Skip to main content
Help Center Community Shop

rcbs broken die

tomahawk
any of you ever had a die break? my resizing die , the piece that deprimes the case snapped off[V]
0

Comments

12 comments

Date Votes
  • CS8161
    You can replace the inner shaft, or just the depriming pin! You don't need a new die! What caliber resizing die is it? if you can't find one locally, my local store has a whole box of different caliber parts for the resizing die, I will pick you one up if you need it.
    0
  • Odawgp
    once with a 257 wby die. same thing broke it can be replace for a faction of the price of a new die.
    0
  • br549
    call RCBS they will send a replacement they have a life time warranty
    0
  • CHEVELLE427
    you dont even have to call rcbs just get the address on line and send it back with a letter and a new one or the part that broke will come right back ,i have sent 3 things back in the past 3 months, no ???? asked. [^][^]
    0
  • tomahawk
    really? i'll try that, thanks[:D] .243 depriming pin
    0
  • brier-49
    Just call RCBS, they will send you a replacement pin the same day. I had this happen with 30-06 dies and they sent 6 of them to me.
    0
  • SCorvers
    Roller bearing pin. If your local reloading supply house doesn't have'm, go to a bearing shop.
    0
  • whiteclouder
    Go buy a 5-pack at your gunshop. Reloading milsurp '06, I must have snapped 20 of them over the years.

    Clouder..
    0
  • jimdeere
    quote:Originally posted by brier-49
    Just call RCBS, they will send you a replacement pin the same day. I had this happen with 30-06 dies and they sent 6 of them to me.

    Brier's right. Bent the threaded rod on the decapper on a 35 yr. old sizing die. I called RCBS and got a new one in a couple of days. They don't require you send the old one back. What would they want with it?
    0
  • 1911a1-fan
    i once had a 9mm stuck upside down in a .40 stuck in a .45, my Dillon drove through each of them without breaking, it came down through the case feeder so i didn't catch it, i have had a few turn sideways and drove the decapping pin right through the side of the case
    0
  • tsr1965
    I keep a few decapping pins on hand. That is what will break if anything on a sizing die. RCBS will fix them for you, but the postage to get them there, will cost more than you buying one locally.

    If there are any other problems with your die, RCBS has great customer service.
    0
  • GUNFUNCO
    Never have been anything less that 100% satisfied with RCBS or Dillon products.

    Just call them-they will take care of it. If it needs to be sent back, they will tell you. If not you will have a new part within a few days.

    Unquestionably, they are the best in the business, bar none!
    0

Please sign in to leave a comment.

Recent Activity