Shameless plug CZ52 No Reserve Penny Start
h ttps://www.GunBroker.com/Auction/ListAnItemComplete.aspx?Id=797992963
https://www.GunBroker.com/item/797992963
Looked unissued; I've put maybe 1500 rounds through it at ranges.
New milsurp barrel installed; I tested it with 50 rounds of Winchester white box and it shot to point of aim. Other than that it's still new. There wasn't a wear mark on it but it looked like it got a few rust spots in storage.
It's been taken apart by an amateur and the pins may eventually walk around a bit if not restaked. They stayed in place during the 50 round test fire.
The original barrel, which I threw out, had probably fatigued from the use of .312 bullets as it was pitted right inside where the barrel meets the chamber on top, and only there. Pitting can be caused by metal fatigue.
I mostly used the mild charges in the latest Accurate Arms data, not the old super hot charges people used to recommend for these things.
https://www.GunBroker.com/item/797992963
Looked unissued; I've put maybe 1500 rounds through it at ranges.
New milsurp barrel installed; I tested it with 50 rounds of Winchester white box and it shot to point of aim. Other than that it's still new. There wasn't a wear mark on it but it looked like it got a few rust spots in storage.
It's been taken apart by an amateur and the pins may eventually walk around a bit if not restaked. They stayed in place during the 50 round test fire.
The original barrel, which I threw out, had probably fatigued from the use of .312 bullets as it was pitted right inside where the barrel meets the chamber on top, and only there. Pitting can be caused by metal fatigue.
I mostly used the mild charges in the latest Accurate Arms data, not the old super hot charges people used to recommend for these things.
0
-
Link doesn't work for me.. Says it's invalid. 0 -
That second link works, nice pistol! 0 -
imo, post the pic of the holster and other mag. 0 -
Thanks for the better link, MontanaJoe.
It's just a standard Czech military holster, a little used but OK.
I just got back from testing it with my last box of Winchester white box ammo. Every round went off perfectly and I divided the rounds between the two mags which I loaded fully each time. The pins did not walk.
My limited testing seemed to indicate the barrel still shoots to point of aim despite being new.
The factory ball was a little hot as usual and dented the case necks badly. Reloads at the original standard 1390 FPS level don't do that.0 -
Welcome!![:)][:)] 0
Please sign in to leave a comment.
Comments
6 comments