static electricity safety

shootuadeal

January 27, 2008 15:17

this may be a stupid question but the dry and cold weather up here has got it so i dont like to touch anything in the house because i get such a bad shock off of it. is there any danger as to one of those shocks setting off my powder, like when i am adding more to the hopper or something of that sort. i dont know if a static spark would be enough to set it off or not. any experts out there know anything about this.

0

• 

  JustC

  January 27, 2008 15:45

  it is recommended to keep your bench OFF of any carpet. Wear shoes when loading, and rub things with a fabric softener sheet (they are anti static)

  0
• 

  dtknowles

  January 27, 2008 17:50

  Touch something metal to discharge yourself prior to handling powder or flamable liquids. Take the shock like a man, it is much less painful that the burn from powder or gasoline.
  
  Tim

  0
• 

  sandwarrior

  January 28, 2008 05:06

  shootuadeal,
  
  Ground yourself to whatever you are pouring into. Meaning hold the powder measure while pouring into it with the opposite hand. If it gets really bad then I recommend making a conductive chord(bonding strap) and ground yourself to your bench. You can't tie it to your hand as you will be knocking stuff over constantly, but you can tie it to your leg or something.

  0
• 

  scrubberguy

  January 28, 2008 16:27

  shootuadeal:
  Guys who repair computers learned long ago that a small static shock could wipe a whole memory system!
  
  Any good electronics store should be able to get you a static table. This will have one or more cuffs or other attachments that will ground you during your reloading session. However you may have to get creative in how you connect yourself to the grounding board so your not knocking everything over!
  
  Good Luck[8D]

  0

Please sign in to leave a comment.