H&R Model 999

Elmo26

March 25, 2012 14:25

Hey guys a friend of mine asked me to take a look at a gun that he has it's a H&R Model 999 on the barrell it says End of Chisolm Trail Cenntenial 1867-1967 he also has the original holster that has the same stamping on it. Can anyone tell me what its worth and where I can find a parts schematic on it.

0

• 

  Elmo26

  March 25, 2012 14:25

  I have recently received an H&R Sportsman with a serial number of AP1*****. It was my grandfather's. Any idea the date of manufacture?

  0
• 

  amblerrl

  March 25, 2012 15:22

  don't know the value but numrich arms will have a schematic. i used it once to find a spring for my 999

  0
• 

  Elmo26

  March 25, 2012 16:32

  Thanks a lot I found the schematic there right after I posted. The issue that it is having is that the cylinder isn't rotating I don't know if this is a normal problem any feed back would be helpful

  0
• 

  Knifecollector

  March 25, 2012 16:36

  I'd start by checking the hand spring, thats probably the most likely cause.

  0
• 

  Elmo26

  March 25, 2012 16:50

  Thanks for the help any idea on the value

  0
• 

  Knifecollector

  March 25, 2012 17:11

  All depends on condition, but the 999 is a popular model and being a commemrative doesn't hurt either. I'd say roughly $500, without seeing it.

  0
• 

  Fatstrat

  March 27, 2012 11:45

  You might try removing the cylinder and METICULOUSLY cleaning the entire cylinder/ejector system. Take it all apart (easy), soak and scub. Repeat & repeat. With the working parts inside the cylinder, this model has nack for getting junked up in that area. Unless carefully cleaned often.

  0

Please sign in to leave a comment.