Skip to main content
Help Center Community Shop

Film, Absolute Power w/Clint Eastwood ????

Comments

3 comments

  • nmyers
    Did not like the movie, even though I appeared in it (as an extra). I was in a group of newspersons, taking photos at the press conference in front of the court house.

    In any case, I don't know that there is a name for the barrel removal system, but I call it "interrupted threads". It's still used by Browning in their ".22 auto rifle", the one with the loading hole in the stock. They use a threaded ferrule on the barrel to tighten the barrel, should the threads become worn. It's been many years, but there used to be a gunsmith who would convert bolt action rifles to takedown by cutting the threads in the barrel & receiver. I suspect that you may run across a custom rifle that has had this done, but they have to be scarce.

    Neal
    0
  • us55840
    I wasn't interested in the barrel installation system but the scope installation, a simple 90 degree twist onto the receiver with point of aim retained.

    The only mounting system I've seen that allows the scope/mount to be removed and re-installed on the rifle and retain perfect point of aim is the Heckler & Koch 05 scope mount with the locking lever on the side.
    :?:
    0
  • buschmaster
    I think I saw one of those in person, back in the 80's. once. don't remember anything about it. but that doesn't help you.

    if they were that good you would be seeing them all over the place.

    you might be interested in these

    http://armsmounts.com/product-category/mounts/
    0

Please sign in to leave a comment.

Recent Activity