wonderful, but after looking at a Ruger P94 the other day with it's Hogue grips, I'd have to put the CZ second. The balance of the CZ makes for very quick follow-up shots, very easy to keep on target. I have to comment on the ease of cleaning in the CZ, hold the slide back and pop out the take-down pin, pull the slide off and your in buisness. Over 1500rds though it and not a FTF or FTE, with no misfires. Firing pin hits dead-center every time.

    I'm very pleased with the Taurus Millenium Pro 9mm. I just picked it up less than a week ago. Also delightful to shoot. Not as accurate as the CZ, but much more accurate than the Keltec P3AT that this is replacing as a carry gun. I picked a box of CCI Blazer 115gr FMJ and 3 boxes of Remington 115gr MC. All functioned flawlessly, I wasn't overly impressed with the CCI's aluminum case, especially since it is a factor in producing cheaper ammo. However, the Remington green box at $6.50/box is over a dollar cheaper than the CCI. I thought the green box was also cleaner. Gun felt real nice in my hand. My father-in-law is over 350lbs and has big meaty hands, he also commented on the feel. The gun was balanced well and recoil was quite manageable, makeing in quick follow up shots. I have noticed that empty cases are not tossed the 20ft distance that the CZ puts em out. Instead they are tossed almost straight up. The CCI Blazers only popped cases about 6" out of the gun. About 2 feet with the Remington's. A few landed on my head.

    The biggest suprise of the day was the Marlin 917VR that I purchased about 2weeks ago. It's their "new" addition to their 17HMR lineup. Blue heavy barrel on synthetic with their T900 trigger system. I wasn't in the mood to drop a couple hundred dollars on a scope so I ordered a Barska Huntmaster Pro 3-12x50 illuminated reticle scope to top it with, just to get a feel for their quality. I was very impressed with their intial quality and workmanship, for $40 I was a little anxious to find out how it would be. It is a very solid and well-made scope. It's multi-coated optics make for a crystal clear sight picture and it sports 12 brightness settings for the illuminated reticle. For the money, I really don't think you can beat this scope.

    I took the scope and rifle in grabbed a set of Burris rings and had the scope mounted and bore-sighted. A real beauty with the scope mounted. After we finished with the pistols and cleaned em up, we drove down to the 100yds rifle range. Set up our rifle rest, targets, and rifle and got to work. We brought along Winchester Supreme, Federal, and CCI ammunition. The Winchester's sported polymer tipped V-Max bullets and the others had Speer TNT bullets, all in 17gr. The first 5rds scored in the 10ring at 4 o'clock. Immediately I could tell I really liked this gun. Just enough oomph to let you know that you were shooting something. A high-pitched "crack" told you this was no 22. From checking out the first set of rounds, I was very impressed with the consistancy of the groups and I knew this was a sweet little rifle. A few adjustments brought them to about the 3 ring at 9 o'clock, little too much I guess. A couple adjustments and 5rds later, we were cutting bullseyes.

    This is the best group we had. The day was beautiful, ~80degrees, sun at our backs, just a few clouds in the sky and a soft 5mph breeze at all times. I shot this group around noon today, 5rds covered by a nickel. I haven't measured it yet. Needless to say, I am very impressed.

    5 rounds at 100yds.

    guns.jpg

    We then took it down to the 225yd range and set up some prarie dog shoot-n-c targets. I don't have a spotting scope so we decided to just throw some rounds out and see if we hit anything. We were a little low on our elevation as each round hit the bottom 1/4 of the P-dog. The rounds were still really close. If I had more time to run back and forth down the range we could have tried to get some tight groups, but I wasn't holding my breath. I think I'll stick the the 100yd range from here. At least for a while. We did meet a good-ol-boy who had built a Ruger M77 in 22-250, topped with a Baush and Lomb 6-24 scope and a super light trigger, you don't pull it, you just touch it. A real nice gun, he had us put some rounds through it, and I can tell you, I know what rifle I want next!

    All in all it was a great day, beautiful, plenty of people out, shooting everything from 22s to 30-06's and more.

