Tumbling loaded ammo

slinger

October 30, 2009 08:21

O.K. Call me a risk taker. I KNOW they say don't do it; experts please tell me why not. I have some lightly corroded mil surp .308. I tried steel wool and it takes alot off in seconds. I have 3998 to go. Like they got damp and there is some transfer where the cases rested against each other. Flame away.

Are they gonna blow up and extinguish the sun? Will Al Gore be mad?

0

• 

  XXCross

  October 30, 2009 09:28

  The factorys tumble all their ammo before packaging it. The catch here is that they don't tumble it very long...just long enough to get any stains or smudges off the case or bullet. Tumbling loaded ammo with the idea that you can grind away corrosion is a fools game.

  0
• 

  CapnMidnight

  October 30, 2009 11:02

  I agree with the above statement, I will sometimes tumble loaded rounds for 15 minutes to put a little more shine on them. Try steel wool, I use a Lee case trimmer, chuck it up in my drill and hit it with steel wool, it's a little labor intensive, but it works.
  W.D.

  0
• 

  slinger

  October 30, 2009 11:35

  Thank you for the answers to my iffy question.

  0
• 

  jonk

  October 30, 2009 14:01

  I've done it to clean dirt off some old milsurp ammo. If you tumble it for a long time- probably days- it could bust up the powder and mess up burn rate and pressures.
  While I don't advocate shooting overly dirty ammo, if it is just light corrosion i'd just shoot as is.

  0
• 

  mrbruce

  October 31, 2009 11:00

  The main reason to not tumble loaded ammo is the tumbling causes the powder to break down and that changes the burn... in a max load for that gun, things will get very interesting in a hurry....
  The main ammo makers state they do not tumble loaded ammo for that very reason...

  0
• 

  slinger

  October 31, 2009 11:16

  A light begins to shine. I never thought about it, but it sounds like the SHAPE of powder has alot to do with its' burning speed. not JUST the formulas' percentages? This is prolly in everybody's knowledge base, but has eluded mine. If I'm right in this, thanks again!

  0
• 

  sigarmsp226

  October 31, 2009 16:24

  Slinger - Glad you asked the question. I just learned me something from your thread that I did not know. Thanks guys - Mark

  0
• 

  jeffjmr

  November 05, 2009 17:10

  Nevr-dull is the ticket for polishing loaded ammo, and just about anything else made of metal. But it is particularly effective on brass and copper.
  
  Available at Wal-Mart and hardware stores. It is a fiber wadding impregnated with a special metal polish and comes in a can. Smells nasty but works like a charm.
  
  Cheers,
  Jeff[;)]

  0

Please sign in to leave a comment.