Skip to main content
Help Center Community Shop

Critique my first purchase.....

Rack Ops
As I've mentioned before, I'm getting into reloading. I saw this kit on another thread, looks like a good deal.

LEE RELOADING PRODUCTS BREECH LOCK CHALLENGER KIT (W/ BREECH LOCK CHALLENGER PRESS) $89.99

http://www.midsouthshooterssupply.com/item.asp?sku=0000690030


"ABC's of Reloading" recommends a turret-style press, and I've seen mixed reviews of the challenger press, particularly when loading larger cases (I'll be loading a lot of 30-06) so I thought I'd pick this up on the side

LEE RELOADING PRODUCTS CLASSIC 4-HOLE TURRET PRESS $90.97
http://www.midsouthshooterssupply.com/item.asp?sku=0000690064.


Finally, I'm guessing I need one of these kits for every type of round I load

LEE RELOADING PRODUCTS CLASSIC LEE LOADER 30/06 SPRINGFIELD $16.00
http://www.midsouthshooterssupply.com/item.asp?sku=0000690248


What else do I need?
0

Comments

11 comments

Date Votes
  • dcs shooters
    I would start with the Challenger and get dies for the '06, and other calibers you load for. You can always upgrade to a turret press later. You don't need the Classic Lee Loader unless you want to use a plastic mallet to load with it.
    0
  • bobski
    face it, with time, your room will look like this, with all the different dies for different bullets. just surrender to the idea now.[:p]
    144-4434_IMG.jpg
    0
  • Mort4570
    case lube,calipers.dial type is fine...scale,safety glasses,bullet puller for misteaks,case trimmer,.

    I'd go with as sturdy a press..read cast iron...as you can afford since rifle ammo is your prime directive.I started with a Challenger and it's ok,but there are better ones,even from Lee.
    0
  • ChetStafford
    Rack ops,

    Take a look at these this link is for Midway but I am sure that Midsouth sells this kit also

    http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=646599&t=11082005
    0
  • goldeneagle76
    I have the classic 4-hole turret. I like it alot but there are better presses out there. I have loaded 45ACP, 44mag and 50AE on it with no problem. I just fell into a great deal on a RCBS JrII and 2 Herters single stage presses that look like they would handle 50bmg with one finger. Will be setting them up this weekend along side the turret.
    0
  • Rack Ops
    Its too bad that Lee doesn't allow a substitution in the Anniverary Challenger kit...
    0
  • greystone
    I've loaded quite a few 243 and 204 on the challenger press but the Classic is cast iron and a sturdier unit. What you need to load each and every caliber is a set of dies for that caliber. Here's an example but there are alot of different brands ant types.

    http://www.midsouthshooterssupply.com/item.asp?sku=0000690508
    0
  • Rack Ops
    I thought the bottom link I posted was the dies.....

    What the hell is it?
    0
  • goldeneagle76
    quote:Originally posted by Rack Ops
    I thought the bottom link I posted was the dies.....

    What the hell is it?


    that is a handheld loader...Old School style[:D]
    0
  • Rack Ops
    ohhhhh.......

    I thought it was odd that it was located in the "presses" section. Does anyone actually use those?
    0
  • greystone
    Does anyone use those? Years ago when I was a kid I used to sit at a picnic table and pound together some 38 Specials. They do work but thats about it. Haven't used one since. Dave
    0

Please sign in to leave a comment.

Recent Activity