    Marlin.jpg
    0
  • Sig220_Ruger77
    I bought an Inland M1 Carbine
    and it is fun to shoot.
    What is odd with this rifle is
    that I don't need a scope (tired eyes)
    to hit targets (which I am very pleased to say)
    Easy to reload, fun to shoot.
    I think I'm gonna get a Ruger mini-"something".
    Seems pretty close to the Carbine-looks wise.
    Any advice on which Ruger to get would be greatly
    appreciated.I'm not expecting much in the accuracy
    dept. I shoot steel out to 100 yds 12" plates.
    I have a RRA .223, I was kind of wondering about
    the mini 30.
    Thanks-Ron
    0
  • Sig220_Ruger77
    A friend of mine went on a buying spree and today was a good day for a hike so we headed out to our closest BLM site to hike and shoot.

    We brought nine fire-arms:
    S&W 686-6 revolver
    Ruger MKIII Hunter
    Springfield XD **
    FN 5.7 **
    Colt Commander 1911A1 *
    H&K (some .45ACP thing; I never did figure out the model)**
    Ruger Standard Model .22 pistol*
    Ruger 10-22 Carbine
    22-250 rifle that was somebody else's project gun...a total frankenstein.

    * My friend's gun
    ** My friend's NIB gun

    My guns all performed like they usually do except that the 10-22 was having some cycling/feeding issues. I've been messing with that one so it might be my fault.

    My friend's guns were more interesting because they were mostly new to us. We both really liked the Colt. We both really, really like the FN. It's got a nice little pop to it without too much kick, the trigger's decent and it is, in the end, just a damn fun gun. I'm not sure how practical it is, but then who needs a good reason to buy a fun gun?

    And we both pretty much hated the Springfield and the H&K. The FN is a plastic gun, so it's not about the plastic because we both loved that one. But the Springfield just had a cheap feel to it and even though the H&K did not have the cheap feel to it, it wasn't fun to shoot. For starts: WAAAAAY too much pre-travel on the triggers both of the H&K and of the Springfield. Those enormous trigger guards don't sit well with me, either. When not ready to shoot, I like my finger on the guard and that's tough to do when the guard is two inches long.

    I'm glad I got to try them out. Now I know that I just don't like those two guns. And I also know that if I find myself a little flush, the amusing thing might be to obtain the FN 5.7.
    0
  • Sig220_Ruger77
    Took my S-I-L to the range today. He is 30 and was in the Air Force.
    He loves his .40 glock, (Glock lucky for him)
    He promply loaded up 2 mags with his best 9mm rounds and fired 1 it would not eject. He cleared the jam and fired again it jambed. He turned to me and said this gun is f---ed up. By then I'd picked up the first jambed round and it looked like the liberty bell. Thats when I knew what he did. He said your not able to load 9mm in a 40 mag. Well you can and he did. Talk about stove piping a round through a target, I think he's lucky he hit it. Gun was not hurt (only his pride)
    0
  • Sig220_Ruger77
    Took the little 1908 Colt Pocket .380 to the range. What a Shooter!!!!!!!!!!!!!!!! 25 yds all rounds in a 10 inch circle.. Not precision but a gaurenteed hurt on anyone on the receiving end..[:0][:0]
    0
  • Sig220_Ruger77
    A while back I promised to give a range report on the .22-250 I purchased, so here it is. I can't wait to see what some of my reloads will do.
    Gun--Remington SPS Varmint .22-250(26" heavy bbl)
    Ammo--Remington UMC 45 Gr. JHP
    Range--100 yard
    target-1.jpg

    Jon
    0
  • Sig220_Ruger77
    Here is my sight in target for my Remington M700 5R Mil-spec barrel in 7.62x51. I started at 25yds. and moved it out to 100yd once I had the zero close. All shots taken with Winchester 150 grain power point. I will be switching to a 168gr. bthp as soon as I get my reload supplies. I also included a picture of the rifle.
    1216577337.jpg
    100_0605.jpg
    100_0607.jpg
    0
  • Sig220_Ruger77
    Went top the range this morning with Roger Ruger and the Trapdoor twins.

    Since I was a kid, going to the movies every Saturday morning and watching Western movies, I always wanted to own a six shooter like the cowboys. While I was on the police department, we carried S&W 38's, but somehow it just wasn't the same, LOL.

