Skip to main content
Thank you for your patience as we work through our high volume of requests. If you need assistance with 2FA, please provide the correct phone number in your ticket request so we can assist quicker.
Help Center Community Shop

sub cal. inserts??

MIKE WISKEY
any body know what these are for, 10 ga. thru .410. the .410 takes a 209 primer, the rest take .44/40. got them is a package deal years ago.
V0rmQzXl.jpg
0

Comments

9 comments

Date Votes
  • charliemeyer007
    Hard to say exactly. Cowboy companion for scatter gun to pistol/carbine round. Un rifled good for making noise, short range with bullets at best - might be for 44 shot rounds as reduced loads around the barn.

    The 410 might be along the lines of an Everlasting case or training blank/dummy launcher for dog training.

    If steel could date back a long ways, Aluminium more recent I would guess.
    0
  • mrmike08075
    For studio prop department use - with blanks most likely

    That way the gun goes bang on film and you don't need a whole bunch of different ammo to keep track of or be safe with...

    Either for film or a traveling show group or circus type act or wild west show.

    Mike
    0
  • MIKE WISKEY
    Probably intended for those 5 in 1 blanks I'd guess
    0
  • mrmike08075
    Yes 5n1 blanks would be by best guess - I have a few boxes set aside somewhere in the hoard pile...

    Mike
    0
  • gnprts
    Mike W. The 410 is used inside the others in your set to test firing pins hammer spring strength etc for all the gauges. Does the 410 have the punch inside it to knock the spent primer out?
    0
  • MIKE WISKEY
    "Does the 410 have the punch inside it to knock the spent primer out?" .........yes it does, but the 'o' ring makes it a very tight fit in the others
    0
  • babun
    Look here...[8D] Some other types

    https://www.riverjunction.com/Blanks_c_47.html
    0
  • gnprts
    quote:Originally posted by MIKE WISKEY
    "Does the 410 have the punch inside it to knock the spent primer out?" .........yes it does, but the 'o' ring makes it a very tight fit in the others

    I used one of these for years with the O ring missing. My guess is the O ring has been replaced with the wrong size. This is kit is a handy tool.
    0
  • gnprts
    quote:Originally posted by gnprts
    quote:Originally posted by MIKE WISKEY
    "Does the 410 have the punch inside it to knock the spent primer out?" .........yes it does, but the 'o' ring makes it a very tight fit in the others

    I used one of these for years with the O ring missing. My guess is the O ring has been replaced with the wrong size. This is kit is a handy tool.

    Your kit has 1 each 10ga. 12ga. 16 ga 20 ga. 28 ga. and the steel one is 410
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?