new toy
I just bought a NIB Caldwell Lead Sled for 92 bucks. Was that a good deal?
0
-
Smith & Wesson Jerry Miculek Signature Model 929 Performance Center 9mm Revolver, I added the Jerry Miculek grips. Bought right here on GunBroker. 
0 -
G26..Eat your hearts out Glock haters![:D]0 -
Trying to catch a few hogs. They are tearing up the groves. Don
The camera in the second pic is linked by phone to the gate. You release the gate when you see the hogs in the pen.0 -
New toy. Wby vanguarg in 300 Wby mag, 80 rounds through it. I put the scope on. I bet this thing would kick like a mule without this recoil absorbing stock. only problem is, even though there is little felt recoil, this thing whips like a sum *****!!!! Will have to learn this thing. 0 -
I found this used 4x4 this week and just went and got it to go hunting with next weekend. Its a monster. Its a 2006 4X4 POLARIS 700 EFI. 0 -
After Three (3) years, yes three! Last week I bought a 1895 Cowboy 45-70[:D].
Already went to the range.
Turns big things into MANY little things; pumpkins, watermelons, gallon water jugs... [:p]
Amazing what a 360gr bullet does to objects.
Love the new toy, wife is even a little impressed, so are her two (2) boys. Been taking them to the range with me. Teaching the oldest about reloading[:)] trying to keep the art of reloading going. He might even be as good as me in ten or twenty years (bragging just a little).
Hope everyones week was a good as mine!
travrler.0 -
Installed a matchweight (new in wrapper shipped for $162.50 off ebay)on my old USP
I have a match trigger on order, and a Jarvis 6.02" ported barrel is being cut. I woun't be shooting it with the weight on and the short barrel, but just had to post it cause I'm so thrilled with the deal on the weight.0 -
Found a new toy today. The local smith brought out a Remington XP100R in .223 that had been made into a rifle. It has a synthetic stock, 2 inch muzzle brake, and a very nice trigger in it. Also on the shelf in the "used" section found a nice weaver 4X16X42. All in all, I am looking forward to going to the range tomorrow.
1 Cross + 3 Nails= 4given0 -
Picking up my new FN 5.7 tomorrow!
Here is a pic and discription of it. I will post shooting results after I try it out at the range! I know that the uses of this pistol are limited, but I really like the design and the round is interesting to me.
http://remtek.com/arms/fn/57/
I am also picking up a brand new OD G21 for duty use. My old G21 is a second generation and does not have the rails for the light. I may sell the old G21 on GB for about $300.00 if there is any interest. If any of you recall, I painted the upper slide in Duracote (tan). I may sand it down again and refinish it in black if there is no interest.0 -
Ok folks I worked a deal on this 357 and got it for 225.00 shipping and all
did I do ok
Taz
ps it shots great
http://www.gunbroker.com/Auction/ViewItem.asp?Item=557281230 -
Wife got me a H & R ultra in 308 today Nice looking stock, put a vari X II 3x9 on it and waiting to shoot it. Anyone, hows the accuracy for this rifle ?
~Secret Select Society Of Suave Stylish Smoking Jackets~0 -
Bought me a DPMS AP4 LR-308 carbine yesterday at the show in Marietta,
Now, need to scope it any ideas? The dealer sells the EOtech and with the magnifier it would be about 900 bucks. Have always used iron sights and know nothing about scopes. Going to try and make it to the range today to get the iron sights dialed in.Any recommendations?0 -
Well I just picked up another good one at my favorite local gun shop. Anyone know what these are selling for now days?
I found a Thompson 1927a3 that was made in 1980 based on serial number. This thing was very dirty so I was worried about it running. Dealer ran a mag thought it out in the bullet trap. I took it home and fired a mag and could not figure out why I could not hit anything.