    Now that a shooting iron by Ruger in 45 Long Colt has joined my collection, I feel just like Tom Mix. (I'll wait while you youngins go and ask your parents who Tom Mix was, haha.) Anyway with my western holster slung low on my hip, I was having fun.

    Then it was time to try out the Trapdoor twins. I have two Springfield Trapdoor rifles both made in 1884, in 45/70 caliber. This was their first time at the range for me and both performed very well. We have discussed this before, but it is a real feeling of history to fire these weapons. It is a strange feeling to shoot a single shot rifle after firing an M1 Garand so often.

    The 45.70 round is a powerful cartridge and watching plastic soda bottles fly high into the air after getting hit is a rush. (doesn't take much to excite me )

    One of the rifles had a small problem in that the extractor is weak and I had to extract spent casings by hand. It wasn't extracting them fast enough to hit the ejector. I guess it's time to try and find a new spring for a 120 year old rifle. If'n anybody has one, shout out, OK?

    All in all, it was a fun morning, and now I have three guns to clean, so I'll sign off and get to work..........
    __________________



    njretcop@copmail.com

    vic.jpgdd.art
    Charlie
    0
  • Sig220_Ruger77
    This is the first day in several that we didn't have fog so, I was able to get the new, to me, rifle out today. Sine I slept longer than intended and was pressed for time, I decided to shoot off the hood of the Jeep.

    Note to self: Whether it's convenient or not, drag out the bench.

    I had a tough time issolating my heartbeat from the side of the hood, and it shows in my grouping. The final group, lower right, was the result of a folded blanket between my chest and the hood.

    target.jpg

    With a ton of practice I should be up to what this rifle is capable of.
    0
  • Sig220_Ruger77
    SKS worked well, shot 200 rounds of my wolf ammo...FUN...we were all safe none of us were hurt...(friend got burnt on barrel,his sks), I would never get my SKS barrel that hot. Bottels and targets didn't stand a chance...
    0
  • Sig220_Ruger77
    Well got the urge bad and had to hit the range. Had several Pistols
    I had never even fired.

    Targets were a 5" target with 5 per sheet. All shot a 7 yards.

    Para WartHog, Kick was not near as bad as I had been told. While its not a target Pistol I now have enough confidance in it to use it as my CCW pistol. No Jams and checking all Brass none from any pistol had any extra dents of dings in them. Also after about 100 rounds thru it my hands are just a little bit sore. But this also could be my hands are still healing from Carple Tunnel Surgery in Dec.

    S&W Sigma in a 40 Was actually surprised at how it shot most bullets stayed on the target. Trigger pull is not the greatest, but that could be the other pistols all had great triggers. This also would make a good CCW piece.

    Taurus 1911 SS While good the sights are very hard to see, Need to adjust the sights as all were left of the target. Trigger pull was ok but had a lot of slack to take up before you hit the real trigger. Almost like a 2 stage.

    Dan Wesson 15 357 used 38P+. Great trigger pull. After shooting the 45's the kick was almost like I was shooting a 22. Sights need a little work had a hard time picking up the rear sight. May need to get a New blade or repaint mine.

    Kimber Raptor Wow after shooting a couple of Mags at the target the X ring was gone. Have Houge grips and they really tame the recoil of this pistol. Fantastic trigger pull.
    0
  • Sig220_Ruger77
    Yesterday I had a great opportunity to go to a local indoor range. One high school friend (Rob), who's also an NRA-cert instructor, came down from Indiana, and another high school bud (Jim) and his wife came up from Tampa, FL. Fortunately I was able to arrange for my wife to join us, and the 5 of us got to shoot for a couple of hours.

    My Florida friend has rarely done any shooting, and his wife had never done it before, so I was glad my other friend was there as an instructor. He brought his S&W 1911, Kahr K9 (I think that was it), and his Ruger snubby .357. I brought my S&W 686+ (another .357) and my wife brought her Taurus Judge. If I'd had any foresight whatsoever, I would have thought to bring my grandfather-in-law's Ruger Mark II. That would have been a MUCH better gun for first-time shooters.

    Regardless, we still had fun, even though my friend's wife was a little timid because of the kick. She fired the Judge only once (the range doesn't allow shot to be fired, even from a Judge, so we had to use .45 Colt), and put it down. But my wife shot several rounds of it to get more familiar with her gun, and we did lots and lots of .38 Specials out of my 686 and my other friend's Ruger.

