What equpment should I get next????
So far I have been lucky. Shooting a used Bullberry barrel in 6BR on my Encore I have gotten in the low 2's with Berger 80 grain bullets and Varget. My new project is still in the works. An XP 100 action reworked Remington trigger 6BR 8 twist heavy barrel 269 neck.
This is my equipment list;
RCBS BIG MAX reloading press
Redding neck bushing sizing die with the correct bushing.
Redding FL size die ans standard bullet seater
RCBS 1500 Dispenser/scale Combo
RCBS priming tools
K&M neck turning gear with carbide cutters and doughnut removal cutters.
If there was a list of equipment I could get to help improve accuracy what would you get.
This is my equipment list;
RCBS BIG MAX reloading press
Redding neck bushing sizing die with the correct bushing.
Redding FL size die ans standard bullet seater
RCBS 1500 Dispenser/scale Combo
RCBS priming tools
K&M neck turning gear with carbide cutters and doughnut removal cutters.
If there was a list of equipment I could get to help improve accuracy what would you get.
0
-
You might pick up a concentricity gauge...Several out there. The idea being to place the cartidge in 'v' blocks with a dial indicator..turning the case allows you to check bullet run-out, ect...
The Encore/Contendor allows one to sat the bullet into the lands...which mitigates somewhat the out of alignment problem, of course.
Course..there is a Junke bullet spinner....[:D]
You are shooting better then most already...perhaps it is time to relax and enjoy it ?0 -
Sinclair neck thickness micrometer
K&M arbor press and wilson dies in 6BR or have a set of the Newlon Precision blanks cut with your chamber reamer.0
Please sign in to leave a comment.
Comments
2 comments