Stevens model 301, 410

bridgebuilder41

November 27, 2018 16:23

The Stevens model 301 410 has a screw in choke system,what type of thread do the chokes have?

0

• 

  charliemeyer007

  November 27, 2018 17:59

  Cut and pasted "... the muzzle end is threaded for Win-Choke choke tubes." 2017 article on the Model 301. You might ask Savage.
  
  This lists a 3rd generation Win-choke 410, might not be the same as your Stevens. http://www.nulineguns.com/part_choke_215_3_31_36.php
  
  I would measure the diameter and use a thread pitch gauge on your choke tube.
  
  Not on this list https://www.cabelas.com/custserv/custserv_popup.jsp?pageName=TechSpecChokeTubeInterchangeComparisonChart
  
  or these either
  https://www.choketube.com/downloads/Carlson's-Interchange-2017.pdf
  
  https://trulockchokes.com/choke_interchange_list.html
  
  added scroll down to the bottom 13/64 - 32 TPI is at least one version
  
  http://pacifictoolandgauge.com/611-shotgun-taps-nopix-

  0
• 

  rufe-snow

  November 27, 2018 19:49

  I had a Winchester Model 59 shotgun, years ago. It took Win-Choke screw in chokes. I believe it was one of the first shotguns that Winchester made, that took these chokes. It dated to the early 60's. And was 12 gauge, they didn't make them in 410..
  
  You might check for other Winchester shotguns. To see if you can locate a source for 410 Win-Chokes. The only ones that I can think of, was that 410 lever action. And the Japanese made doubles.

  0
• 

  Tflogger

  November 29, 2018 13:36

  Try Carlson's

  0

Please sign in to leave a comment.