    We also did several .357s, which is just amazing the difference when you "warmed up" with .38's. Just the "in your faceness" of the flash and concussion. I tend not to feel it so much when I'm concentrating on my grip/sights, so it's an awesome feeling standing next to someone firing a .357 Magnum. [8D][:D]

    Shooting Rob's 1911 was a good time, too. Even though I'm a revolver guy, I still want a 1911. There's no arguing with the pure fantasticalness of that gun!!

    And since most of our targets were at 7 yards, I'm happy to report that every single paper bad guy out there is DEAD!![:p]
    0
  • Sig220_Ruger77
    Okay, so I finally got to the range with some stuff other than just my carry weapon. My dad has been up for the week for a visit. We had hoped to get out to the outdoor range, but the weather was not cooperating. We ended up going to the indoor range instead. We had to justify him packing all those weapons in his truck for the trip after all. [:)]

    First up: Glock 23 (with a twist): I took my Storm Lake, drop in, 357 Sig barrel for my Glock 23 (40 S&W) and put about 100 rounds through it. Some might ask "Why". Well, because I can.

    Only complaint: You can't interchange the G23 magazines with the 357 Sig ammo and get the mags loaded to full capacity. The follower is different. 10 round G23 (40 S&W) magazines become 8 round 357 Sig mags and 13 round G23 mags become 10 round 357 Sig. I will have to buy some G32 mags so I can get 13+1 357 Sig rounds into that G23 frame.

    Recoil, using "range ammo" was similar to my 40 S&W ammo. The indoor range only has 25 yard capacity. Out to 25 yards my groups with ball ammo 40 and 357 were very similar, except for the size of the hole in the paper terrorist I was shooting.

    Other than the drop in barrel, I used the factory plastic guide rod and spring for about 50 rounds and then swapped it for my stainless guide rod and 13lb spring. No difference in function or felt recoil.

    If you plan on doing this, check the Glock forums and the serial number of your G23. Some of the older frames are not recommended to change over to 357 Sig. If you have a Gen 3 or Gen 4 you for sure can. IIRC correctly Gen 1 and some Gen 2's are not recommended for conversion.

    Next up, the Dan Wesson 15-2 357 Mag revolver I got from Locust Fork. I test fired it with 38 Special as soon as I got it, but 357 Magnum rounds are hard to come by. I finally got some last week, so it was nice to put some down range.

    This weapon has the big wood grip on it, a nice fit for my paws. After I fired the first round, I was not sure if I had bought a 357 magnum or a flame thrower! The 357 sig rounds had a nice little fireball out the barrel of my G23, but it was nothing compared to that 357 Magnum!

    I was surprised that I could keep a group of shots inside the torso with the 2.5" barrel on the DW 15 with magnum rounds. I recently acquired the tool kit and a 6" barrel and shroud for that little baby. At 25 yards I was putting some nice tight groups in the head and heart area when firing single action. Double action trigger is not unmanageable, but single action is sweet for keeping a tight group. Very impressive pistol. I now need to get some more barrel assembly's for that thing.

    Next up: Savage Model 24 O/U 22LR and 410 combo. This one I also got from Kasey. My first O/U combo gun. My dad had one like this when he was a kid. When I let him handle that rifle, you could almost see his trip down memory lane while he looked it over. He told me that was the rifle he preferred when his mom would send him and his brother out after squirrels and rabbits.

    So, I started out with just one 22 LR round chambered. Pulled the trigger and got nothing. Second strike got ignition and lift off. That was the only malfunction, and I attribute it to the cheap 22 ammo I was using. Next, 410 2.5" target rounds. No problem, and my terrorist was now peppered with tiny little holes from head to groin at a range of about 15 yards.

    I varied my 410 ammo from 2.5" to 3" as well as 000 buck and rifled slugs. It took them all flawlessly. That old rifle performed great and still locks up tight.

    Dad and I traded around our weapons and blew the heck out of some paper terrorists for a couple of hours. It was a good day.
    0
  • Sig220_Ruger77
    I went to the local police range this morning to sight in my hunting rifle for deer season. I figured, "Since I'm going to the range, I might as well shoot my M1A, too...."

