Skip to main content
Help Center Community Shop

Range report

Comments

62 comments

  • JWolf
    Ok, got to shoot on Sunday (finally). Took the new Glock for a spin. I like it.... a lot.

    First time I shot it, I hit a pop can at 25 yrds. Made me quite happy. Was holding 6-8 in groups at 25 yrds thereafter. Not impressive by any stretch but this was the first time I'd been out with it.

    Had fun with the 16 ga too. Shooting pistols is second only to shooting clays as far as enjoyable shooting goes. Clays make great 25yrd pistol targets too (why hadn't I thought of that before?)

    Totally forgot how much the plastic buttplate of my 30.06 hurts when I don't hold it tight to the shoulder, and with only a t-shirt to pad it. Let that happen on the first shot and was done after 4 (was there to shoot my new pistol anyway). Needless to say I was wholly unimpressed with my shooting with it yesterday anyway. That 4 shot group was at least 5 inches at 100yrds and left of center by about a hand breadth as well. It could possibly be the ammo as I was shooting, as it was some Sellier FMJ that I hadn't ever shot before, but I doubt it.

    Had the 10/22 out too. Got a new 25 rnd mag for it, which failed to feed properly for the first 20 rnds. Was about to return it, when I decided to give it another go. Thereafter, it fed as well as the standard mag (I always seems to give me at least one FTE per 10.. probably need to oil the action a bit... it's still being broke-in). I need to put a real scope on the 22. The eye relief is terrible but it does work, I guess. Of note, drilled a clay with the 22 right thru the center, and didn't break the clay.

    Also tried out some bird shot in the 22. At ten yards it does put holes in an old plastic oil bottle. But only scratches the label on a beer bottle. Doesn't cycle the action. It will likely put your eye out, but not much more.

    Incidentally... Shoot-n-see made a believer out of me. Had mediocre experience with it in the past. Did they improve it recently?
    0
  • JWolf
    Well, I went to the shooting range with my cousins. We got there, I opened my case, picked up my 44 magnum and the base pin latch nut fell off. It dropped right in front of me into the dirt. All three of us down on our hands and knees and we never found it. Oh well. My cousin had his S&W 629 in 44 mag as well as a carbine in 44 mag.

    Looks like I'll be ordering from Midway tomorrow.
    0
  • JWolf
    on a lighter report if anybody gives a ---- [8D]

    Nobody shot themselves or anybody else today .[:D]
    was a little crowded a lot of new shooters.[:)]

    no jams no duds wasted about 500 rounds (300 22s)[;)]

    new AK worked, AR,DE50 AND ,DE44 all good EVEN THE REM 522 [:p][:p]

    NOW I GET TO CLEAN THEM UP[^][:(][^]
    0
  • JWolf
    We went to a range called buffalo creek shooting range. It ws 25 bucks, and you could go toany of the ranges.We went to the rifle range to zero in out optics and then headed over to the pit. If you live in IL it is definatley worht the the drive. The colt handled all the ammo after the break in period, Some guy gave us 00buck and now im bruised. The only thing that came lose on the colt was my houge grip. I also left the binos at home so it was no fun trying to zero in the aimpoint wit a 3x burris. The pit was huge. They need to put some cars in there and a truck to the back left. While cleaning the AR's my friend lost the small pin that holds the firing pin in. What is it called and where can he get another one, we were thinking hardware store but we want the right part.
    0
  • JWolf
    Well this weekend my BOL & I went out to the Wenas shooting area to do some target shooting and I packed along my Taurus 850 for a little range work for it as well. The temp was in the low 30's & snow everywhere. The new ammo I wanted to try out was Buffalo Bore 158 grain .38 +p, they are a lead hollowpoint that supposedly go out at 1000fps/351 ft lbs.
    All I can say is OUCH!!! Those things are definately not for the faint of heart or recoil shy/first time shooters or the ladies. I have been carrying 140 grain Hornady standard velocity loads and thought ok maybe I should step up the power scale. I think they had more felt recoil than some .357's. I dunno that I'm going to keep using them as powerful as they may be, I might have trouble with follow up shots if needed. Accuracy out of them is standard snubbie, which is to say they will do the job at 7 yards. I have also used the Speer Gold Dot for short barrel revolver but they had tons of muzzle flash(contrary to Speers' propaganda regarding that). We did also see some elk up on a hill and to my suprise they could have cared less that people were shooting.
    There were quiet a few people, including my BOL, trying to hit a metal target that is 600 yards out and very few folks could hit it consistently. Even if they have whatever the new flavor of the month elk killer in .300 Super Ultra Short Mag or 7mm Maximum Rocket Mag which proves my point that FEW shooters should be trying to take an animal much past 300 or 400 yards unless they can consistently hit that 500-600 target more than 1 shot in 20.[:D]
    0
  • JWolf
    Browning Medalist circa '65.
    AWESOME!!!!!

