remington peters 6 point 20ga load needed

bobski

September 06, 2007 14:28

i was given a bunch of 6 point field load peters 20ga yellow hulls. the fellow tells me they are reloadable. i dont have any data on them. got any loads using 20ga WAA-20 wads and say, 7625 or unique powder? i need to get it to 1200fps for skeet. thanks!

0

• 

  788-308

  September 07, 2007 07:14

  Check out the Alliant Powder site. Look for data for use with Rem-Peters Unibody Shells. Use which ever primer is listed in the combination. DO NOT SUBSTITUTE primers or hulls. Look at the sporting goods Box stores. They should have freebie reloading manuals. Lyman has an excellent shotshell reloading manual.

  0
• 

  bobski

  September 07, 2007 07:45

  has the unibody remained the same all these years? im assuming the data on this unibody hull has been around for a while?
  these hulls are once fired relativley new.

  0
• 

  temblor

  September 10, 2007 20:05

  Are they 2 3/4" ? Looks like low brass in the picture.
  How much payload. Both powders you mentioned are listed for 7/8oz loads with good velocity.
  Which primer?
  Lymans #4 manual lists these:
  20ga 2 3/4" Remington Unibody SP Plastic Cases w/6 fold crimp but they are high brass and ribbed body.
  With these they list:
  14.0gr Unique, Win. 209 primer, Win. WAA20 wad for 1162fps at 11,300psi.
  or
  17.0gr SR7625, Win. 209 primer, Win. WAA20 wad for 1219fps at 11600psi.

  0
• 

  br549

  September 12, 2007 12:57

  6 fold and 8 fold crimp uses the same data.

  0

Please sign in to leave a comment.