    Here's my first set of shots with my Remington 700, chambered in .270. Not the best shots, but since I don't take very long shots, and I killed two last year with two shots, I should be OK. I'm pleased with the one exact bullseye!

    l_714f9c33c894401e998cef27058a7420.jpg

    OK, on to "Jayne," my M1A....first I did 20 shots, adjusting my sights after every 5 shots. I didn't take a picture of this target because they were bad. However, here's 20 consecutive shots at 100 yards with open sights. The breeze was fairly gusty, too, so not too shabby, I think.

    l_70d680f3b4604d208790e922fd493f62.jpg
    0
  • Sig220_Ruger77
    Took my Rem 700 270 and 308 out
    of moth balls to see if my jitters
    have settled down any.
    At a 100 yds the targets
    looked like they were hit
    with a ten inch pattern of
    buck shot.wobble ,wobble
    0
  • Sig220_Ruger77
    Took a couple of guns out to the range today. (Public range - unsupervised)

    Placed the new Burris AR-536 on my DPMS .308 Fired one shot @ 50 yards, adjusted once and put 4 in the black you could cover with a quarter. Moved target out to 100 and shot about a 3" 5 shot group in about 5 seconds. I like it.

    I had put a new scope on my savage 22 mag and wanted to test 6 different types of ammo. Federal game-shock won with 4 in a cloverleaf and one 1/2" high of the group. Hornady 30gr v-max were close 2nd followed by CCI HP, Winchester, Remington, then Armscor.

    Next was a new gun/scope. Savage 16 in 6.5 Creedmoor with a Burris E1 6.5-20X50. Sweet shooting gun. About as flat as a 270, recoils like a 243. Had it dialed in after 5 rounds and grouped well for me. I like this combination for a cutover/powerline gun. There will be blood!

    Lastly I put a hundred rounds downrange from my new PSA closeout FNS40 with night sights. Gun felt well in my hand especially after switching out the backstrap. Shooting a little low and right out of the box but grouping real well. Zero FTF/FTE.

    All-in-all a very enjoyable day. Met some nice folks there too.

    p.s. Picked up 4-500 pieces of once fired brass above what I shot!
    0
  • Sig220_Ruger77
    My son and I went to the range yesterday. I gave him a Savage 30-06 from my gun cabinet as a high school graduation present. We lined it up to 150 grain rounds (I had used 180 grain) and he was shooting 1 1/2" groups at 100 yards, not bad considering the wind was gusting and irratic. I have put about 40 rounds through my Tikka 300 wsm and it has broke is fairly well it seems, I was shooting 1 1/4 inch groups and considering the wind I was very happy with that. We were using cheap (is there such a thing) ammo so like I said I was ahppy with the groups.

    We aslo shot my Ruger 454. It's a nice piece and I didn't realize my son had never shot it before. He had fun with the 454 loads and suprised me with his accuracy, but then he has had a good teacher.[:D] He then proceded to have a lot of fun shooting a 50 round box of 45lc through it. The range is an open public range, in the country, with lots of plinking targets available. We had it to ourselves most of the time we were there. So he practiced drawing and firing at various targets. And I have to say with a little practice he will most likely out shoot dad. But then dad could use a little more practice myself, I will not make it easy for him.

    We then took turn shooting a 22 mag rifle I brought along and we put about 120 rounds through that and called it a day.

    It was a good day.
    0
  • Sig220_Ruger77
    Well, I guess I should say 'back yard report'...

    Took the AR's out today for some shootin' fun. The wife wanted to go along too. My buddy was bringing over his AR's, one of which is chambered in .204. Wife wanted to shoot that one in comparison to the .223. She wants one or the other for a coyote gun, but can't decide which (Yay...get to buy another gun!!).

    Anyway did some shooting steel targets at 100yds, then further out. My buddy's got a DPMS HB 24" in .204 and another 24" HB in .223 with a brake, both scoped with some pretty nice glass. Wife shot pretty darn well with both, but the 24" HB's are just too heavy for her taste.

    Then we decided to back up. The furthest we could get was 315 yards, so we decided to try from there. Lots of hits for my buddy and I, but wife unit was having a hard time getting a good cheek weld with the collapsable stocks. Plus we had a pretty stiff crosswind blowing by now.