    Goodbye Ruger 22/45!
    ron
    0
  • JWolf
    This is the first day in several that we didn't have fog so, I was able to get the new, to me, rifle out today. Sine I slept longer than intended and was pressed for time, I decided to shoot off the hood of the Jeep.

    Note to self: Whether it's convenient or not, drag out the bench.

    I had a tough time issolating my heartbeat from the side of the hood, and it shows in my grouping. The final group, lower right, was the result of a folded blanket between my chest and the hood.

    target.jpg

    With a ton of practice I should be up to what this rifle is capable of.
    0
  • JWolf
    Went to the range today to sight in the Thompson Center Ventura in today for the price these are good rifles the action is as slick as my Tikka I got this rifle for less then 350. 00 couldn't be more pleased

    got it from from casey a few months back and put a Vortex scope on it image_zpsbay4kbu6.jpg
    0
  • JWolf
    Took a couple I hadnt fired yet and was suprised how good they operate..I took the 9 mm largo 1921 spanish police pistol the Astra, and been so long since I shot the hopped up 9mm , I forgot just how hot is was.. Extremely accurate.. It will also shoot the .38 auto but I dont have any .38 auto ammo.,.

    astra.jpg

    The 1910/22 FN (browning patent) .32 auto was owned by a Nazi Soldier,was excellant in its performance. Not much bang but accurate..

    Browning.jpg

    Didnt take Beth long to zero in with the 1911A1, after almost a year of not shooting.. A good couple hours spent..[:D][:D]
    0
  • JWolf
    Okay, so I finally got to the range with some stuff other than just my carry weapon. My dad has been up for the week for a visit. We had hoped to get out to the outdoor range, but the weather was not cooperating. We ended up going to the indoor range instead. We had to justify him packing all those weapons in his truck for the trip after all. [:)]

    First up: Glock 23 (with a twist): I took my Storm Lake, drop in, 357 Sig barrel for my Glock 23 (40 S&W) and put about 100 rounds through it. Some might ask "Why". Well, because I can.

    Only complaint: You can't interchange the G23 magazines with the 357 Sig ammo and get the mags loaded to full capacity. The follower is different. 10 round G23 (40 S&W) magazines become 8 round 357 Sig mags and 13 round G23 mags become 10 round 357 Sig. I will have to buy some G32 mags so I can get 13+1 357 Sig rounds into that G23 frame.

    Recoil, using "range ammo" was similar to my 40 S&W ammo. The indoor range only has 25 yard capacity. Out to 25 yards my groups with ball ammo 40 and 357 were very similar, except for the size of the hole in the paper terrorist I was shooting.

    Other than the drop in barrel, I used the factory plastic guide rod and spring for about 50 rounds and then swapped it for my stainless guide rod and 13lb spring. No difference in function or felt recoil.

    If you plan on doing this, check the Glock forums and the serial number of your G23. Some of the older frames are not recommended to change over to 357 Sig. If you have a Gen 3 or Gen 4 you for sure can. IIRC correctly Gen 1 and some Gen 2's are not recommended for conversion.

