WW 230 P powder

Radar

February 11, 2009 18:14

I cant seem to find much data for using the Winchester 230 P powder,is it by chance the same as 231 ? Anybody have data for it ?

0

• 

  Pearyw

  February 12, 2009 12:37

  I have it listed in a 1974 Speer manual. Data seems to be close to Bullseye.

  0
• 

  Radar

  February 12, 2009 17:13

  Thanks,Now im looking for a Speer Manual.

  0
• 

  Rocky Raab

  February 13, 2009 04:44

  What are you loading? I have a shelf full of old manuals - and a half can of W230P!
  
  For those who have never seen any, W230P is the most unusual-looking powder I've seen yet. It looks a lot like shredded aluminum foil. VERY strange stuff.

  0
• 

  Radar

  February 13, 2009 17:35

  Thanks Rocky,It will probley just be 38 spl. and 45 Acp .

  0
• 

  Rocky Raab

  February 14, 2009 06:03

  Okay. Hornady Vol II (1973) shows W230 in the 38 Special with 158 JHP bullets with a start charge of 4.2 (750 fps) to 5.0 (900 fps). Both are only one tenth grain heavier than loads for Bullseye, giving the same speeds. That would indicate a burn rate nearly identical to Bullseye.
  
  In 45 ACP, they list only 185-grain jacketed bullets. Loads start at 4.7 (700 fps) through 6.2 (1000 fps!). Again, these are very near Bullseye charges giving the same speeds.
  
  For my own use, I use Bullseye data for 230P, always beginning with Start charges and usually not going all the way to maximums, just to be sure. I've loaded it in five or six cartridges with no ill effects noted to date. When it's gone I won't miss it, though.

  0
• 

  Radar

  February 14, 2009 16:34

  Thanks Rocky,I know it dont flow good but why wont you miss it ?

  0
• 

  Rocky Raab

  February 15, 2009 05:27

  Because there are about 35 powders that do the same thing better (including 231) without the problems that caused WW to discontinue 230 in the first place - whatever those were.

  0

Please sign in to leave a comment.