please help! old double barrel blackpowder
ok well i can email the pictures of it but i am not sure how to post pictures on here... what im looking to do is find a new stock because it is cracked, also i would like o know the history and quality of the gun.
0
-
Right above the title of your thread are instructions for posting pictures: http://forums.GunBroker.com/topic.asp?TOPIC_ID=259294
Please post clear, close photos and describe any and all markings.0 -
[img][/img] 
[img][/img]
[img][/img]
[img][/img]
[img][/img]
[img][/img]
[img][/img]
[img][/img]
[img][/img]
[img][/img]0 -
Although your pictures are very small, it is definitely Belgian based on the "ELG" stampings in this picture.
There were literally millions of these made by various makers such as gunmaker Henri Pieper and there's no way to give you a history.
They have a very limited collector base and don't bring a lot of money in the market unless they are in excellent condition.
As far as a replacement stock goes, you might try to find a stock maker who can use the existing stock as a pattern but I wouldn't put much money into it. It's really best relegated to your den wall.0 -
0 -
You might consider repairing the existing stock. If the wood is sound and not oil soaked repairs could be done very cheaply DIY.
BigLoop22's last pic shows the nipples are in poor condition, I'd bet the bore isn't much better. Likely a nice wall hanger, would be it's safest function.0 -
History must be supplied by the owner. Perhaps we could tell you when the gun was made and by who but its history starts when it was sold and only the owner would know that. Maybe the gun supplied meat for a farm family or it was used to stand off Indians in the 1860/70. No one would know that except the owner. 0 -
sorry for the late reply, thanks everyone i will look to find someone to try and remake the stock and try to repair the original stock and parts. it will stay on the wall but it would be nice to take out one deer with it just for the sake of it. 0 -
quote:Originally posted by 67okeefe67
sorry for the late reply, thanks everyone i will look to find someone to try and remake the stock and try to repair the original stock and parts. it will stay on the wall but it would be nice to take out one deer with it just for the sake of it.
Do not load and/or shoot this gun until you have it thoroughly checked out by a gunsmith who is used to working on blackpowder firearms! This is not just a matter of your personal safety, but anyone near you when you fire this gun.
Even after having the gun checked out, I would not load it with a full charge the first time around. Load a half charge blank into each barrel, fire, and work up the charge in at least two more increments, until you have a full charge of powder. This should be done in one shooting session.
That should re-condition the metal so you can safely fire normal loads in the future.0 -
First challenge will be getting those broken nipples out and replacing them. But before even doing that, get a rod or dowel stick and measure down inside of barrels to see if old loads are present:
These were commonly left loaded so that only capping the nipples was required, and accidents have happened when heat was applied.0
Please sign in to leave a comment.
Comments
9 comments