Skip to main content
Help Center Community Shop

Whats the best way to clean nipples?

taylorman1949
I use these tiny holed nipples (treso) and I can hardly even see them let alone clean them. They're hard to hold with thumb and forefinger and scrub with a bronze brush, cuts me to pieces!
Anyone got any ideas?
taylorman1949
0

Comments

8 comments

Date Votes
  • eastbank
    throw cold water on them, they stand right up and you can clean them easier that way.eastbank.
    0
  • allen griggs
    I use pipecleaners.
    0
  • 44caliberkid
    I have Treso's in all my competition pistols, but I've never cleaned the flash holes. After a shoot, I remove them, let them sit in dish soap and water awhile, then brush off the external fouling with a nylon brush (like a toothbrush). I dry them with a paper towel, then blow through them. I put them in a 200 degree oven a few minutes for the final dry. Some guys blow dry the holes with compressed air, but I can envision shooting one off into some dark recess of my garage, so I don't do that.
    0
  • D1
    I always use the cleaner that look like pipe cleaners, only they have bronze bristles in amongst the fiber.


    Or just suck 'em clean. I've been know to do that, too. I woke up one time at the beach with a ring around my mouth and the girl I found lying next to me had two clean spots. Guess where?
    0
  • hillbille
    If you go to a welding supply shop, they make small round files think they call them picks, used to clean mig welders, these are perfect for the nipples. you may need to take a nipple in to get the right size, or you can buy an assortment in a carrying case, sort of like a pocket knife.
    0
  • andersk
    I must have cheap pipe cleaners ... I find that the almost always leave some fuzz in the nipple.

    Next, I plan to try paper clips.
    0
  • ken44-40
    quote:Originally posted by 44caliberkid
    I have Treso's in all my competition pistols, but I've never cleaned the flash holes. After a shoot, I remove them, let them sit in dish soap and water awhile, then brush off the external fouling with a nylon brush (like a toothbrush). I dry them with a paper towel, then blow through them. I put them in a 200 degree oven a few minutes for the final dry. Some guys blow dry the holes with compressed air, but I can envision shooting one off into some dark recess of my garage, so I don't do that.


    Pretty much the same way I do it, with the exception of the oven part.

    I dont use a nipple pick. One reason why Tresos work so well is the diameter of the flash hole. Poking anything through it could negate that advantage.
    0
  • victorj19
    When I first started shooting BP, I bought a little nipple cleaner which was nothing mor than a small drill bit crimped into a piece of round aluminum stock. Works well. You could make one by heating a drill bit and sticking the shank into a piece of round plastic stock.[:D]
    0

Please sign in to leave a comment.

Recent Activity