Skip to main content
Help Center Community Shop

Looking for a part

enfieldhunter
I have an old Antonio Zoli/Navy Arms 2 Band Musket and the sear nose wore off. I'm having a difficult time finding the part. Anyone know of where I might come across one? Or a sear that might work. Or even a good smith that could fix it up?

Bill
0

Comments

21 comments

Date Votes
  • allen griggs
    If these guys don't have it you are in trouble.
    Try calling them.
    Great tech support at Dixie.

    http://www.dixiegun.com/
    0
  • enfieldhunter
    oh yeah, already talked to them. no luck there. i actually have a possibility with these guys: http://www.ssfirearms.com/ but it will have to modded slightly. evidently they do it frequently there. i'm going to wait and keep looking though. i'll probably try to get in touch with some skirmishers and see what they know.

    thanks for the reply.
    0
  • Old Gunny
    I may have the parts you need- if you can send me a trace outline of the hammer/sear- I also have a front band with bayonet stud for a SMLE- and other ex-military armorer goodies
    0
  • rgerge
    try www.VTI.com
    0
  • enfieldhunter
    quote:Originally posted by rgerge
    try www.VTI.com

    a technology company? nice spam! [V]
    0
  • enfieldhunter
    quote:Originally posted by Old Gunny
    I may have the parts you need- if you can send me a trace outline of the hammer/sear- I also have a front band with bayonet stud for a SMLE- and other ex-military armorer goodies


    thanks gunny. I actually found one from Lodgewood and it should be here in a couple of days. I'll try to trace it when I break it down for that. sounds like I should have extras on hand!
    0
  • enfieldhunter
    quote:Originally posted by Old Gunny
    I may have the parts you need- if you can send me a trace outline of the hammer/sear

    gunny, i have some photos, how do i send them to you?
    0
  • enfieldhunter
    Gunny - I've posted the photos here: http://www.billbolte.com/gun-lock/. Click the thumbnail to view the full size image (they're full resolution, so they're a bit large). Let me know if that gives you enough to go on. I'm still waiting for that part to come in (should've been here last weekend) so I haven't broken the lock down yet - I don't have the tools. Thanks.

    Bill
    0
  • Old Gunny
    Enfield= good fotos- and the thumbnails asmd the enlarging feature are a big help- also using a machinist's scale (old Wescott- used to make school rulers too) The parts I have work from a coil spring front sidelock design- the hammer I have might fit-but you have a right side single hammer on this rifle, correct. I'll blow up the fotos and use a magnifier, see if what I have could be re-fitted w/o re-inventing the wheel- if so I'll send them to you, your only cost would be to reimburse me for the USPS surface rate shpg-nickle and dime deal- looks to me like either someone had it apart before you acquired it- or else the Zoli Navy arms actioners aren't quite the same as the Purdey/H&H crew- I have seen those sidelocks, some even gold plated- like seeing a Romex watch "stripped"- Is this a re-enact-ment piece you use often?? OG!!
    0
  • enfieldhunter
    quote:Is this a re-enact-ment piece you use often??
    I actually picked it up at from an online auction - probably should have let it go. i've fired it about 10 times and the sear went. if i can get it in working order and it shoots straight, i'm going to use in the muzzleloading deer season this fall. so, in short, i'm not a re-enactor, i just like the old military rifles. i have a Savage Enfield 303 that i used last year during rifle season (got my first deer with it to!). thanks a bunch.

    Bill
    0
  • enfieldhunter
    any luck gunny?
    0
  • smokeymt46
    Try cainsoutdoors.com they are affiliated with a machine works they maybe able to make one or even have one. They are located in Willamstown, West Virginia 26187 800-445-1776 Larry
    0
  • Spider7115
    quote:Originally posted by enfieldhunter
    quote:Originally posted by rgerge
    try www.VTI.com

    a technology company? nice spam! [V]


    He meant this: http://www.vtigunparts.com/
    0
  • rgerge
    Bill, I'm sorry, I thought you would of figured that out by yourself.[B)]
    0
  • rgerge
    Bill, try this guy, at www.flintlocksect.com his name is Richard, he was general manager of navy arms for a while, his phone is
    413 698 3822, he can git you one.
    0
  • Spider7115
    quote:Originally posted by rgerge
    Bill, try this guy, at www.flintlocksect.com his name is Richard, he was general manager of navy arms for a while, his phone is
    413 698 3822, he can git you one.


    He meant this: http://www.flintlocksetc.com
    0
  • rgerge
    ooops, my bad, good intentions though.............
    0
  • enfieldhunter
    quote:Originally posted by rgergeooops, my bad, good intentions though...[;)]
    thanks rgerge and others, I'll check these out. I did finally find a sear that we modified a bit to work, however, I'm having trouble finding an extra nipple now. Thanks again.
    0
  • rgerge
    I have one that came off a navy arms "zoli" buffalo hunter, email me and you can have it, eck49@hotmail.com
    0
  • rgerge
    Bill, you'd better send me a Christmas card, enjoy!!
    0
  • enfieldhunter
    quote:Originally posted by rgerge
    Bill, you'd better send me a Christmas card, enjoy!!

    [:D] Deal
    0

Please sign in to leave a comment.

Recent Activity