Need advice - Thinking about getting into reloadin

meunke

May 18, 2007 05:48

Anyone have some suggestions on a good book for a beginner to read before he takes the plunge into reloading?

I've always been interested in it, no more so since I've acquired a K-31 and an Enfield.

0

• 

  Pearyw

  May 18, 2007 06:19

  Get the Lyman Reloading Handbook. it will answer all of your questions and give you a wide list of reloading data including lead bullet loading which I what I use the most in my Enfield and Swiss 7.5.

  0
• 

  franksremote

  May 18, 2007 08:06

  ABCs of Reloading

  0
• 

  gravley

  May 20, 2007 13:00

  Modern Reloading by Richard Lee

  0
• 

  gotstolefrom

  May 21, 2007 09:18

  All of the references are Good, but regardless of which you use first, read it twice (at least). Every step is important to a good load.
  
  Reloading has done more to improve my bullseyes than breaking bad habits. I've used the same press for almost 30 years. The same press is still sold today, along with MANY others.
  
  I know you need to load for the rifles mentioned, but if you can, load straight wall (pistol) cases first. After you have read your manual twice, you will know why.
  
  Take care when you load, don't 'multi-task'. Don't get in a hurry. Document your work. Keep your brass in 'lots' so you know it's history.
  
  Don't get on the progressive press bandwagon. A mistake for startups with enough cash. I don't own a progressive press, but a friend does. He still uses his 'single stage' press 75% of the TIME.
  
  In developing a load, a single stage press is the machine to use. Once you find that 'sweet load' that your gun likes, you can use a progressive loader to spit out 500 rounds for you. In that operation, they are golden machines. Fortunately, since he has one, I don't need one.[:D]
  
  See tombiasi's post here. Excellent stuff there.
  
  ENJOY !!

  0
• 

  sandwarrior

  May 21, 2007 23:27

  meunke,
  
  I personally prefer Sierra or Hornady. While their books are oriented to their bullets they both give a lot of great information. I know you know, but just to remind you, read all the steps. If you can have someone along with you when you start who has done it before. It always helps when a step is shown that may look complicated by explaining it on paper.

  0
• 

  fire for effect

  May 27, 2007 15:47

  Contact the NRA and an NRA Certified Reloading Instructor, to get the NRA's Reloading Course Manual.

  0
• 

  SteveWag

  May 27, 2007 18:16

  I agree with "gotstolefrom", start with a single stage press. I would suggest an RCBS Master Kit, but don't pay more than $275, the wholesale price today is $232.82. Lyman and Lee presses are OK if you know the ones to buy. Dillon and Hornady are very good but no better. There is a reloading book in the RCBS kit. You can check out my site:
  
  http://www.gswagner.com/bigreloading/reloadingindex.html
  
  Then, check out the things not included in the standard books;
  
  http://www272.pair.com/stevewag/reloading/reloading1.html
  
  Good Luck
  
  Steve Wagner

  0

Please sign in to leave a comment.