cleaning a nickel revolver

VonFatman

March 28, 2018 17:40

i have a nickel smith and wesson model 15. i need to get it cleaned up (see pic).
any suggestions? i need the powder marks gone but do not want to mess up a nice revolver.
thanks!
bob

0

• 

  Bill DeShivs

  March 28, 2018 18:09

  If you are going to keep shooting the gun, oil it up and put it away.
  If you are not going to shoot it for a long time, or are going to sell it, you can use Simichrome polish (or Flitz, Mother's, etc.)
  Apply it sparingly to a soft cloth, and gently scrub the carbon deposits.
  Be aware that each time you do this, you are removing some of the nickel plating. It can only safely be done a few times before you polish through the nickel.

  0
• 

  toad67

  March 28, 2018 18:37

  I've used Flitz and other type of abrasive polishes. They will change the appearance of the finish, and make it look different. Try mpro7 for the powder removal, I think it's a great product, and has worked very well for me..
  
  http://www.mpro7.com/m-pro7-gun-cleaner.html

  0
• 

  charliemeyer007

  March 29, 2018 01:47

  Elsewhere it was reported S&W said Hoppie's Elite. I'd try a soft cloth and WD-40. Any copper solvent is a pour choice and should be cleaned off quickly.

  0
• 

  VonFatman

  March 29, 2018 04:19

  thanks gents. i have mother's and flitz on the shelf. i had used them to clean a stainless gun to two. i just did not know about nickel.
  
  bob

  0
• 

  Aztngundoc22

  March 29, 2018 05:04

  OK :
  
  Miracle Cloth !!!
  
  Have used them for years ! Great !!!!
  
  Thanks !!!

  0
• 

  Bill DeShivs

  March 29, 2018 08:57

  Miracle Cloth is really too abrasive to use on nickel plating.
  Try the suggested carbon-removing chemicals before you use any abrasive. (And, Flitz IS abrasive!)
  If you do use a polish, use very light pressure.

  0
• 

  yoshmyster

  March 29, 2018 11:14

  Ain't there a spray one uses before shooting to reduce crap build up? I'm thinking something for black powder? Just can't remember the name of the spray. It should work for regular guns, right?

  0
• 

  gunnut505

  March 29, 2018 12:38

  Toad has it right; M-Pro7 (formerly MP-7) is designed and formulated to dissolve carbon.
  No smell. No mess. No elbow grease.
  Spray it on & go away.
  If the stain is really on there, a soft toothbrush will disturb the surface enough to let it soak further.
  Amazing what this stuff can do, on a myriad of surfaces!

  0
• 

  RCrosby

  April 07, 2018 11:38

  This MAY OR MAY NOT be true, but considering what may be at risk, it's worth checking out. I've never owned a nickel plated weapon but have used bottles of Hoppe's No. 9 over the years.
  Seem to recall the caution that this product will damage nickel plating. Yes?

  0
• 

  Ricci Wright

  April 07, 2018 11:46

  As far as I know Hoppe's is intended to get up under metal deposits and loosen them so they can be cleaned away. Nickel is a metal deposit I think, usually with copper underneath?? so I wouldn't leave Hoppe's on a nickel plated gun for a long period of time.

  0

Please sign in to leave a comment.