BSA BOLT ACTION RIFLE BOLT REMOVAL

FOXMOUNTAIN

November 28, 2002 13:08

I JUST PICKED UP A BSA 300 WINCHESTER MAG BOLT ACTION RIFLE AND I CANNOT GET THE BOLT OUT OF IT. I NEED SOME DIRECTIONS ON THIS TYPE OF ACTION FOR BOLT REMOVAL, THANKS

0

• 

  nononsense

  November 28, 2002 15:07

  Foxmountain,
  
  Is this a Herter's BSA U9 rifle? If yes, all you have to do is make sure that the rifle is empty, both the chamber and the magazine. Let the muzzle rest on the toe of your shoe, open the bolt but not all the way to the stop then push the trigger forward while gently removing the bolt. It may require a little jiggling at first especially if the lubricant has set up a little with dirt and dust. If it is real sticky then a good cleaning and re-lube is in order.
  
  Regards.

  0
• 

  FOXMOUNTAIN

  November 28, 2002 16:11

  THANKS FOR THE ADVICE. IT IS A BSA GUNS LTD ENGLAND, IMPORTED BY EAGLE ARMS NY. I TRIED IT AND THE TRIGGED SEEMED TO HAVE NO GIVE FORWARD, I WILL SPRAY IT UP AND TRY IT AGAIN, BUT I AM NOT SURE THAT IT IS THE SAME BSA, THANKS AGAIN
  JOHN

  0

Please sign in to leave a comment.