Max. Lenght

7.62x39

July 26, 2006 15:38

I bought some new bullets today, what would be the max. lenght for these; here they are...

First Gun:
Savage model 11
.308

Load:
165 grain soft point Speer flat base bullets
47 grains of H-380
CCI Large rifle primer
Remington case

What would be the max. length of the loads?
Thankyou

0

• 

  Tailgunner1954

  July 26, 2006 17:52

  Thumb rules: Minimum of 1 bullet diameter inside the neck, and at least .030 shorter than the max mag length (unless your planning to use it as a single shot).
  Speer tested that bullet at a OAL of 2.800, SAMMI max OAL for the 308Win is 2.810

  0
• 

  7.62x39

  July 27, 2006 13:30

  I was just worried about having the bullet seated to low in the case, therfore causing pressure problems. so did I get it right.

  0
• 

  Tailgunner1954

  August 07, 2006 07:36

  quote:Originally posted by 7.62x39
  I was just worried about having the bullet seated to low in the case, therfore causing pressure problems. so did I get it right.
  
  
  I don't know, as you haven't mentioned what you set your OAL at.
  If you haven't already done so, you need to pick up a loading manual or 2 (esp the one for the brand of bullet your going to use). Bullet construction and design are 2 major variables in pressure, the manfacture of your bullet is going to provide the best data for that bullet.
  IIRC I have something like 12 loading manuals plus a couple of software programs and access to a couple more manuals, available to me to select receipies from.

  0

Please sign in to leave a comment.