Remington 10 A 12 guage
One of my friends had a 12 guage that we took apart after we were done shooting it. He cleaned it and can't figure out how to get it back together. It says 10 A 12 on the barrel. Was wondering if anyone could throw some assembly instructions my way?!?!
Orignal prankster
Orignal prankster
0
-
How far did you take it apart? 0 -
He took the barrel off. The barrel will go back on, but the pump won't go back to where it is supposed to. It won't slide back into place. 0 -
Make sure the bolt is all the way forward before putting on the barrel assembly. Also on the magizine tube are tworaised lugs that need to be lined up for the forend to slide to its rear most position. 0 -
I have been through this the last couple of days. I could not even get the barrel all the way in until I found out you have to pull the trigger to release the extractor. I also always seem to have trouble getting the action bar in the right place just like your problem. After a few tries and holding the bolt against the top of the receiver it always manages to engage somehow. Try holding the gun upside down and press on the bolt. 0 -
Well thanx for the help. I will let him know and we will see what we come up with. Thank you all!!
Orignal prankster0
Please sign in to leave a comment.
Comments
5 comments