    Next up, the Dan Wesson 15-2 357 Mag revolver I got from Locust Fork. I test fired it with 38 Special as soon as I got it, but 357 Magnum rounds are hard to come by. I finally got some last week, so it was nice to put some down range.

    This weapon has the big wood grip on it, a nice fit for my paws. After I fired the first round, I was not sure if I had bought a 357 magnum or a flame thrower! The 357 sig rounds had a nice little fireball out the barrel of my G23, but it was nothing compared to that 357 Magnum!

    I was surprised that I could keep a group of shots inside the torso with the 2.5" barrel on the DW 15 with magnum rounds. I recently acquired the tool kit and a 6" barrel and shroud for that little baby. At 25 yards I was putting some nice tight groups in the head and heart area when firing single action. Double action trigger is not unmanageable, but single action is sweet for keeping a tight group. Very impressive pistol. I now need to get some more barrel assembly's for that thing.

    Next up: Savage Model 24 O/U 22LR and 410 combo. This one I also got from Kasey. My first O/U combo gun. My dad had one like this when he was a kid. When I let him handle that rifle, you could almost see his trip down memory lane while he looked it over. He told me that was the rifle he preferred when his mom would send him and his brother out after squirrels and rabbits.

    So, I started out with just one 22 LR round chambered. Pulled the trigger and got nothing. Second strike got ignition and lift off. That was the only malfunction, and I attribute it to the cheap 22 ammo I was using. Next, 410 2.5" target rounds. No problem, and my terrorist was now peppered with tiny little holes from head to groin at a range of about 15 yards.

    I varied my 410 ammo from 2.5" to 3" as well as 000 buck and rifled slugs. It took them all flawlessly. That old rifle performed great and still locks up tight.

    Dad and I traded around our weapons and blew the heck out of some paper terrorists for a couple of hours. It was a good day.
    0
  • JWolf
    I bought a new Kimber Pro Carry 2 on sunday, today I went to the indoor range and put 100 rnds down range, not alot I know but it was all I had time for. Anyway the first 21 rds went center mass at 5 yards, the next 21 went CM at 7 yards then to 15 where they were a bit more spread out but all in the chest cavity area, the rest of that box were also good hits. Changed targets and brought it back to 7 and put 3mags into the head, ran it out to 25 yrds and peppered the body of the target pretty well, I did miss 6 times or at least the shots were un-accounted for. pretty good for a new gun. I think I will hold onto this one for a long while.
    0
  • JWolf
    Well, I finally had the freetime to take my new Marlin 1895 45-70 out to the range the other day. It was an eventful trip and a nice walk through the Knee deep snow to get to the bench and target, but well worth it[:D]. I shot about 15 shots with Hornady Leverevolution ammo with good results. Zero jams and a pretty decent 3 shot group for shooting freehand (had sandbags with me, but that is a long story) at 25 yards. The square is roughly an inch and a half. Lets' just say I was definitely impressed and I think that I may have a new favorite gun[:0]. The only thing that I can see doing in the future is maybe ordering a set of ghost ring sites to throw on it.
    target.jpg

    Jon
    0
  • JWolf
    Took my Rem 700 270 and 308 out
    of moth balls to see if my jitters
    have settled down any.
    At a 100 yds the targets
    looked like they were hit
    with a ten inch pattern of
    buck shot.wobble ,wobble
    0
  • JWolf
    I finally made it the range today, but only had 1/2 an hour to spare. Took the new Beretta 9000S-F in .40 S&W and the Ruger Security Six in .357. The Beretta Neos remains unfired at this point. [V]

    I did OK with the Security Six at 15 yards -- 3" group. With a 2" barrel, I figure that is acceptable. This was also with the factory grips, which were not unpleasant to shoot. I did install a set of Hogue Monogrips this evening, so I'll be interested to see how much of a difference they make.

