Skip to main content
Help Center Community Shop

Covert flintlock to percussion?

Comments

3 comments

  • allen griggs
    It can be done.
    I built a flintlock with parts from Dixie Gun Works.
    I couldn't get the flintlock to work right. This was back before the days of the internet.
    I didn't know anyone who worked on flintlocks.
    I didn't know any gunsmiths who messed with muzzleloaders.
    I was getting ignition half the time, no way I was taking an erratic rifle hunting.
    So, I converted it to percussion.
    Where the touch hole is, you have to drill and tap it, then you screw in the drum and nipple.
    I bought the same model lock, from Dixie, and installed it.
    The gun worked fine.
    But, I was not happy with my amateur work on drilling and tapping that hole in the barrel.
    The drum was sloppy. I figured, it might blow out, bad news.

    So, that pretty rifle is now a wall-hanger in my parents' log cabin.

    Get that hole drilled and tapped properly and you should be ok.
    You need to make sure that you can buy a percussion lock that will fit, I imagine that the Cabelas Hawken percussion lock would work.
    0
  • hillbille
    you might be ahead to buy a second percussion barrell and new hammer then you will have the best of both![;)] and still keep the wife happy.[:D]
    0
  • Kory
    Shouldn't convert it anyway, should learn to shoot the flinter, then you can get plenty of practice and it will improve your overall shooting ability, besides that , for two hundred plus years we had flintlocks , then for about twenty years we got to deal with cappers , before they realized that cartridges were better! [:)]learn to shoot the flinter, you will be happy!! Besides that anybody can shoot a capper. Good luck
    0

Please sign in to leave a comment.

Recent Activity