    My buddy hits a few in a row with his .204 and starts grinnin' (sorta like 'top that!'). Game on; so I grabbed my Bushy 16" M4/A3 with iron sights, clicked it up a couple clicks. He's sayin' "no way are you gonna make..." Just about then I was in position...<Bang>...<ding!> <Bang>...<ding!> <Bang>...<ding> <Bang>...<ding> <Bang>...<ding!>; "Your turn!" says me, with a big fat grin. [:D]

    He hit a couple, then we went back to shooting the other guns. All in all I hit the steel 16 times out of 20 with my iron sighted M4/A3. I thought that was pretty good, considering the wind and downhill terrain.

    Then we walked back and broke out the pistols. Wife recently passed her CCW so she wanted to get some training/practice in (wants a CCW pistol also...YAY, get to buy another gun!). She had never shot a centerfire pistol before, let alone a 1911. Well, holy crap, this girl can shoot!! She even did the 'Hot brass dance' when she took one down the brazier. [:D] She did great thought, and we all had a blast!

    Nothing like the smell of burnt gunpowder in the afternoon breeze!

    [^]
    0
  • Sig220_Ruger77
    Well, I went to the shooting range with my cousins. We got there, I opened my case, picked up my 44 magnum and the base pin latch nut fell off. It dropped right in front of me into the dirt. All three of us down on our hands and knees and we never found it. Oh well. My cousin had his S&W 629 in 44 mag as well as a carbine in 44 mag.

    Looks like I'll be ordering from Midway tomorrow.
    0
  • Sig220_Ruger77
    Just bought my 6 year old a Cricket rifle for her birthday. I must say the gun is very low quality and I'm not impressed a bit with the thing. I'd rate it about the quality of a raven or jennings. Had several issues with the bolt out on the range.
    0
  • Sig220_Ruger77
    It works-[:D] Pop,pop, BVVVVVVVVVVVVVVVVVVVVVVVD
    Price is steep for an air gun, but the fun factor is worth it.[:D]
    http://air-ordnance.com/

    http://www.youtube.com/watch?feature=player_embedded&v=UbOCyMEFhyo
    0
  • Sig220_Ruger77
    Got to finally get some range time in and scrounged up enough .357SIG to try my Glock G32 out. All I can say to the Glock haters is you're missing out on FUN! I'd never shot that caliber before. I was expecting bad recoil...farthest thing from it. Very accurate(for me). No jams or failures of any kind with it. Definately have enough confidence to carry it. I do need to get a Lone Wolf barrel in .40 though as that ammo is cheaper and easier to get but that .357SIG is a winner of a caliber. Ammo was Hornady Critical Defense. I did experience my first factory centerfire dud. I had 1 round of .380 Hornady that would not light off. I have hundreds of rounds through the LCP with no failures til this one. Definately gets in your head that this could happen at the worst time so it pays to practice a drill where you get a dud. The .44 Special Bisley is lots of fun and thinking I may use it for deer hunting. The .22 is fun as always..and Cabelas actually had a ton of CCI Mini Mags in stock.

    2013-11-10111911_zpsd87e92c3.jpg

    .357SIG target
    2013-11-10114215_zps2626a69e.jpg
    0
  • Sig220_Ruger77
    Finally took my DPMS AR out today and put about 200 rounds through it.I sighted it in so it was hitting about an inch low at 25 meters and with out any other adjustments to the sights, I was hitting propane cylinder gongs at 150 yards off hand. I say it performed well. A co worker of mine was there as well and I let him shoot it. He liked it better than his M-4 style AR. Definitely a good purchase.
    0
  • Sig220_Ruger77
    Browning Medalist circa '65.
    AWESOME!!!!!

    Goodbye Ruger 22/45!
    ron
    0
  • Sig220_Ruger77
    We went to a range called buffalo creek shooting range. It ws 25 bucks, and you could go toany of the ranges.We went to the rifle range to zero in out optics and then headed over to the pit. If you live in IL it is definatley worht the the drive. The colt handled all the ammo after the break in period, Some guy gave us 00buck and now im bruised. The only thing that came lose on the colt was my houge grip. I also left the binos at home so it was no fun trying to zero in the aimpoint wit a 3x burris. The pit was huge. They need to put some cars in there and a truck to the back left. While cleaning the AR's my friend lost the small pin that holds the firing pin in. What is it called and where can he get another one, we were thinking hardware store but we want the right part.
    0
  • Sig220_Ruger77
    I had three things I wanted to accomplish today, shooting related.
    one was to drift the sight on my Browning High Power.

