Remington 512 Sportsmaster

DerBarbarian

July 05, 2013 13:21

Hey guy's I have a couple of quick questions, I have an old Remington 512 Sportsmaster, I used to take it out quite a bit, but something broke and I'm not quite sure how to go about fixing it. When you pull the bolt back, it ejects the fired cartridge, it pops the feeding ramp with a new round up, close the bolt pull the trigger and boom. The part that's broken is the feeding ramp/device I'm not sure what the technical name of it is so I figured feeding ramp would do. Out of maybe 10 times it'll work once maybe twice, but never more than that. I would like to get it repaired, I know these aren't worth more than $150-200 but it's been with my family since it was brand new, not to mention it's a great little plinker. I can't imagine there's too terribly much to these I haven't found any good reliable places to get the parts from, I found one but they were mostly sold out of everything, and looking at the schematic I can't seem to find the exact part in question. Any help would be greatly appreciated!

0

• 

  rufe-snow

  July 05, 2013 14:05

  I'm not sure, probably either # 54 or #56, Carrier or Cartridge stop?
  
  

  0
• 

  TRAP55

  July 05, 2013 19:44

  http://stevespages.com/ipb-remington-510.html

  0
• 

  OleDuk

  July 31, 2013 21:00

  Hi Barbarian,
  Of the pieces you ask about, one of them is the lifter which receives the cartridge from the magazine, is cammed up, and puts the cartridge in line with the chamber mouth.When the bolt is then pushed forward it pushes the cartridge into the chamber and is ready to fire. The other part I can't find in my memory, but I can tomorrow on a printed page.
  I think piece #45 is the safety.
  The drawing itself is somewhat confusing because it illustrates the Model 511, the bubbles try to show the schematics for the 510 and 511. The 511 drawing for the 511 is also for the 513 except for the 513 heavy barrel.
  
  Cheers
  
  OleDuk

  0
• 

  charliemeyer007

  July 31, 2013 21:38

  http://www.gunpartscorp.com/Manufacturers/Remington-33454/Rifles-37895/512-39509.htm?results=All
  
  They have some parts listed. You need to figure out what part is worn or broken.

  0
• 

  OleDuk

  August 01, 2013 22:46

  Trap 55 has provided a better parts breakdown than the one I commented on yesterday.
  OleDuk

  0

Please sign in to leave a comment.