Skip to main content
Help Center Community Shop

30-30 load data for bolt guns

Comments

7 comments

  • Tailgunner1954
    IIRC Nosler (and maybe others) has data for the 30-30 in pistol barrels (IE TC Contender). Lacking that, start with same bullet weight data and work up from the starting loads.
    0
  • Wulfmann
    There is sometimes a desire to kick up a 30/30 load because it is in a stronger action but be advised it is still a weak case one of the very first smokeless cases designed so work up that load from a safe one and watch for signs.
    My .02

    Wulfmann
    0
  • dtknowles
    Wulfmann, why do you think the 30-30 case is weak? The ones I have sectioned seem to be as robust as any other modern case.

    Tim
    0
  • Wulfmann
    Speer reloading manual Page 256:

    "We are occasionally asked if the 30-30 can be loaded to higher velocities in a modern bolt action like the Remington 788.
    The answer is NO!
    The 30-30 case is an old design with relatively thin walls. Attempting to load "hotter" would risk dangerous case failure."

    I have never tried to find out how far one can push that envelope as this seems like pretty definitive advice.
    Mind you, I am known for searching new loads where others dare not go but this is one I have taken to be good advice.

    Wulfmann
    0
  • dtknowles
    Wulfmann, thanks for the reference

    Tim
    0
  • 11b6r
    From the Speer manual- for 30-30.
    "Many who reload 30-30 have wondered why higher velocity loads cannot be used in modern strong bolt actions. The 30-30 case is relatively thin and not particularly strong. Higher pressures could lead to case head failure which can wreck even a very strong rifle." AND- "However, spitzer bullets over 150 grains are not reccomended. Pointed types are designed for velocities higher than the 30-30 can deliver. Thus they may not give acceptable expansion on game because of the stronger jacket." The above may explain the shortage of load data. Sorry-
    0
  • Tailgunner1954
    Depends on the spitzer. The Nosler BT in both 125 & 150gr have a velocity threshold for expansion that's on the lowside of 1700fps.
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?