Which dies to choose?
I recently decided to get into reloading. I bought a Lyman turret press kit. I'm starting with .40 and .308. I see many dies on the market (Lee/Lyman/Hornady, etc.) They all have compatible threading. Some sets come with the appropriate shell holder. This is helpful because I have none. Which die set to choose?
0
-
For the 40, go with the Lee Carbide Pistol Set, none better. 0 -
If you are loading for a 308 bolt gun go with Lee collet dies. If you need to bump the shoulder back you can always get a full length sizer later. 0 -
I agree with cubslover on the pistol dies. However, I prefer Hornady rifle dies. The reason is two-fold. First, is the sliding bullet aligner. It hangs out of the die and slides up while holding the bullet in alignment. This allows for the seating of non-boattail bullets without having to hold the bullet until it is all the way into the die. Second, is the tapered expander.
One of the biggest downers with Hornadys used to be the fact that they used a collet to hold the spindle in the die and they had a tendency to slip. Now that they have the "Zip Spindle" which is threaded it removes that problem.0 -
for the .308, I plan to reload for a bolt gun at first. I then plan to reload for a semi-auto (M1A SOCOM). SA does not recommend reloading for semi's, I believe it may even void any warranty. Is it still safe to do if done correctly? Is a certain manufactorer preferred for both bolt and semi use?
Thanks for the helpful info so far.0 -
Which dies you use shouldn't matter whether it is for a bolt gun or a semi. The reason that SA tells you not to use reloads is that most reloading manuals give data using slower powders which gives you a pressure curve which is detrimental to the firearm. It will end up causing damage to the operating rod. There are a couple of threads around that discuss this in detail. You can reload for the M1A, but you have to do it correctly. 0 -
Hey, I'm new here but have been reloading for years. In most instances you can find out what powders the military used for their rounds, this will help you more closely duplicate the standard pressures of the round. To echo the last post above, yes it can be done if done correctly. Happy loading, it's a lot of fun and pretty darn rewarding. 0
Please sign in to leave a comment.
Comments
6 comments