    Before
    61013_zps93cf4d48.jpg
    The tools. I sought advice from ATE before I used any of these.
    6109_zps656d5a2c.jpg
    A little bit of marring.
    6108_zpse982cfe8.jpg
    Nothing a black Sharpie cant take care of.
    6107_zpsea8b28de.jpg
    The results. Fired from 15 yards with sand bags (13 shots) GTG for me.
    6103_zps8f6077b9.jpg

    The second item on my list was to mount my new American Defense AD Recon H throw lever mount. I received the mount today and rigged it up with a Leupold VXIII 1.5-5x20. The mounting is so easy that even I didn't have any hiccups. The mount is rock solid and looks good in my opinion. The quality is A+. I will report back at a later date with a repeat 0 test. I have no doubt that the Recon series has Larue looking over their shoulder.
    61010_zps5318cb02.jpg
    6106_zpsa469926d.jpg
    onelastone_zps4c07204b.jpg

    After I bore sighted the carbine I shot some 55 FMJ to get it on paper.

    The third thing on my list was to shoot 2 hand loads I had loaded yesterday,Sierra 52 grain HPBT MK and Midway DogTown 55 grain FBHP. Both loads show promise, but my 8 plus pound trigger does not make for bench rest tight groups. My RCBS trigger gauge only goes to 8 pounds. I had free float hand guards on my list to buy, but they are taking a back seat to a Geissele trigger.
    61012_zps6545e467.jpg
    6102_zps9cb902f3.jpg

    And a Group of PMC Noise Makers
    6101_zps7909f31b.jpg

    A cool hammer tool that has been in the family around 80-90 years.
    6105_zps224de893.jpg
    All put back together.
    6104_zps83553ffc.jpg
    0
  • Sig220_Ruger77
    went to the range today and took only three guns along,, the new little Beretta with the long barrel, never a malfunction, the sights leave a lot to be desired, but managed to keep the shots in a 6 inch circle at 20 yds.

    The Smith 686, 2 1/2 inch .357, lotta bang, sorta accurate for that kind of gun,, nothing to brag about

    The Smith K.22 masterpiece, model 17 shoots as pictured below,, 20 yds one hand, standing, Ifn I wasnt so old and shakey, I probably could hit the target.[:0]

    target.jpg
    0
  • Sig220_Ruger77
    Took a couple I hadnt fired yet and was suprised how good they operate..I took the 9 mm largo 1921 spanish police pistol the Astra, and been so long since I shot the hopped up 9mm , I forgot just how hot is was.. Extremely accurate.. It will also shoot the .38 auto but I dont have any .38 auto ammo.,.

    astra.jpg

    The 1910/22 FN (browning patent) .32 auto was owned by a Nazi Soldier,was excellant in its performance. Not much bang but accurate..

    Browning.jpg

    Didnt take Beth long to zero in with the 1911A1, after almost a year of not shooting.. A good couple hours spent..[:D][:D]
    0
  • Sig220_Ruger77
    Ruger GP-100

    At 50 feet i was able to keep all the shots on a paper plate. The trigger is very heavy but smooth. I was having problems with the .357's. It seemed like the ass end of the round, where the primer is, is too thick, and it woldnt let me close the cylinder, i didnt have this problem with the .38's, but i think itmay have been the cheap ammo, some kind of American Manufacturers ammo. Other than that i couldnt be happier with the gun, it shot about an 8 inch to 1 foot fireball out of the muzzle. And, as always, the glock functioned perfectly! [;)]
    0
  • Sig220_Ruger77
    on a lighter report if anybody gives a ---- [8D]

    Nobody shot themselves or anybody else today .[:D]
    was a little crowded a lot of new shooters.[:)]

    no jams no duds wasted about 500 rounds (300 22s)[;)]

    new AK worked, AR,DE50 AND ,DE44 all good EVEN THE REM 522 [:p][:p]

    NOW I GET TO CLEAN THEM UP[^][:(][^]
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?