44 Remington Magnum
What is the hottest (yet still safe) load you got for a 44 Mag shooting a 310 grain cast lead bullet, w/gas check?
0
-
You could e-mail oregon trail as they list a 310 wnfp gas checked under their trueshot line or check taffin test as there is a load for a ssk 310 but I do not know if its gas checked. A few words I found people are slow to respond to. hottest safe and witness was another heh heh heh heh 0 -
About 1200-1250fps. max.
WHERE THE HELL IS YOUR LOADING MANUAL [?][?][?][V][xx(]
YOU ASK FOR INFO, THEN PUT UP SMART ASS REMARKS [:(!][:0][xx(]
HEH HEH HEH HEH !!!!!!!!!0 -
quote:Originally posted by cash777
You could e-mail oregon trail as they list a 310 wnfp gas checked under their trueshot line or check taffin test as there is a load for a ssk 310 but I do not know if its gas checked. A few words I found people are slow to respond to. hottest safe and witness was another heh heh heh heh
You're scarey. [}:)][;)][:)]0 -
quote:Originally posted by dcs shooters
About 1200-1250fps. max.
WAIT, while I get a pencil and paper to jot down all this info. [;)][:D]0 -
Well, the weight is not 310, but Buffalo Bore lists a 305 grain at 1325 fps, and a (Good LORD!) +P+ 44 Mag that is 340 grains, at 1478 fps. 0 -
OK, the mold I have is a Lee 310 grain FN gas checked. I'm looking for a good, strong hunting load to put behind it. Another bullet weight is not an option, right now. 0 -
quote:Originally posted by dcs shooters
About 1200-1250fps. max.
WHERE THE HELL IS YOUR LOADING MANUAL [?][?][?][V][xx(]
YOU ASK FOR INFO, THEN PUT UP SMART ASS REMARKS [:(!][:0][xx(]
HEH HEH HEH HEH !!!!!!!!!
That's only because, you posted useless info and you knew it. All 5 of my manuals are near my reloading desk. Where's yours? [?][?][?]0 -
I didn't want to be scarry but I don't load the 310 grain you could go to Hodgdons free sight they don,t list 310 but they have above and below---while your there read there Mission statement on the home page 0 -
YOU ASKED FOR A HOT LOAD FOR A BULLET WEIGHT. I GAVE YOU THE MAX FPS FOR THE WEIGHT YOU ASKED FOR. IT IS UP TO YOU TO FIGURE THE POWDER TO USE TO MAKE THIS.
IF YOU CAN'T FIGURE THIS OUT, YOU HAVE NO BUSINESS RELOADING [:0][V]
I'VE ONLY BEEN LOADING 44MAG FOR ABOUT 35YRS. AND HAVE ABOUT 20 MANUALS WITH IT LISTED [:0]0 -
you forgot the most important part of your info request!!!! WHAT BRAND OF GUN ARE YOU SHOOTING because what I shoot in my Ruger will kill your smith or colt if you know what I mean personally I shoot a 250gr Keith bullet Its all you need at about 1300fps 0 -
quote:Originally posted by dcs shooters
YOU ASKED FOR A HOT LOAD FOR A BULLET WEIGHT. I GAVE YOU THE MAX FPS FOR THE WEIGHT YOU ASKED FOR. IT IS UP TO YOU TO FIGURE THE POWDER TO USE TO MAKE THIS.
IF YOU CAN'T FIGURE THIS OUT, YOU HAVE NO BUSINESS RELOADING [:0][V]
I'VE ONLY BEEN LOADING 44MAG FOR ABOUT 35YRS. AND HAVE ABOUT 20 MANUALS WITH IT LISTED [:0]
I wanted to see if anyone had a load that was significantly different than what is in my books. They're not. You were about as useful as tits on a boar pig. Please don't respond to any future load requests from me. I have determined that you are a self-centered, stuffed shirt, conceited, jerk. [:(!][V][:X]0 -
please re-read the posting guidelines before a post that could be beneficial, goes bye-bye. 0 -
quote:Originally posted by darksider
you forgot the most important part of your info request!!!! WHAT BRAND OF GUN ARE YOU SHOOTING because what I shoot in my Ruger will kill your smith or colt if you know what I mean personally I shoot a 250gr Keith bullet Its all you need at about 1300fps
This ammo will be fired from a Ruger Super Redhawk.0
Please sign in to leave a comment.
Comments
13 comments