Skip to main content
Help Center Community Shop

9mm

Comments

12 comments

  • rong
    Hello,
    I have a bunch of 9mm 135 gr
    jrn .356 dia and I wonder if
    anyone has ever used any noses
    over .355?
    I figure to start with 3.5gr Bullseye.
    Thoughts?

    Thank you Ron
    0
  • bpost
    Hi Rong, The 9MMM will work just fine with .356 BULLETS (not noses).

    The start charge might not cycle the gun, you might have to go up a couple of tenths of a grain. If available use Unique powder, it gave me better results in the 9MM it does not build pressure so fast like Bullseye does, plus it proved to be more accurate.
    0
  • rong
    Thanks BP
    0
  • Navybat
    +1 on the Unique. I used Power Pistol for my 9mm, but it was smoky and too much flame. I switched to Unique and better results all around. 5.0 grains with a 124 grain JHP. 5.2 grains with 115 grain FMJ.
    0
  • cwinn
    Though I'm only a beginner I've had the chance to try a few combos in 9mm, and thus far Unique has also worked best for me.
    0
  • rong
    I've never tried Unique
    in a semi pistol.
    for 35 yrs I've always used
    bullseye for pistols and Unique
    for Revolvers.
    I'll give this a try.
    Thank you
    ron
    0
  • instrumentofwar
    +1 on Unique, use it in most of my pistol reloads. Love the smell too, guys at the competition know when I'm shiiting it
    0
  • fastcarsgofast
    quote:Originally posted by instrumentofwar
    +1 on Unique, use it in most of my pistol reloads. Love the smell too, guys at the competition know when I'm shiiting it
    When you are doing what?[:D]
    0
  • dcs shooters
    quote:Originally posted by instrumentofwar
    +1 on Unique, use it in most of my pistol reloads. Love the smell too, guys at the competition know when I'm shiiting it


    SHIITING Unique [?][?]
    He must be Scottish [:0][:D]
    0
  • noylj
    0.356" bullets will often be more accurate in a 9x19. You are lucky if your 9x19 barrel has a groove diameter of 0.355". It is more likely to be 0.3555-0.356", unless it is old--then your groove diameter can range all the way up to 0.362".
    0
  • Navybat
    quote:Originally posted by dcs shooters
    quote:Originally posted by instrumentofwar
    +1 on Unique, use it in most of my pistol reloads. Love the smell too, guys at the competition know when I'm shiiting it


    SHIITING Unique [?][?]
    He must be Scottish [:0][:D]

    Either way, it sounds PAINFUL.
    0
  • instrumentofwar
    DOH!

    Ya'll know what I meant, damn typo's[:p]
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?