.44 Mag. Accuracy
Trying for 75 yd. accuracy.Any suggestions as to reloading specs. I can use to shoot small groups.I load with a DillonModel 550.
0
-
Hot,warm or medium?Cast or jacketed?Hunting or plinking?cpermd 0 -
What gun and barrel length?
GUN CONTROL: If you're not outraged, you're not paying attention!kimberkid@gunbroker.zzn.com0 -
Ruger RedhawkDeer Hunting 0 -
Speer 240 grain jacketed HPWin 296,24 grains of powderNosler 300 grWin 296 22 grainscpermd 0 -
Here is what my husband loads for me to shoot in my super redhawk.H4227 24 grains240 Jacketed hollow pointCCI magnum primer1600 ft per sec 0 -
Her husband also can also get 1" groups out of his contender at 150yds (so he tells me anyway).For killing:300gr. XTP24.5grs H1101260 fps out of a super Blackhawk 7.5" pipeI use magnum primers.It will will do anything short range including chevys. Kicks like a mother though.Andy 0 -
Reply to MetzI don't want to compare this with a Contender.I have seen them shot.Makes me want one. 0 -
Good reason to want a contender. I shoot a .210 grain serria in my 29 smith (I bought it back in "81") Knocked down the ram on the 200 meter range. .18grs 2400 0 -
try 19.5gr. accurate #9, 240gr bullet 0 -
I used a 250 grain gas checked linotype over 24 grains of H-110.Recoil was so severe it peeled the skin on the web of my hand and about 50 rounds later, sheared the sight screws on the Contender. Now I use the same bullet over 12 grains of HS-6,accurate,kills deer and will not beat me or my gun quite so bad. 0
Please sign in to leave a comment.
Comments
10 comments