    The 9000S-F is another story, and I think it needs another trip to the range. I don't know if is the gun or me. I shot it last, and I was running out of free time. Most of my shots were low and to the left. If I aimed at the head of the target, I was able to hit the center consistently with S&B 180 Gr FMJ. With Federal Premium 180 Grain HydraShocks, I was all over the place -- always on target, but no consistency. I picked up some Remington Golden Sabers to see if they make a difference.
    0
  • JWolf
    Finally got some Hornady 44 mag leverevolution Henry Big boy loves them about 3" high at 100 yds compared to remington corelokts nice group for open sights and old eyes my model 29 grouped real good too the colt anconda didn't like them ran out before I could try them in the ruger carbine. forgot to bring camera this time hopefully get pictures of targets next time
    0
  • JWolf
    I bought an Inland M1 Carbine
    and it is fun to shoot.
    What is odd with this rifle is
    that I don't need a scope (tired eyes)
    to hit targets (which I am very pleased to say)
    Easy to reload, fun to shoot.
    I think I'm gonna get a Ruger mini-"something".
    Seems pretty close to the Carbine-looks wise.
    Any advice on which Ruger to get would be greatly
    appreciated.I'm not expecting much in the accuracy
    dept. I shoot steel out to 100 yds 12" plates.
    I have a RRA .223, I was kind of wondering about
    the mini 30.
    Thanks-Ron
    0
  • JWolf
    I had three things I wanted to accomplish today, shooting related.
    one was to drift the sight on my Browning High Power.

    Before
    61013_zps93cf4d48.jpg
    The tools. I sought advice from ATE before I used any of these.
    6109_zps656d5a2c.jpg
    A little bit of marring.
    6108_zpse982cfe8.jpg
    Nothing a black Sharpie cant take care of.
    6107_zpsea8b28de.jpg
    The results. Fired from 15 yards with sand bags (13 shots) GTG for me.
    6103_zps8f6077b9.jpg

    The second item on my list was to mount my new American Defense AD Recon H throw lever mount. I received the mount today and rigged it up with a Leupold VXIII 1.5-5x20. The mounting is so easy that even I didn't have any hiccups. The mount is rock solid and looks good in my opinion. The quality is A+. I will report back at a later date with a repeat 0 test. I have no doubt that the Recon series has Larue looking over their shoulder.
    61010_zps5318cb02.jpg
    6106_zpsa469926d.jpg
    onelastone_zps4c07204b.jpg

    After I bore sighted the carbine I shot some 55 FMJ to get it on paper.

    The third thing on my list was to shoot 2 hand loads I had loaded yesterday,Sierra 52 grain HPBT MK and Midway DogTown 55 grain FBHP. Both loads show promise, but my 8 plus pound trigger does not make for bench rest tight groups. My RCBS trigger gauge only goes to 8 pounds. I had free float hand guards on my list to buy, but they are taking a back seat to a Geissele trigger.
    61012_zps6545e467.jpg
    6102_zps9cb902f3.jpg

    And a Group of PMC Noise Makers
    6101_zps7909f31b.jpg

    A cool hammer tool that has been in the family around 80-90 years.
    6105_zps224de893.jpg
    All put back together.
    6104_zps83553ffc.jpg
    0
  • JWolf
    well...i've had my first gun for about a month now and have finally gotten to take it to the range and get some time with it.


    this is me with my pa-63
    me.jpg



    this is my first target.....all green dots are my fiance's attempt
    100_2046b.jpg
    0
  • JWolf
    Just returned from the range, shot the Glock 17, The Smith and wesson 10mm, and the Taurus Millinium Pro 9 mm

    Glock was right on, needed a little right sight adjustment then it was right on the money.

    The Smith 10mm not too bad, kept em in the black, nice feel to this one

    The Taurus, leaves a little to be desired for accuracy, but again not a bad feeling pistol..

    Either one of the three , I wouldnt hesitate to use..
    0
  • JWolf
    Ruger GP-100

    At 50 feet i was able to keep all the shots on a paper plate. The trigger is very heavy but smooth. I was having problems with the .357's. It seemed like the ass end of the round, where the primer is, is too thick, and it woldnt let me close the cylinder, i didnt have this problem with the .38's, but i think itmay have been the cheap ammo, some kind of American Manufacturers ammo. Other than that i couldnt be happier with the gun, it shot about an 8 inch to 1 foot fireball out of the muzzle. And, as always, the glock functioned perfectly! [;)]
    0
  • JWolf
    Well, I guess I should say 'back yard report'...

