looking for .270 win hornady 130gr loads

speedbuggy16v

February 07, 2009 19:13

I am looking for load data for .270 win with hornady 130 grain SST bullets, preferably using H4895 or IMR4064, I know neither powder are the "ideals" but thats what I have
thanks
Corey

0

• 

  RCrosby

  February 09, 2009 01:16

  I always load my .270 with 4831 so can't offer a specific recommendation for your powders except for the standard that should always apply anyway; check several manuals, start low and work up slow. Over the years I've run into several instances where a load that was well under max in one rifle nearly took the shingles off roof in another. Hasn't happened often, but often enough to keep me honest and humble.

  0
• 

  wsm 325

  February 09, 2009 04:01

  hi jus opened the hornady reload book and they suggest, IMR 4064-41.6 43.4 45.1 46.8 and the max being 48.6. they didnt test the h4895.nosler also didnt test the H4895. hope this helps, good luck

  0
• 

  speedbuggy16v

  February 10, 2009 20:13

  thanks to all that replied now if I can figure out OAL I will give it a shot, might have to go buy some new powder though, oh well, just gives me more options...
  I think I just put a new monkey on my back if you ask me.
  Corey

  0
• 

  mbsams

  February 11, 2009 05:00

  57 gr of H4831 - it was good enough for Jack O'

  0
• 

  JustC

  February 11, 2009 07:41

  58gr H4831sc will be quite pleasing with a 130gr pill and CCI primer

  0

Please sign in to leave a comment.