Skip to main content
Thank you for your patience as we work through our high volume of requests. If you need assistance with 2FA, please provide the correct phone number in your ticket request so we can assist quicker.
Help Center Community Shop

Winchester 1890 ?

Comments

4 comments

  • charliemeyer007
    https://en.wikipedia.org/wiki/Winchester_Model_1890

    As a shooter I would get a different stock or properly fix the one that is there. Re-blue is up to you. I have helped hot salt blue 100's of firearms. They sure look better - worth more or less depends.

    I have a 06 that I'm very fond of. Dad had a 90 in short that was like brand new. I think he bought it in the 30's. He sold it before he died I have no clue what he got but it was good money.
    0
  • Bert H.
    The serial number identifies it as being manufactured in June, 1919. Winchester added the 22 Long Rifle chambering to the Model 1890 line-up in 1918, and they continued to offer it through July 1942 (when the final parts clean-up Model 90 rifles were assembled).

    The total number of Model 1890(90) rifles manufactured in 22 Long Rifle was considerably greater than most collectors & dealers were lead to believe by past authors. Based on the research survey that I have been involved with, the least common cartridge chambering was actually the 22 Long. With that stated, the 22 Long Rifle chambered rifles do bring a premium value over the other (3) .22 rim fire cartridges. Based on the current survey results, Winchester manufactured just over 30,000 Model 90 rifles in 22 Long Rifle from March 1926 through July 1942, with several thousand more in the 1918 - 1926 timeframe. My estimate is that the total was approximately 45,000.

    Based on your description of the rifle, I would not be inclined to grade it as high as 60-70%. The broken/damaged stock is a big minus to the graded condition, and the bluing loss adds to the reduction in the graded condition.

    I would not recommend having the rifle refinished, and No, it would not be worth the cost to have it refinished. What I do recommend doing, is find an original butt stock and replacing the broken stock with it. If you can find a butt stock with its original butt plate still on it, that would be preferable.
    0
  • pip5255
    I would repair the stock if possible, clean it up a bit to prevent any rusting and use it like that.
    0
  • dav1965
    Thanks Bert i have no clue on how to grade a rifle. Its missing a lot of bluing but is not pitted or have deep scratches. Its just worn off. Plus the inside of the barrel is in great shape.

    Thankfully the inside of the barrel is in better shape than the outside.

    I have not looked at the stock to see how bad the crack is. I am going to take it apart and see if i can fix it to where i can take the gun squirrel hunting.

    Worst case i will replace the stock. I just want to make it a good shooter so if i need to grab a 22 rifle i could grab this and not worry about it breaking.

    Thanks for the info.
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?