Dented cases

ChetStafford

May 03, 2006 18:46

I have some cases slightly dented just below the shoulder[:(!] Are they o.k. to use? guess I got to much lube on them. or maybe i had the die set up wrong? but 16 out of 20 came out with no dents or anything. thanks

0

• 

  PJ

  May 03, 2006 18:55

  Too much lube on the shoulder. Not a problem, the dents will come out on the first firing.
  Pete

  0
• 

  bgjohn

  May 04, 2006 05:12

  50,000 psi will straighten them right out.
  JM[;)]

  0
• 

  mrbruce

  May 04, 2006 08:09

  That would depend on how hot they were loaded.
  The same amout of powder in a smaller place is not a good thing.
  Don't expect them to go in the same place the ones without dent's went......

  0
• 

  JustC

  May 04, 2006 08:20

  fire em straight, and use LESS lube next time.

  0
• 

  dcloco

  May 04, 2006 13:11

  Try some Imperial sizing wax or Hornady sizing wax...both work excellent.
  
  Have tried the roll on pad & OneShot....but did not like either.
  
  Simply touch either of the waxes mentioned, twirl the case, and you are done.

  0
• 

  ChetStafford

  May 04, 2006 17:57

  Thanks guys I figured that they would straighten out when fired but it never hurts to ask[;)]

  0

Please sign in to leave a comment.