Skip to main content
Help Center Community Shop

Saiga 308 rifle problem (no one knows)????

CS8161
I posted this over on ASK THE EXPERTS but so far have not had any responses:
I took my new, used Saiga 308 rifle out to the range, wanted to function test it to see how it worked...every two or three shots, the dust cover would pop off, fly back and hit me in the face! This can be very distracting in a combat situation! The dust cover appears to fit well and locks in place, but the recoil when firing must be enough to dislodge it and send it flying backwards! Anyone else have this happen with a Saiga rifle? Any ideas on a fix for this problem? I took the dust cover off and fired another 40 rounds with no problem.
0

Comments

6 comments

Date Votes
  • Sav99
    Is the dust cover properly seated in the semi circular groove at the front? Is it popping up from the front or sliding straight backwards? you have to tilt it up at the front when putting it back in then push down at the rear.
    0
  • Nighthawk
    I have one in 7.62X39 and havent had this problem or any as far as that goes. I would want a Gun Smith to have a look and make sure everything internal is in the correct working order. Good Luck!
    0
  • kimberkid
    Do you have a recoil buffer in it?

    If so, try taking it out and see if you still have the problem.
    0
  • CS8161
    Thanks for the info. The dust cover is fully seated and locked in place. I do not know if it has a recoil buffer, what do they look like?
    0
  • SuburbanNoize
    the recoild buffer on an ak is small little rectangular semi rubber piece with a arched hole in it. it keep the bolt from flying back and goin metal to metal.

    Yours may look simmilar
    0
  • CS8161
    No, my Saiga does not have a buffer. I am going to take the rifle back where I bought it and have the gunsmith take a look at it. Maybe the dust cover is not relieved enough for the latch to fully hold it in place.
    0

Please sign in to leave a comment.

Recent Activity