Skip to main content
Help Center Community Shop

Range report , velocity checks...

Comments

16 comments

  • kidthatsirish
    I forgot to add that I heard CCI uses a 24 inch or 18inch text barrel. I also heard once that after 19inches, a barrel slows 22 rounds down.
    0
  • Sam06
    I have heard the same thing about slowing down the bullet from drag.

    This kind of supports that:

    http://www.ballisticsbytheinch.com/22.html
    0
  • Don McManus
    General feeling seems to be that most 22lr rounds will reach maximum velocity in a 16" - 18". Anything past that will result in some frictional slowing of the projectile.

    That said, one would think the 32 grain Stinger listed would need a longer barrel to achieve maximum velocity than the 36 grain Remington.
    0
  • remingtonoaks
    That sounds about right with the 22 inch barrel. They usually test with an 18-inch barrel for 22 long rifles because that is the point where they give maximum velocity, after that friction slows them down
    0
  • SCOUT5
    Know I wonder what the velocities are out of my 27" Winchester 67A.
    0
  • SCOUT5
    quote:Originally posted by forgemonkey
    quote:Originally posted by SCOUT5
    Know I wonder what the velocities are out of my 27" Winchester 67A.



    Wanna borrow my hacksaw??? [:D][}:)]


    [:D] I reckon not, it's my go to, do everything .22, CB's to long rifle and I've killed dang near every kind of critter in the state with it.
    0
  • kidthatsirish
    Did some more testing, this time with handguns and centerfire rifles.

    If this is a thread folks would like to see updated from time to time I'll continue, however I understand there are lots of good sources out there. So let me know folks.
    0
  • SCOUT5
    If you have it, and the time and inclination to share it, it would be appreciated here.
    0
  • navc130
    Yes, always interested to see real world data.
    0
  • Mr. Perfect
    quote:Originally posted by SCOUT5
    If you have it, and the time and inclination to share it, it would be appreciated here.
    +1
    0
  • kannoneer
    I'm interested to see whatever you have tested.
    I used to have a Chrony, until my cousin blasted it with a 12 ga. slug at 7 yards. How could he shoot that low? I accused him of closing his eyes before he shot. He said he'd buy me another one....well, I am still waiting.
    0
  • kidthatsirish
    38F 80% humidity

    Federal 9mm 115grain brass cased fmj.

    5inch barrel had an AVG of 1131 fps, ES 65, Standard Deviation was 19. The advertised velocity was 1125fps. Pretty true to the box I think.

    Same ammo out of a 3inch barrel had an average of 1008fps with an ES of 41 and a SD of 14.
    0
  • kidthatsirish
    38F. 80% humidity

    Winchester whitebox, 556 NATO 55grain FMJ.

    16 inch barrel 1:9 twist

    Avg velocity was 2954 FPS. ES of 92 and SD of 26. Advertised velocity was 3250 fps. I'm guessing that was likely with a 20 inch or longer test barrel but I could be wrong.
    0
  • kidthatsirish
    38F. 80% humidity

    Federal 9mm 115 grain FMJ ALUMINIUM case.

    3inch barrel

    Avg : 998 FPS
    ES: 57
    SD : 18

    Advertised velocity was 1145 FPS ( assuming th e test barrel was likely 5 inches)
    0
  • kidthatsirish
    60F 80% humidity

    30-06 ppu 150 grain FMJ head stamp "yuu"

    Test gun was a M-1 rifle

    Avg was 2,641

    For the PPU 150 grain FMJ marked for M-1 rifle load that isnhead stamped "PPU" the average velocity was 2715fps.
    0
  • kidthatsirish
    60f 80% humidity

    30-06 Winchester power point 150 grain jacketed soft point.

    24 inch barrel with 1-10 Twist.

    Average velocity was 2882fps

    Advertised velocity was 2920fps.

    Extreme spread on this ammo was only 13fps which I thought was pretty awesome considering the velocities we saw.
    0

Please sign in to leave a comment.

Recent Activity