I took it home and started cleaning it up since it was so dirty. I have not noticed that the
Cutts was plugged up. Well 2 of the slots were completely plugged and had a cone shape in the direction of bullet travel. I pulled the compensator which was so plugged that I am shocked the bullets were actually making it through. With a chisel and hammer I went to town on the lead build up. Of the lead I could recover I got 275 grs, I am guessing there was closer to 300 grs total.
The only real problem with this gun is the finish on the bbl is wearing off. It is not scratched, or flaking but is just discolored for some reason. This gun is very light and I am guessing most of it is made of aluminum. Is there any good way to fix this. I am not sure if I want to refinish this gun since only about 4500 were ever made.0 -
Picked up my new toy this morning, 1998 For Ranger 5.0. Nasty, fun little truck to run around in. Has a 1999 5.0, mustang rearend with 3.73's. C4 with manual valve body, and some other goop I am forgetting. Went cruising through town, love the looks when people realize what is making the rumbly noise. 0 -
stopped by the pawnshop on the way home yesterday and found a remington 890 express youth 20 ga mag, wood stock in very nice shape. i couldnt turn it down. with tax and all it was $160. it has the 20 inch barrel, and the youth stock, but it still fits me nicely (6', 200lb). im thinking of keeping it behind the seat in my ranger as a truck gun. 0 -
Just picked up my latest purchase. I had one of the original Millennium PT140s. Loved the size...but it shot low to the point of aim and the trigger wasn't all that great. This is a Pro model. The grip is a little smaller but other than that, I think I will like it. The seller was a competitive shooter and was actually nice enough to shot and email me a target when I expressed concern over the point of aim. Of course the day I pick it up I get the Ruger newsletter unveiling their SR40[^]
Just realized I didn't put the link in...duh!
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=1926681710 -
picked up the new 06 today from the friend I bought it from.....rem 700 adl black synthetic....never been out of the box got it and a hardcase for $300....I think I did ok......will take it out next weekend and tell yall how it shoots
imay not know it all.....but at least I know that!0 -
I always wanted a Henry Golden Boy and i always wanted a .17 HMR rifle, so now i have the best of both worlds, a Golden Boy in .17 HMR!
Just picked it up today!0 -
pick this little 22 up today for a whooping 150.00 came with two mag's a 25rd and a 30rd 0 -
Was looking for a blued Marlin 1895 in 45-70 with a 22" barrel but this came across my lap and I couldn't refuse. 1895 Stainless Guide Gun 45-70 unfired in box. Buddy's friend won it in a $25 raffle and had no use for it and needed some cash. I gladly relieved him of it for $450. He thought it was great that he profited $425 and I thought it was great I got it for way below MSRP. Wasn't exactly what I wanted, but couldn't pass up the steal, I mean deal.
[img][/img]0 -
I went to the Tampa gun show last weekend on Sunday and I found a guy selling the sightmark photon 6.5x50L night vision scopes . He gave me a real good deal on the scope and quick detach base. I mounted it up this morning on a radical arms AR in 300 blackout for some night time hog hunting in my future. Looks like it's going to be fun once I figure out how to use it. I tried it tonight after I got up but for some reason it wasn't working just right for me. I realized afterwards that I had turned the scope on but not the illuminator, oh well. 0 -
traded off my little taurus mod85 for this m&p ar15-22 0 -
Thought that was an interesting toy, when you asked about it last time. So, you found one. Let me know how it shoots.
(when you get the new barrel, of course. [;)])0 -
You got a deal. Last time I saw one they were $225. Looks like you'll need a Funnel Jet and Expert magazines. Let's see my expert magazine holds 18 of 9mm so with a 40 S&W it should hold 16 rounds.
You can shoot it with stock barrel. You'll just have to clean up the powder burn off the channel.
I got a Quick-Comp and like me, you will see it'll be a pain to clean the gun[:D]. My Q-C is in a Zip Lock bag these days next to the Scope Mount (rare and expensive parts collecting dust[:D]). But the Jet Funnel and Expert Magazines were money well spent.0
Please sign in to leave a comment.
Comments
54 comments