Primer Pocket swager

brickmaster1248

January 27, 2009 10:48

I just bought one of these used and it didnt come with any directions on how to set it up. I was hoping one you fine fellows could help me with the setup of this rig. Please, Im not interested on what other means of crimp removal you may use but only wanting to know how to use this tool.

0

• 

  brickmaster1248

  January 27, 2009 10:48

  I bet you dont toss that military stuff anymore.
  
  What do you use?
  
  
  
  
  
  With brass thru the roof
  I am going to add another stage....
  better late than never.
  
  Broke down and finaly ordered the RCBS brand.
  
  Matches the Chucker [:D]
  
  
  
  Midway had it listed as discontinued by MFG. What?
  
  
  
  Looking forward to the cherry one owner Lake City brass. [:p]
  
  
  Just months ago
  I passed on a 55 gallon drum full of once fired military
  5.56 "the min order" because I was too lazy for the extra stage.
  
  Yesterday at the local range
  I hand picked 200 pieces for $50.
  
  I hope my dad kicks my ___
  
  On the upside,
  I am tweaking on some nice groups
  and saving the best brass
  for last.[;)]
  IMO

  0
• 

  BHAVIN

  January 27, 2009 11:04

  What tool did you buy? RCBS, Dillon?

  0
• 

  Nwcid

  January 27, 2009 11:12

  Like it was said several different ones. What one?

  0
• 

  brickmaster1248

  January 27, 2009 11:19

  Im sorry guys, It is the RCBS.

  0
• 

  jonk

  January 27, 2009 12:26

  Insert the proper sized teat into the press where the shellholder goes, large or small. Put the cup shaped thing over it so the flat side is up. As you raise the ram the teat will poke through. Screw the die with the proper size punch (again large or small) in and hold the case in place on top of the teat. Slowly raise the case until it is inside the die. You want to feel the case crush between the teat and the bottom of the punch in the die body. You'll see the teat go in to the step; reaming is complete. Now bring the handle down sharply and it will dislodge the swaged case from the teat.

  0
• 

  peabo

  January 27, 2009 12:39

  Hopefully you can use these pictures of instructions that came with mine.
  Hopefully you got both rods, one for the .223 and one for the larger cases. The large rod will not work with the .223.
  
  As you can see from the price list, this is a very old one.
  
  
  
  
  
  
  
  
  
  
  
  Thanks---Peabo

  0
• 

  brickmaster1248

  January 27, 2009 13:03

  Thanks guys you have been alot of help.

  0

Please sign in to leave a comment.