bullseye loads for 357

ddhotbot

January 23, 2008 08:08

looking for a good target load with bullseye and 158 lswc bullets. also a target load for my 45acp using 230gr lrn bullets and bullseye or unique powder.thanks

0

• 

  leadburner

  January 23, 2008 09:08

  Hey,dd,These loads are off Alliants website.OAL 1.58,primer,Fed. 200, Bullseye 6.5 grns., 1,320 FPS., 33,900 PSI,for the 357,OAL 1.19,primer,Fed. 150,Bullseye 4grns.,810 FPS 13,900 PSI,for the 45 acp.Here's the web adress,www.alliantpowder.com.Pretty good site,check it out.

  0
• 

  bpost

  January 23, 2008 09:57

  Same load for both. 6.O grains of Unique.
  
  I've shot literally 80-100,000 rounds loaded with that load.

  0
• 

  44shotdoctor

  January 24, 2008 07:44

  Wow, Bulleye has to be on of best powders for these guns. I use in my 357 is 6.7g with laser cast 158g for 1100pfs. This is a tack driver round. For the 45acp I shoot 5g with laser cast 230g for 900fps. I choose a lighter load for the 45 as it's intent was to be a slow moving gut tearing round. And you still get the satisfaction of power plus no lead leftovers to clean out. Anything over 1000fps is a waste in these type of gun. For these 2 guns this is my favorite powder by far.

  0
• 

  Hawk Carse

  January 24, 2008 12:18

  Do be careful loading Bullseye or other fast powder in .357 or other large cases. 4.5 gr B.E. is a good target load in .357 brass. Nine grains will demolish a good gun.

  0
• 

  CapnMidnight

  January 28, 2008 19:22

  I,ve loaded 5gr Bullseye in my 45acp for years, shot thousands of rounds. You can load alot of rounds out of a pound.
  For what it's worth.
  W.D.

  0

Please sign in to leave a comment.