38 super loads

haroldchrismeyer

July 04, 2005 14:03

New to reloading and trying to find load for my 38 Super with 130 grn FMJ and Win 231. These are the components I'm stuck with at this time due to an injury. All my manuals. Lyman,Speer and Lee do not cover this bullet or the powder (lee has 1 entry).
I'm looking for a minimum power target load for a Colt 1911 (80 series). any help is appreciated.

0

• 

  haroldchrismeyer

  July 04, 2005 14:03

  Anyone want to give their pet loads for 38 super?? It is for open class in USPSA.

  0
• 

  richbug

  July 04, 2005 15:54

  I have only ever seen 1 load listed in any reloading manual that would make major, while still being within sammi specs for pressure. I believe it was Hodgdons LIL gun powder.
  
  .

  0
• 

  haroldchrismeyer

  July 04, 2005 17:15

  I know that generally the loads that go major are above the recommended pressure. Now that most of the open class shooters have gone to 9mm luger and are making major, I can imagine what kind of pressures they are running.

  0
• 

  shootlow

  July 04, 2005 21:08

  10.5 gr SP2 (if you know where a supply is let me know all most out)
  124 gr Montana Gold JHP this load is for a hybred comp
  with a plain comped gun back it down to 8.0gr and see how it cronos and runs
  also try 8.5 gr of HS7 and work up
  
  DVC
  
  
  
  "Go over,go under,go around,or go through.But never give up."

  0
• 

  1911a1-fan

  July 06, 2005 18:40

  ramshot silhouette will make power factor for the .38 super
  
  
  http://www.ramshot.com/powders/loadguide.php#

  0
• 

  RadCat

  July 09, 2005 21:39

  Try using around 8.3gr. to 8.9gr. of Vihtavuori 3n37 (very carefull at increments) with the 121 - 124gr. JHP bullets out there, Montana Gold, Star, Winchester and Remington. Chrono it to adjust making major and stop after you do so. Make minor adjustments in bullet seating depth and for accuracy and taylor it to your gun. Pressures are usually adequate. I assume you will be using small "rifle" primers. I use Winchester primers.
  
  You should get a good balance of gases and fps to do the job and work your comp.
  
  ______________________________________________
  
  "If it ain't broke, fix it anyway... make it better!" (RadCat)

  0

Please sign in to leave a comment.