Skip to main content
Thank you for your patience as we work through our high volume of requests. If you need assistance with 2FA, please provide the correct phone number in your ticket request so we can assist quicker.
Help Center Community Shop

.300 W/M vs .300 RUM

Comments

9 comments

  • Tailgunner1954
    The WM is to the 30-06, as the RUM is to the Win Mag.
    0
  • navymm
    Ballistically speaking, I can agree to that. And I shouldn't admit this for fear of serious recriminations, but I've never cared for the -06. Wouldn't own a 30-06 if it was given to me. :)
    0
  • Tailgunner1954
    The 06 is a kinda boring cartridge, not the best at anything but more than capable of anything.[:D]
    The only reason I moved up (from the 30-06 to the 300 Tomahawk/300 Rum Improved) is that I just didn't trust it for deer past 440yd (inside of that I have no qualms with it) [8D]
    0
  • CryptoChief
    One thing to think about: optimum 30 cal velocities run between 2950 and 3100 fps for the best harmonics and accuracy. With the ultra mag and the heavier bullets you should be ok. Go lighter than 190 and trying to push past the 3100 mark and you might not be able to dial in on the harmonics as well, if ever. I would imagine you would be shooting 190 or heavier, probably even as high as 240. But don't get caught up in the ultra high velocity craze. For some calibers it works fine but for the 30 cal, the above velocity range is the optimum place to start.
    0
  • Permanently deleted user
    Did you check out the .338 RUM....awesome long range caliber.
    0
  • mudd_bogger
    have you given any thought to the 30-378 weatherby i have had good luck with it doin the 1000yd bench rest with 220 grain match kings.
    0
  • DENWA
    300 RUM
    30-378 Weatherby

    338 RUM
    338 Lapua

    All very capable and Equally impressive.

    Just don't forget 1000yd match winners are still shooting 300 Win Mag.
    0
  • dcloco
    For something different, skip the 30 cals. The 30's feature expensive brass and expensive bullets (so do the 338's).

    Considered a 6.5x06 AI or a 6.5x55 AI???

    At least use 140/142 bullets and try to find some 155/160 grain bullets. If you can find the heavier bullets, your BC and knockdown power will rival the 30 cals and top more than half of the field.
    0
  • sandwarrior
    navymm,

    I have come to new appreciations of magnums as of late. But even still the '06 is a very hard to beat standard. With modern high BC bullets the '06 will hold it's own in just about any .30 cal competition. It holds more powder and can push much heavier bullets to competitive velocities that the .308 won't. Bullet efficiency is the key. Not so much magnum velocities. Not to mention the '06 will do well in competitions without knocking you back into Sunday. At least that mostly holds true for rifles without muzzle brakes. Magnums have a tendency to make even the best shooters not want to shoot them. One wrong hold and the shooter second guesses for a while if his hold is going to allow recoil to ruin his day...or at least the next few minutes that a good hold will make a difference.

    Personally I would look at finding the most efficient bullets instead of just a bigger cartridge.

    As to the WSM, I think you would be hard pressed to find many more accurate cartridges right out of the shoot. With a little less powder than the .300 WM it works well with 190-200 gr. bullets. The reduced powder load helps extend the short barrel life that so many magnums are guilty of burning through when used in competition.
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?