22-250 loads with 55gr Nosler BT bullets
I have a Remington 700 varmint rifle with a 26" heavy barrel. I would like to use 55gr Nosler BT and Varget powder but am open to other powders such as H380. Does anyone have any "pet" loads that they would like to share? I am going to be working up some test loads this weekend and I thought I would get opinions. I will take care of the OAL, brass prep and will verify load advice with my load manuals as I know these are all important factors. Thank you.
0
-
38.3 of IMR 4350 was pretty impressive for me with that bullet. H380 was OK but did not give results as repeatable as the 4350. I used a load 2 grains lower than listed on the jug to start. 0 -
Thanks bpost. Anybody else? 0 -
H-4350 will do very well in the 22/250 and AA2460 is another great powder for the 22/250.
My 22/250 AI likes 37.5 grains of H-4350 and the 75gr Amax but it has a 1 in 9 twist.0 -
Thanks mrbruce. I will be trying IMR 4350. Anybody using VARGET? 0 -
I use varget in my .22-250, but i use the 50 grain nosler bt. I back off of the max load 2 grains to 34 grains even. my 250 seems to love it. 0 -
38.0-38.5gr H380, cci LR primer, win brass. 0 -
-I will be trying IMR 4350.-
I tried IMR 4350 in my 22-250 many years ago. It shot well but it was a nuisance to get through that little 22 caliber neck. I went to H380 & never looked back.0 -
Has anyone tried AA2700 in the 22-250? 0 -
Thanks guys. I will start loading tomorrow. Anybody else using VARGET? Thanks. 0 -
I use varget for serveral calibers and love its results 0 -
22-250 Remington
Standard 1-14" twist ( Remington Factory Varmit Rifle )
55 gr Nosler B.T.
Winchester Case
Winchester L.R. Primer
H. Varget Powder: Start around 33.6 GR and shoot groups working up .2 tenths of a grain at a time to a maximum load of 35.0 grs ( max. load listed in Nosler #5 Manual ).
Most of them will shoot well in this range in my experience ( although the one I've been shooting lately likes 50 gr. Hornady V-Max. bullets better )with several rifles. Sometimes they will shoot well with a hotter load but your gun may not. Just watch for pressure signs as you go up. Your mileage may vary.
Good Luck............[8D]0 -
IMR 4320 worked great in mine after getting the length adjusted in was a tack driver. 0 -
quote:Originally posted by BHAVIN
Thanks guys. I will start loading tomorrow. Anybody else using VARGET? Thanks.
I use 35.5 gr Varget to push a 55-gr Nosler Bt/Bt with really good results. I've got some V-Max 55-grainers, but I haven't loaded them for years. I'll get 'em out, dust 'em off and see how they compare to the boattails I've been using.0 -
I use 34 gr of IMR4895 in my Savage HB and 50gr VMAX. It will cut 1 hole at 100 yards 0 -
35.5 of H380, Rem mag. primer. works great out of my Rem 40x 0
Please sign in to leave a comment.
Comments
15 comments