lee shell holder

brickmaster1248

March 05, 2008 17:06

will Lee shell holders work in my rcbs press and my rcbs priming tool?

0

• 

  peppersac

  March 05, 2008 17:11

  Yes they should.

  0
• 

  brickmaster1248

  March 05, 2008 18:14

  are you sure? ineed someone who has already used them to know for surequote:Originally posted by peppersac
  Yes they should.

  0
• 

  dcs shooters

  March 05, 2008 18:42

  Yes, they sure will.

  0
• 

  PA Shootist

  March 06, 2008 03:56

  Please just be aware, there are commonly available two types of Lee shellholders. The "standard" ones will interchange with RCBS, Lyman etc. standard shellholders. Then there are the shell holders used for the Autoprime tool, commonly seen and sold in sets. These are different, much thinner, and will not interchange. I have both kinds myself.

  0
• 

  Odawgp

  March 06, 2008 07:47

  quote:Originally posted by PA Shootist
  Please just be aware, there are commonly available two types of Lee shellholders. The "standard" ones will interchange with RCBS, Lyman etc. standard shellholders. Then there are the shell holders used for the Autoprime tool, commonly seen and sold in sets. These are different, much thinner, and will not interchange. I have both kinds myself.
  
  
  this is correct
  
  the lee auto prime shell holders are disk like and don't have the farel on the bottom to lock them into the press ram.
  
  If your using a RCBS priming tool the lee shell holders will be a little tuff to get into the tool but will work fine.

  0
• 

  CHEVELLE427

  March 06, 2008 16:48

  you might find one that is a little tight sometimes, the one i got that was tight was a rcbs and was tight in a rcbs press[:(]

  0
• 

  brickmaster1248

  March 06, 2008 16:57

  thanks for the info guys im going to order my Lee shell holder kit tomorrow. seems to be cheaper that way!

  0

Please sign in to leave a comment.