    Took the AR's out today for some shootin' fun. The wife wanted to go along too. My buddy was bringing over his AR's, one of which is chambered in .204. Wife wanted to shoot that one in comparison to the .223. She wants one or the other for a coyote gun, but can't decide which (Yay...get to buy another gun!!).

    Anyway did some shooting steel targets at 100yds, then further out. My buddy's got a DPMS HB 24" in .204 and another 24" HB in .223 with a brake, both scoped with some pretty nice glass. Wife shot pretty darn well with both, but the 24" HB's are just too heavy for her taste.

    Then we decided to back up. The furthest we could get was 315 yards, so we decided to try from there. Lots of hits for my buddy and I, but wife unit was having a hard time getting a good cheek weld with the collapsable stocks. Plus we had a pretty stiff crosswind blowing by now.

    My buddy hits a few in a row with his .204 and starts grinnin' (sorta like 'top that!'). Game on; so I grabbed my Bushy 16" M4/A3 with iron sights, clicked it up a couple clicks. He's sayin' "no way are you gonna make..." Just about then I was in position...<Bang>...<ding!> <Bang>...<ding!> <Bang>...<ding> <Bang>...<ding> <Bang>...<ding!>; "Your turn!" says me, with a big fat grin. [:D]

    He hit a couple, then we went back to shooting the other guns. All in all I hit the steel 16 times out of 20 with my iron sighted M4/A3. I thought that was pretty good, considering the wind and downhill terrain.

    Then we walked back and broke out the pistols. Wife recently passed her CCW so she wanted to get some training/practice in (wants a CCW pistol also...YAY, get to buy another gun!). She had never shot a centerfire pistol before, let alone a 1911. Well, holy crap, this girl can shoot!! She even did the 'Hot brass dance' when she took one down the brazier. [:D] She did great thought, and we all had a blast!

    Nothing like the smell of burnt gunpowder in the afternoon breeze!

    [^]
    0
  • JWolf
    took the encore 7mm-08 out this weekend to site it in for deer season
    the one in the bulls eye was the 3ed shot the other 3 above it were
    the 1st two and then the 4th shot. not bad for a 100 yards the shot on the left and right were at 150 yards and I could not see the black bulls eye with the 4x scope (the cross hairs covered the thing up)
    not bad out of a 15" pistol
    I may work on the 150 yard shots some more but for this season Im sticking to 100 yards or less untill I get to shot it more.

    IMG_0014-2.jpg
    0
  • JWolf
    Just bought my 6 year old a Cricket rifle for her birthday. I must say the gun is very low quality and I'm not impressed a bit with the thing. I'd rate it about the quality of a raven or jennings. Had several issues with the bolt out on the range.
    0
  • JWolf
    First time I've been to the range in a couple years. Pocket pistols both fired all rounds (that had been in the guns for ages)

    I function fired some .38 snubbies. All seemed to hit more-or-less at point of aim., but the Rock Island Colt style won't function in double action.

    I was extremely pleased with the Rock Island 1911 9mm (first 9mm auto I've ever owned). Very tight groups.

    Rock Island 1911 .22 was very disappointing repeated failure to extract. I was limited on time as I didn't get to the range until almost sundown so I didn't spend any time trying to make it work.
    0
  • JWolf
    I went to the local police range this morning to sight in my hunting rifle for deer season. I figured, "Since I'm going to the range, I might as well shoot my M1A, too...."

