Skip to main content
Help Center Community Shop

Fire-lapping a rifle barrel

Comments

2 comments

  • Der Gebirgsjager
    Fire lapping involves rolling jacketed bullets over powdered abrasive on a hard, flat surface so that the abrasive becomes imbedded into the jacket material. The bullets are then fired through the barrel using progressively finer grades of abrasive, reducing or removing machining burrs and rounding rough edges and giving an overall polished appearance to the bore. Changes in accuracy can be anywhere from a little better to a great deal better; but usually some improvement is noted. There have been quite a few articles written on the process over the last couple of years. A couple of the more recent are: Barrel Break In & Restoration, Norman E. Johnson, American Rifleman, Feb. 2000 Precision Reloading: Fire Lapping A Rifle's Bore--Can It Hurt? Does It Work?, Rick Jamison, Shooting Times, Aug. 2000
    0
  • v35
    I hand lapped a 36 cal percussion underhammer rifle and lightly choked the muzzle. The gun was very accurate.When you hand lap a barrel you can feel the high or rough spots and work on them until there is an even drag on the lap. You keep away from the front two inches untill you're finished then give it some evening strokes.
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?