    Here's my first set of shots with my Remington 700, chambered in .270. Not the best shots, but since I don't take very long shots, and I killed two last year with two shots, I should be OK. I'm pleased with the one exact bullseye!

    l_714f9c33c894401e998cef27058a7420.jpg

    OK, on to "Jayne," my M1A....first I did 20 shots, adjusting my sights after every 5 shots. I didn't take a picture of this target because they were bad. However, here's 20 consecutive shots at 100 yards with open sights. The breeze was fairly gusty, too, so not too shabby, I think.

    l_70d680f3b4604d208790e922fd493f62.jpg
    0
  • JWolf
    Went to a local indoor range nearby here today. Not my normal range, but these are nice guys. Wanted to try some different .45 loads (all hollowpoints). The rangemaster says "no hollopoints unless you're the only one on the line" (they've had problems with them fraggin'). Okay, no problem. I understood.

    Well, I only had two other pistols I wanted to shoot. One was my little .25 auto, and that was fun. The other was my Ruger SBH .44 mag. I asked if it was okay, and they were fine with it (provided I was shooting FMJ's...and I was).

    There are 8 lanes. Shortly after I got done shooting my .25, a couple new guys came in. One was an instructor, the other was a student. I was cleaning up some brass and making my range bag orderly while he was instructing his student.

    It took me a few minutes to get ready to shoot with the .44 mag. I loaded up six rounds and took the target out to 25 yards. They were busy plinking away with some 9mm or something. The instructor starts telling his student about how he's got some 'big' gun that he can shoot sometime when he learns the "rules". I didn't look, but it sounded like a .357 mag (maybe). The student walks around the back of his instructor and he's watching. The guy was a good shot. He was 'x' ringing at 5 yards [:D]

    I pull up the SBH and fire one round. Fire shoots out like your usual .44 mag shot. BOOM! The student FREAKS. "GEEZUS...WHAT THE H#LL WAS THAT???" BOOM!! ... BOOM!! I hear the instructor say ... "some kind of cannon...", then he says "Bill???"

    The guy totally bolted out of the door!! He was outside! The rangemaster called to him and told him it was okay (but he later said he was even flinching and ducking outside!!!).

    I kinda felt bad for him. I hadn't even planned on shooting my .44, but because I couldn't shoot any hollowpoints, I really didn't have much choice. Besides, I hadn't shot my SBH in a couple months.

    (sorry to scare the new guy...I honestly didn't mean to).

    FCD

    "Fortes et liber"
    0
  • JWolf
    Here is my sight in target for my Remington M700 5R Mil-spec barrel in 7.62x51. I started at 25yds. and moved it out to 100yd once I had the zero close. All shots taken with Winchester 150 grain power point. I will be switching to a 168gr. bthp as soon as I get my reload supplies. I also included a picture of the rifle.
    1216577337.jpg
    100_0605.jpg
    100_0607.jpg
    0
  • JWolf
    I went out to shoot my 1896 Swedish Mauser 6.5x55 today. Making a long story short. Results are: 140 gr. Core Lokt Remington; 4+" group at 85 yds. (odd range, I know). 120gr. Nosler Balistic Tip Handload; 1.5" group, same distance. Conclusion: Remington Factory fodder sucks in my rifle. I shot two groups of 3 from the Remington box 1ST, then shot one group of 3 shots of the Nosler. If anything, the Remington had the advantage of a cleaner barrel, and a cooler barrel. Purpose of this exercise was to decide whether or not to continue on with a sporterizing project of an old stock for this gun. The project will go on, that group is promising, and good enough if it doesnt get any better than that.
    SSgt Ryan E. Roberts, USMC
    0
  • JWolf
    Finally got a chance to shoot my S&W Model 10-6. 4" heavy barrel.
    I love it.
    Shoots far easier than any of my Sigs. Cut the center dot out at 25 feet

    I could knock down the 6" plates at will.
    I'm shooting my cast reloads and it just ate them up.
    I am more than thrilled.
    I will see my father in law and thank him again for his generosity in giving me the gun.
    I put a set of mother-of-pearl grips on and she's beautiful as well.

    Not smart enough to post pics from my Kindle
    0
  • JWolf
    SKS worked well, shot 200 rounds of my wolf ammo...FUN...we were all safe none of us were hurt...(friend got burnt on barrel,his sks), I would never get my SKS barrel that hot. Bottels and targets didn't stand a chance...
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?